Drags per squonk?

[The Ocelot]

Hi

I'm sure this has been asked and answered somewhere, but I haven't been a newbie for awhile and it's fun to have other people do the work for me.

Is there a rough estimate of how many drags I might get with an average pressure squonk from a regular mini using an LR306? I don't have a Lungometer, so I don't know the resistance of my respiratory system, which I hope won't be a problem. I'm used to dripping and the bottom-feeder I'm using now doesn't sound the same. That may seem odd, but you'll just have to trust me. It seems like after squonking some of the liquid is sucked back into the bottle, so I don't know how wet the atty is without a tentative draw. I'm sure with practice I will get it down and I've ordered a clear drip tip so I can see the liquid, but I'm still curious.

Thank you in advance.

Oh, and since Statistic is insignificant, I don't think he should answer.

 

[nerak]

Hi

I'm sure this has been asked and answered somewhere, but I haven't been a newbies for awhile and it's fun to have other people do the work for me.

Is there a rough estimate of how many drags I might get with an average pressure squonk from a regular mini using an LR306? I don't have a Lungometer, so I don't know the resistance of my respiratory system, which I hope won't be a problem. I'm used to dripping and the bottom-feeder I'm using now doesn't sound the same. That may seem odd, but you'll just have to trust me. It seems like after squonking some of the liquid is sucked back into the bottle, so I don't know how wet the atty is without a tentative draw. I'm sure with practice I will get it down and I've ordered a clear drip tip so I can see the liquid, but I'm still curious.

Thank you in advance.

Oh, and since Statistic is insignificant, I don't think he should answer.

Lots of variables in that answer. First, if your juice is being sucked back down into the bottle you might need to loosen your cap a tad.

The length of your draw, the force of your draw both will impact how fast the coil burns up the juice.

If you are blind squonking, drawing without firing and squonking, then listening for the gurgle of the juice, then you should have a atty that is right for vaping.

I can usually go 5-7 vapes on one squonk with a LR 306 1.5 atty.

 

[Statistic]

and here I was all set to say "I have no experience with bf cartos but glad to see your furry mug around these parts"

Insignificant may I be, nevertheless, Statistically speaking... welcome to REOville, kitty cat.

 

[The Ocelot]

and here I was all set to say "I have no experience with bf cartos but glad to see your furry mug around these parts"

Insignificant may I be, nevertheless, Statistically speaking... welcome to REOville, kitty cat.

I'm not using a carto, I'm using an LR306 atty. I tried a carto, but couldn't figure out the point. I have tanks for cartos and without a tank I would rather drip.

Thank you for the welcome. I apologize in advance for snarky, non-sequiturs and thread derailments. I can't help myself.

 

[ltrainer]

i got about 6, 7 hits from lr 306s.

 

[Statistic]

Oh, whoops.. I have some homework to do.

Speaking solely for myself I forgive you in advance for any and all snarkiness, non sequiturs and thread derailments. You know we kinda like em anyways

 

[FogHawg]

Hi Kitty! I have no experience w/those attys, but welcome to Reoville!

 

[The Ocelot]

Hi Kitty! I have no experience w/those attys, but welcome to Reoville!

Thank you. The LR306 is quite lovely. It's the atty I learned to drip with many moons ago. 1.5Ω and hits like a horse and carriage.

(From my newbie info file)

 

[FogHawg]

That's gonna look NICE on your Reo Kitty!

 

[nerak]

Thank you. The LR306 is quite lovely. It's the atty I learned to drip with many moons ago. 1.5Ω and hits like a horse and carriage.

(From my newbie info file)

They were my favorite to use till I started into RBA's. Now nothing can compare to the RM2!

 

[The Ocelot]

They were my favorite to use till I started into RBA's. Now nothing can compare to the RM2!

1.5Ω is low enough for me at the moment. I am not Portuguese

 

[Della Cirque]

I only get 4-5 drags per squonk on an atty (306 or 510), but tend to take long drags.

 

[nerak]

1.5Ω is low enough for me at the moment. I am not Portuguese

The sweet thing about the RM2 and other RBA's is you can do a 1.5 coil or take it higher or lower. If you are using a VV REO then you might want the higher ohms. Nothing hits the sweet spot for juices like the RM2!

 

[The Ocelot]

The sweet thing about the RM2 and other RBA's is you can do a 1.5 coil or take it higher or lower. If you are using a VV REO then you might want the higher ohms. Nothing hits the sweet spot for juices like the RM2!

I got the regular mini, not VV. 1.5Ω is fine for me, it's rare that I vape 9w anyway, I'm all about cool...

 

[Rhapsodies Fire]

HI Ocelot
When I was using atties, I was rather partial to the 306. And I would get about 4-6 drags per squonk. Mine were 1.5-2.0Ω depending on the flavor of my juice. And nearly always used 100% VG.

 

[MamaTried]

Oh, whoops.. I have some homework to do.

Speaking solely for myself I forgive you in advance for any and all snarkiness, non sequiturs and thread derailments. You know we kinda like em anyways

Speaking of thread derailments...

Any REONauts who haven't read Ocelots blog are in for a treat.

Gonna be a real hoot now that the Provarinati Princess has come to ReoVille...

 

[harley05]

I'm a blog noob. Where do I find it? I'm Ed btw

 

[The Ocelot]

I'm a blog noob. Where do I find it? I'm Ed btw

Hi Ed! You just click in a member's avatar where is says "Blog Entries" and it will take you to that section. There are a lot of cool blogs to browse through. Members share all kinds of things.

 

[pdib]

1.5Ω is low enough for me at the moment. I am not Portuguese

Imagine if you were Hungarian. Lordy, what would that put you at . . . . 0.5Ω?

 

[The Ocelot]

Imagine if you were Hungarian. Lordy, what would that put you at . . . . 0.5Ω?

In Hungarian it would be Hun not Ohm. 0.5ξ