DNA 200 Cloud Chasing Setup.. IDEAS?
- Thread starter TomsFaded
- Start date
- th_trl_thread_readers 0
- Status
considering your post and your questions, I'd recommend none of the above. Why not build a nice 1 ohm dual coil and get your feet wet?
I'm gonna go ahead and agree with asbestos. Start slow. Are you using the dna200 in temp mode or wattage mode? I'm pretty certain that there is almost no reason to build that low for purely cloud chasing, especially if you're using a regulated mod. Also, a .02 ohm coil is so ridiculous it's not even funny. That being said, there's more to the vape than ohms and watts. Heat flux is pretty important.
I WOULD GO WITH THE WHITEOUT PRE BUY UNLESS YOU PLAN TO BUILD YOURSELF... JUST MY OPINION I LIKE HOW CLOUDMAKER'S MODS LOOK AND HAVE A HOME MADE FEEL TO THEM NOT OVERLY MASSPRODUCED AGAIN IN MY OWN OPINION. HOW LOW IN OHMS CAN THIS DNA 200 BY EVOLV TRUELLY GO? I HAVE AN M-CLASS WITHAN EXTENSION TUBE CANT TURN IT UP PAST 100 TO DRIP CAUSE IT JUST CATCHES RDA'S ON FIRE FROM DRYING THE COTTON LIKE 2 SECONDS AGO I AM BEING SERIOUS TOO.... IS THE DNA CHIP THAT MUCH BETTER AND I DO NOT LIKE LI-PO BATTERIES GREW UP BUILDING RC CARS AND KNOW THEY NEED TO BE PROPERLY CHARGED AND YOUR NOT FITTING WHAT MY $159 CHARGER DOES INTO A COMPONENT ON A TINY CHIPSET CHARGING MONITORING CAN'T BE AS GOOD AS I HEAR IF IT IS I AM TRUELLY IMPRESSED AND ...... I WANT MY $159 BACK!
DNA 200 Ohms/Wattage
0.08ohm - 200 Watts
0.06ohm - 150 Watts
0.04ohm - 100 Watts
0.02ohm - 50 Watts
IF THIS IS ACCURATE OK I AM IMPRESSED BUT DO YOU BIULD THAT LOW ON PURPOSE LOL IDK PLUS I DONT'T LIKE THE WHOLE NI200 LEACHING BUSINESS WHY DIDN'T EVOLV WAIT FOR GRADE A1 TITANIUM? NOW ALL I DO IS WORRY DID I VAPE TOO MUCH NICKEL I MEAN WHEN ITS ON NI200 COILS IN CHINA THATS WHEN I WORRY AND I FEEL AS THOUGH EVOLV OWES US SOME KIND OF EXPLANATION T.C.WAS SUPPOSED TO BE HEALTHIER RITE? HOW MUCH TESTING DID THEY REALLY DO IF THIS COMING OUT NOW? I WILL NEVER VAPE NI200 AGAIN, I AM GUESSING THEY CHOOSE IT FOR IT'S ACCURACY BUT FORGET ABOUT THAT IF THE BUIDING WIRE WAS TOXIC THEY SHOULDN'T OF REALEASED THE CHIP YIHI EITHER... ON A SPERATE NOTE WHO DO YOU KNOW THAT VAPES AT 200 WATTS BE HONEST NOW? HOW MANY DO YOU KNOW THAT REALLY BREAK 60 WATTS?
0.08ohm - 200 Watts
0.06ohm - 150 Watts
0.04ohm - 100 Watts
0.02ohm - 50 Watts
IF THIS IS ACCURATE OK I AM IMPRESSED BUT DO YOU BIULD THAT LOW ON PURPOSE LOL IDK PLUS I DONT'T LIKE THE WHOLE NI200 LEACHING BUSINESS WHY DIDN'T EVOLV WAIT FOR GRADE A1 TITANIUM? NOW ALL I DO IS WORRY DID I VAPE TOO MUCH NICKEL I MEAN WHEN ITS ON NI200 COILS IN CHINA THATS WHEN I WORRY AND I FEEL AS THOUGH EVOLV OWES US SOME KIND OF EXPLANATION T.C.WAS SUPPOSED TO BE HEALTHIER RITE? HOW MUCH TESTING DID THEY REALLY DO IF THIS COMING OUT NOW? I WILL NEVER VAPE NI200 AGAIN, I AM GUESSING THEY CHOOSE IT FOR IT'S ACCURACY BUT FORGET ABOUT THAT IF THE BUIDING WIRE WAS TOXIC THEY SHOULDN'T OF REALEASED THE CHIP YIHI EITHER... ON A SPERATE NOTE WHO DO YOU KNOW THAT VAPES AT 200 WATTS BE HONEST NOW? HOW MANY DO YOU KNOW THAT REALLY BREAK 60 WATTS?
FROM READING ABOVE UNLESS YOU ARE AWARE AND KNOW OHMS LAW STICK WITH STUFF THAT IS BUIT FOR YOU I KEEP TELLING ALL MT FRIENDS READ OHS LAW AS I AM ELECTRICIAN AND HAD TO LEARN THIS MANY YEARS AGO THEN YOU WILL HAVE A BIT MORE KNOWLEDGE OF WHAT YOUR BUIDING AROUND WHAT OHM IT IS HOW A DUAL COIL DIVIDES THE RESISTANCE AND JUST KNOWING HOW TO CHECK THE OHMS ON A AUTO RANGING DIGITAL MULTI METER THAT WILL COST YOU $3... MY ADVICE TAKE IT SLOW MAKE SURE YOU KNOW WHAT YOU ARE DOING NEVERAND I DO MEAN NEVER SKIMP ON QUALITY BATTERIES IF SUB OHMING AND TRY TO USE IMR SAFE CHEMISTRY BATTERIES. JUST SO YOU KNOW WHAT COULD HAPPEN IF YOUR A NOOB LOOK UP A LI-ION BATTERY VENTING ON YOU-TUBE TELL ME IF YOU WANT THAT IN YOUR FACE.... POINT HERE TAKE YOUR TIME TO LEARN THE BASICS DON'T JUST JUMP IN HEAD FIRST IN THE SHALLOW END OF THE POOL AND DON'T BELIEVE EVERYTHING YOU HEAR I DOUBLE AND TRIPLE CHECK STUFF AND I HAVE BEEN DOING THIS FOR YEARS!KNOWLEDGE IS POWER AND WHO DOESN'T WANT POWER ESPECIALLY IN THIS FORUM, SERIOUSLY DO NOT TAKE THIS LITELY DO YOUR RESEARCH DON'T ALWAYS LISTEN TO THE KID AT THE B&M I KNOW MORE THAN ALMOST EVERY PERSON I HAVE EVER TALKED TO THAT WAS ON THE OPPOSITE SIDE OF THE COUNTER AND I WILL LET THEM KNOW HEY THIS IS INCORRECT BUT THE KNOW IT ALLS GOD I CAN'T STAND THE KNOW IT ALLS NO BODY KNOWS IT ALL IF THEY TELL YOU THEY DO TURN AROUND AND FIND SOMEONE WHO REALIZES THERE IS ALWAYS SOME ONE ELSE OUT THERE WITH MORE KNOWLEDGE THAN YOU IT'S NOT A CONTEST SOME PEOPLE KNOW THING BECAUSE THEY ARE ELECTRICIANS OR LOW VOLTAGE ELECTRICIANS OTHERS MAY KNOW FROM WORKING UNDER SOME ONE WITH A VAST KNOWLEDGE OF MOST THINGS IN THE VAPPING WORLD BUT EDUCATE YOUR SELVES DO NOT RELY ON EVER ONE ELSES MATH ETC. THE MORE YOU KNOW THE BETTER OFF THE ENTIRE IDUSTRY IS!!!!! AND GO JOIN YOUR LOCAL PRO VAPOR ONLINE GROUPS THAT WILL LEAD YOU TO THE BIGGER ONES YOU KNOW WHICH GROUP WE SHOULD ALL BE MEMBERS OF I AM NOT GOING TO MENTION IT BECAUSE IF YOU DON'T KNOW IT YOU NEED TO GO BACK AND READ READ READ!
Interesting thread turn I guess. 
For "cloudz bro" I'd go with quad coils on a velocity. 26 or 28 AWG Ti, 11 wraps each.
For "cloudz bro" I'd go with quad coils on a velocity. 26 or 28 AWG Ti, 11 wraps each.
@suprarb are you ok? That was a lot all at once. There's a lot to cover in those messages, but I highly recommend using the search box in the upper right corner to look up different threads for health concerns. And it might be a good idea to get your elbow off of the caps lock. My eyeballs hurt from reading all that.
Just a curiosity question here, but how were you planning to control the accuracy of your builds to 2/100ths of an Ohm, and do you have a 4-wire Kelvin meter to measure it?
- Status
Similar threads
- Locked
