Dripping Messy

[Jonner]

I also posted this in the ATV section, but I'm hoping for a quick response here. I'm dripping with a 510, and it leaks around the battery to atty connection, is there a way to avoid/correct the leakage?

P.S. Sorry with all of the questions lately, I'm trying to get off the analogs, and it's going well so far, just a few issues left to deal with.

 

[B-Rad_The_Mad_Vapr]

Not a dripper myself, only do it to sample, but you should only drip a few drops about 3 to get 5-7 good hits. If your only taking a few hits drip less.

 

[thh69]

you are over filling. if you hear a gurgling sound its too full. 2-3 drops is all you need

 

[KissMint]

brand new atty or recent cleaned atty I use 6 drops at the beginning, vape, then 3 drops until I get that slight burnt taste (after about 10'ish puff) then 3 more drips.

 

[keyzygirl]

Get some cartomizers.

 

[uba egar320]

Try this. Take the atty off, and blow through the end you suck on into a paper towel. Do this until nothing comes out. Then wipe all excess juice off of the contacts. Add a couple of drops(maybe 3 on a completely dry atty) and try taking a few puffs. If this doesn't work, and it still leaks you may have an atty that isn't wicking very well. The bridge(microphone looking dohicky) may be gummed up and not absorbing the juice you drop in. You can clean it, or remove the bridge and drip directly onto the coil. Once you remove the bridge, you can no longer use carts as there is no way to move the liquid from the cart to the coil. If you are interested in cleaning, or removing the bridge there are instructions for both on ecf. Just use the search feature. Good luck.