Drilling airholes on the TOBH

[Purisato]

Alright so I bought a TOBH for the sole purpose of cloud chasing with it. Now so far , I've absolutely love it. Hits well , and the stock airflow isn't too bad. I put some 22g .13ohm dual micro coils on it. Which it isn't going to bad , but for clouds my .36 26g nano's on my Trident is beating it. So my question is would perhaps adding a few more airholes (perhaps in the CCI Atty style) help any at all? Thanks in advance for the help!!

 

[classwife]

Moved to Rebuildable Atomizer Systems from the Modding Forum - Atomizer mods

 

[TheKiwi]

Or you could start by drilling and merging the 3 airholes into a single slit. That alone will increase airflow like crazy


Burping out loud using Tapatalk

 

[CRW78]

I had 1 more hole drilled on each side, above the middle hole.
I can't remember off the top of my head what size, but it's just a tad bigger than the stock holes. Also wicking matters with the micros. I run micros all the time and the clouds are immense. I wick them with a little pillow underneath a tiny tail of that pillow over the top, keeping the coil ends exposed and open.

 

[brianc11111]

i got one yesterday for the sole purpose of cloudchasing....
drilled out all three holes with a 1/16th drillbit right off.
lots of clouds and cools it down nicely.....
i really like crw78's idea....but with the addon that drill outside two and the top hole 1/16th

 

[jaxgator]

Or you could start by drilling and merging the 3 airholes into a single slit. That alone will increase airflow like crazy

Good idea! I'm going to go this route when I dremel off those pesky air blocker tabs. Perhaps this evening when I get home. Although I like my TOBH, it could be much more.

 

[G-weezy]

I drilled 6 more holes.

 

[Nick N]

"Hole-y" smokes!

 

[G-weezy]

Here is a link to the build. 2 styles of wicking. iTeo and U wick. Both ways I can take about 10 pulls before re-dripping.

TOBH - Imgur

 

[juggalofisher88]

I did this to my TOBH hits like a champ

 

[Chris405]

So i also modded my TOHB

in the first pics i combined all three holes on both side and enlarged it just a little.

In the second and third pics im showing how i removed both tabs that controlled airflow, i like my coils in front of my positive post.

 

[CRW78]

Chris405: nice! My tabs are also soon departing. Lol!

 

[juggalofisher88]

Yeah them air holes had to go, still thinking of slotting the airflow on myne my biggest problem tho is how to do it as, is it easy to do with a drill?

Here's my currwnr setup quad ribbon micros .3ohm

Not sure if you can see airholes I put in negative post or not

 

[Chris405]

i used a rotary tool set i picked up at a local hardware store for 9 bucks. I used a diamond rotary bit to slot the holes and a cutting wheel to cut the tabs off and sanded them smooth.

 

[jaxgator]

Ok, I gave it try tonight. Sloppy work, as I don't have steady hands anymore and don't really have the proper tools but what the hell, it's a clone after all. I'm actually pleased with the results even though it isn't pretty. Lung hits like a champ. Anyway, to vapefinity and beyond!

TOBH clone before...

TOBH clone after the destruction...

And before you ask, yes, I washed the entire atty and lined up the center post hole as evidenced by my build in this image...

Is it normal for the ohms to increase when the coil is wicked? Serious question...

After a night of vaping a local B&M's Cappuccino...

 

[juggalofisher88]

i used a rotary tool set i picked up at a local hardware store for 9 bucks. I used a diamond rotary bit to slot the holes and a cutting wheel to cut the tabs off and sanded them smooth.

Hmm my ole lady would flip I buy more none vape tools lol,
I used a grinder to remove my air tabs and lower the lip on my deck, needs a good. Sanding tho..
Have you noticed it doesnt leak anymore!

 

[Chris405]

Hmm my ole lady would flip I buy more none vape tools lol,
I used a grinder to remove my air tabs and lower the lip on my deck, needs a good. Sanding tho..
Have you noticed it doesnt leak anymore!

well for me i wasn't having a leaking issue. The bits came with the set. 9 bucks at harbor freight.