eGo not working, help, ideas?

[Dolly Dagger]

Yesterday after charging my eGo just wouldn't work. No flavor/vapor coming through whatsoever. The button blinks, I've tried changing the tightness and cleaning the contacts with rubbing alcohol. I've tried throwing it back on the charger but the light is already green. I'm not very technical about the inner workings of these yet. Any ideas/help would be greatly appreciated!!!

 

[Switched]

raise the post (positive/centre) post on your battery. You are not making contact with you charger

 

[patkin]

I agree your battery post may need raising just a tiney bit. You can use the point of a small nail clipper file or anything that will fit to gently pry it.... but do you hear any gurgle or crackle when you push the button with your clearo on? Hold it to your ear. If you hear a sound, your atty could be flooded instead.

 

[r77r7r]

Plug your charger into USB first- green light comes on. Screw battery on, turning it in slowly. If you see any Red, leave it there at that point to charge. The light on the battery also needs to blink a few times- if not, do the post- lifting thing.

 

[Dolly Dagger]

Thank you for the help, I tried pulling out the battery post & nothing. I took it to the local vape shop for help and he drained it and pushed/screwed the parts of the coil tighter. It worked, then I got home and cleaned it out to change flavors and it was not working again. I pushed everything on tighter inside and i works again. I think I got a bit of a lemon tank!

 

[azndrifter]

Nothing wrong with you're battery. It's doing its job in detecting that you have a short in your tank. The coil or leads is touching the sides in side the tank. Ego's have the battery short protection

Sent from my SM-N900W8 using Tapatalk