Ego Mega Atomizer Type A

[jmartinix]

Hello,
Just wondering if anyone on here uses these, and if so, what are your thoughts on them? I just switched to them from the 510 tank, and I'm not sure if they are working properly. They seem to gurgle a bit when I use them with the cart attached. I thought maybe I'd flooded the atomizer, so I tried blowing it out. It is still gurgling a bit however. Maybe this is how it is supposed to be, and I'm just use to the tank not doing this.
Any idea's?

 

[Iffy]

Is it a gurgle or a series of small pops? How is the vapor production? Since you blew out the atty, have you pulled the cart and tried a dry burn? Any nicquid on the batt center terminal?

You're right, usually gurgle = flooded.

Keep us posted...

 

[jmartinix]

I didn't try doing a dry burn, but guessing I should then? It is definitely a gurgle, and not a popping sound. the battery terminal is also clean.
If I'm using a cart, after I do a dry burn, should I re-insert the cart and leave it to wick for a bit? This is first time I've used anything other than a tank system. I know how the wicks in the tank work, but not too sure about these.
Thanks

 

[Iffy]

If ya do a pulsing dry burn until there is almost no vapor and ya see a glow, then I would put a drop or two to 'prime da pump', so to speak. Note: Some folk really frown on dry burns. But I've yet to lose a coil doing so.

Good luck!

 

[The Big Chief]

Gurgle can come from the atty, or inside the cart itself, just inside the hole in the mouthpiece. Might be worth checking the liquid catch chamber ( by sticking a tool of some sort inside the mouthpiece hole and popping the end off. If its full of liquid, dry it out)....anymore questions, pm me. If the attomisers flood, it'll wind up all over the battery. Personally I prefer the type B atties, low resistance of course, but both types flow liquid quickly. So, these are best for heavier vapers. But by far teh best simple atty setups available still today.
And when not in use, always carry or store with the cart down.
Not to step on toes, but I wouldnt recommend dry burning just yet for this person. Its not worth the hassle, and best to have a spare or two around while learning the proper ways to do it.

 

[LeftCoastVaper]

I've found that nothing kills a Type B faster than dry burning. If it's gurgling too much, just remove the cart and blow it out till it's dry. Also, avoid dark juices - another coil killer. Otherwise they're great, and better @ 3.7-4v. Best hit of anything I've tried so far.

 

[LeftCoastVaper]

Btw, I still have one that I tried to burn. It now registers 800 ohms. Anyone have a 110v AC mod which needs a new atty?