Dovpo gx - 200 giveaway contest !!

[Seleya]

#25

Max charging current : 800mA

 

[olscratchy]

# 26.
Lowest resistance 0.2ohm

 

[Seleya]

#26

Automatic circuit -breaker triggered after 15 seconds smoking.

 

[Seleya]

#27

It is like a Mechanical mod with a protection function

 

[olscratchy]

# 27.
Low voltage protection < 3. 2V

 

[KC1BLE]

#51 This is an aluminum flat black mod and will not show fingerprints easily

 

[olscratchy]

# 28.
Over current protection > 30A

 

[KC1BLE]

#52

The designs and model number are painted onto the device

 

[sungbd]

#57

Working voltage 3.2- 4.2V

 

[sungbd]

#58

Max output 20A

 

[sungbd]

#59

Lowest resistance 0.2ohm

 

[olscratchy]

# 29.
Two 18650 batteries parallel connection, can be charged with
micro USB cable or 18650 charger.

 

[KC1BLE]

#53

The back door or battery door is held in place by firm magnets and it has a slight recess on the bottom of the mod that allows easy removal of the battery door

 

[olscratchy]

# 30.
Short -circuit and reverse connection of the battery power terminal ,
will be protected

 

[KC1BLE]

#54

There is an OLED window beneath the firing button that is on the left side of the mod just beneath the top 510 connection. It displays the remaining voltage of the battery when depressed, there are no other numbers dispalyed

 

[olscratchy]

# 31.
The height of the connector's positive electrode can be adjusted
by screwdriver

 

[KC1BLE]

#55

The battery box is made of plastic and takes 2 - 18650 batteries in parallel. It will only fit flat top batteries. The spring and contacts are firmly in place.

 

[KC1BLE]

#56

The 510 connection is on the top of the device on the same side as the firing button

 

[KC1BLE]

#57

It has an adjustable connection with what looks like a small adjustable brass screw as the firing pin. It is flush mounted so tanks can be screwed on and will be flush with the top

 

[olscratchy]

# 32.
Charging voltage: Micro charger DC5V