DCC Tank turned into Giant Clearomizer - video

[jordypants]

I made this using a DCT, 100% cotton yarn for wicking material, and spare clearomizer parts. The coil is about 8 'wraps' and metered out at around 6ohms using 32g nichrome. The quality is bad because I used my cell phone camera. Didn't feel like getting out my digi. Anyway, I ran 2x 18350's at roughly 7.4v unregulated. Produces more vapor than any production unit I've ever tried. I'll likely rebuild this and do a pic-by-pic tutorial. Enjoy.

 

[Njt07]

please do the pic by pic, i cant view videos at work...

 

[jordypants]

Will do, I'll get started tomorrow.. They blocked the streaming ports? That's dreadful.

 

[mwa102464]

I dont get it, what's the difference from just taking the dual coil stock carto and cutting the tube half way off and sticking it in the tank ? you can pull the wick and replace the wick with your wick if ya wanted. Why the fudged up connections ?

 

[jordypants]

Fudged? I put in a new, higher resistance coil in to work with the higher voltages. Think about the size of the hole in a pre-punched dual coil carto. It's tiny, very tiny. Smaller than 1/16. Leaks and flooded liquid are still common problems with DCT's. Suppose I cut the top half of one off and then stick it in there with a tank full of liquid. Not going to fly. Using the CE2 parts, adding a thicker o-ring to the connector of the CE2 and then using an atty tube to seal it in the bottom plug made much more sense. Maybe my intentions will be clarified with a tutorial.

 

[fused2explode]

I'd love to see this step by step

Sent from my GT-I9300 using Tapatalk 2

 

[HawkeyeFLA]

Hmmm. Subscribing to this to see the step by step when it posts.

 

[johnlacie]

Nice one! I have been using something similar for several months now and this is really simple to build. Mine uses a modified/repairable regular CE2 Clearomizer which is screwed in to the bottom of the tank using a 510 adapter/connector (LavaTube eGo Adapter).

 

[jordypants]

Hmm, pretty clever design. I'm going to put one of those together and a (shorter) tutorial. Seems much simpler than my rig.

 

[TomCatt]

Cooool

 

[TomCatt]

One of these 510 battery extenders should work, shouldn't it ?
510 Battery Extension

 

[johnlacie]

One of these 510 battery extenders should work, shouldn't it ?
510 Battery Extension

Those are too long and the black sticker would prevent it from fitting into the DCC cap. The shortie 510-510 adapters are also too short. The Ego adapter from Apollo would work.