Diy atomizer for everyone ... or brilliant Russians engineering...

[warbdan]

I built two today. Took me an hour or so, but well worth it. They work well!

Sent From Outer Space On My Android Tablet Using Tapatalk

 

[urquidezj]

Pictures or it didn't happen! Haha jk. I made this one today. Well took me four days cuz it kept pissing me off.

 

[warbdan]

Here you go...

Sent From Outer Space On My Android Tablet Using Tapatalk

 

[urquidezj]

Nice! How's it performing for you?

 

[dragonbone]

WOW!! So nice! I would love one, (maybe two or three). It will look awesome on my Provari. Where can I get one please???
I like the eGo tank thingy on it...

 

[warbdan]

You build it. If you open the hole up carefully you can use any drip tip. The eGo carts look goofy.

It's performing better than any atty I've bought and it's about to be better. My stainless steel mesh came in today!

Sent From Outer Space On My Android Tablet Using Tapatalk

 

[urquidezj]

I didn't wanna be the one to say u make it LOL, I got mine with ss wicket nothing compares.

 

[thenn]

still working on mine, but i lost half my tools... kinda hard to pop the center only using a hammer & roofing nail.

 

[urquidezj]

Just hit it with a hammer bro that's how I got mine out. Watch your fingers tho

 

[warbdan]

I left the guts in mine. Push the center post out of your battery connector leaving the grommet in place and slide it into the rca connector. Then, you can cut off the end of the rca post and you've got a sealed center post! Solder on your positive and negative posts, wind your coil/wick. Lay the juice to it and vape. I've dripped 10 drops in mine and none of it leaked out.

Sent From Outer Space On My Android Tablet Using Tapatalk

 

[the ob]

I wish someone would post a easy step by step of how to do this.

 

[northhar]

I wish someone would post a easy step by step of how to do this.

Some pict's and some more instructions in this link, along with another link besides this one..
http://www.e-cigarette-forum.com/forum/atomizer-mods/238683-how-rca-jack-atty.html

I working on doing this also..
Have fun..

 

[Str8V8ping]

What are you guys using for the floroplast/teflon and the coil posts . Im not understanding how the 3 different RCA stereo connector come to make one piece .

 

[the ob]

Some pict's and some more instructions in this link, along with another link besides this one..
http://www.e-cigarette-forum.com/forum/atomizer-mods/238683-how-rca-jack-atty.html

I working on doing this also..
Have fun..

We need a build for dummies explanation of how yo do this.

 

[warbdan]

I only used 1 rca jack to build this one. The Russians used an rca jack and an audio jack because the audio jack sleeve is longer and they needed room for the eGo T type piercing needle in there. If you plan to use drip tips you can do this with only an rca jack, a couple of safety pins for posts and a coil/wick. Here are some pics of mine rewired with SS mesh for a wick.

In this pic you can see where I cut off the rca jack's center post, turning it into the center post for the battery connector.

Sent From Outer Space On My Android Tablet Using Tapatalk

 

[CaminoDiablo]

We need a build for dummies explanation of how yo do this.

Well I fit into that into the dumb part pretty good. It took me over a week to get one working right but now I can build a atty in under 10 minutes, that's soldering, wrapping the coil around the wick and shielding it. You just need to work at it. Check out scubabatdans picture at the bottom of this thread,http://www.e-cigarette-forum.com/forum/modding-forum/239865-why-am-i-shorting-out.html The thread is about my problems with building one. I got walked step by step by both scubabatdan and meatsneakers. Guys are awesome and have the answers. I can help you if you want, PM me and together we can get one working

 

[WillyB]

With parts this cheap, it's best to just buy the ones linked to. Things tend to fall in place, and the explanations start to make sense, once you have the stuff in hand.

 

[BJ43]

With parts this cheap, it's best to just buy the ones linked to. Things tend to fall in place, and the explanations start to make sense, once you have the stuff in hand.

Please link us to the RCA jack used... Thanks

 

[northhar]

Please link us to the RCA jack used... Thanks

The problem with this build it is being done by different people over three threads and in 2 places, here and "Atomizer Mods".
Here is a link to the 1/4" phono jack;
RadioShack
That link came from this thread;
http://www.e-cigarette-forum.com/forum/atomizer-mods/238683-how-rca-jack-atty-2.html

Then there is this thread;
http://www.e-cigarette-forum.com/forum/atomizer-mods/237114-smallest-repairable-atomizer.html

I have been working on getting one done, I built just an rca jack drip atomizer, just have to add the wire and test.
I had got the wrong 1/4" phono jack, will get the right one tomorrow.You have to make sure the 1/4" to rca plug comes apart otherwise its no good.
As Willyb says it eventually comes together..

 

[BJ43]

The problem with this build it is being done by different people over three threads and in 2 places, here and "Atomizer Mods".
Here is a link to the 1/4" phono jack;
http://http://m.radioshack.com/radioshack/product/detail.do?itemId=2103987
That link came from this thread;
http://http://www.e-cigarette-forum.com/forum/atomizer-mods/238683-how-rca-jack-atty-2.htm

Then there is this thread;
http://http://www.e-cigarette-forum.com/forum/atomizer-mods/237114-smallest-repairable-atomizer.html

I have been working on getting one done, I built just an rca jack drip atomizer, just have to add the wire and test.
I had got the wrong 1/4" phono jack, will get the right one tomorrow.You have to make sure the 1/4" to rca plug comes apart otherwise its no good.
As Willyb says it eventually comes together..

None of your links open...