Dripping from a VV box mod... what atty??

[elan123]

I am going to be dripping using my VV box mod... so what attys should I purchase for the best drip experience?

I want flavor the shine through the most, not concerned about throat hit really.

Please recommend attys that I should use and provide a link to them. There are so many different kinds and brands and numbers etc that without a link the recommendation just won't really help me.

Thanks!

 

[mistinthewoods]

You don't say what connecter you have on your VV box mod but whatever it is you will find a selection of really good attys here.
Customer Login
I would avoid LRs or Dual Coils if you're using an inexpensive plastic box mod. Without protective circuitry the high amp draw is tough on batteries. LRs are designed to mimmic high voltage anyhow, you have access to the real thing.

 

[Nomoreash]

That's the beauty of VV it can be used with a wide range of ohm ratings and still be able to find your sweet spot. In general I'd say look for somtething in the high 2s, low 3s ohm rating that should give you a wide range of voltage settings and not stress the batteries.

 

[Cranston McCloud]

I have been using a VV box mod for about 4 months now.
My favorite atty is a 306, in the 3.2-3.4 ohms rating, from IkenVape.
I have had it over 6 volts and is working like a charm. Current 306 has been on my mod for over 2 months.

 

[Richie G]

I am going to be dripping using my VV box mod... so what attys should I purchase for the best drip experience?

It's good to see that you want to be prepared for the best experience. But, you will be best served to use whatever you have been using to this point and navigate the voltage until you're most satisfied. That said, I would stick with standard atomizers, like the Joye 510 (about 2.2 ohms) or higher... assuming you bought a 510 connection based mod.

Good luck.