eGo ONE tank series – CLR coil

[Shawn Hoefer]

I've read the Pico is great for flavor, but I never knew you could use the CLRs with it. Is there a particular version of the Pico that I should get? What about this Pico clone from fast tech? Are the authentics still available? Super expensive?

$9.05 Pico Styled RTA Rebuildable Tank Atomizer - 3ml / 316 stainless steel + acrylic / 22mm diameter at FastTech - Worldwide Free Shipping

Not that one... this one...

Search: Pico-s: m.FastTech.com

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[pufZeppelin]

Is the only difference between the regular CLR coil and the titanium CLR coil the wire that is used?

simply YES
but going a bit deeper:

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

so you can strip all three down TOTALLY, throw all parts in a box
then reach in and pull out ANY PARTS to build a CLR coil (all parts inner-change)

​

 

[ChelsB]

simply YES
but going a bit deeper:

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

View attachment 644239

so you can strip all three down TOTALLY, throw all parts in a box
then reach in and pull out ANY PARTS to build a CLR coil (all parts inner-change)

​

Thanks! Do you like them equally?


Sent from my iPhone using Tapatalk

 

[JustWondering1]

Not that one... this one...

Search: Pico-s: m.FastTech.com

Sent from my SAMSUNG-SM-N910A using Tapatalk

Thank you very much!! I copied the link and put it in my FT Wish List word file! I can't wait to order from FT again!

 

[pufZeppelin]

Thanks! Do you like them equally?

yes

since they are all the same, with the ONE EXCEPTION the 1.0 pin is ONLY 1.8mm which is to restrictive for MY liking... (I dig the 3.5mm hole)

 

[JustWondering1]

simply YES
but going a bit deeper:

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

View attachment 644239

so you can strip all three down TOTALLY, throw all parts in a box
then reach in and pull out ANY PARTS to build a CLR coil (all parts inner-change)

​

It really is ingenious! I am so happy you started this thread and I got on the Ego One CLR train! Thank you!

 

[ChelsB]

They are wonderful coils! I was very happy when I realized that my forgotten purchase of the tron-s, was CLR friendly!


Sent from my iPhone using Tapatalk

 

[pufZeppelin]

They are wonderful coils! I was very happy when I realized that my forgotten purchase of the tron-s, was CLR friendly!

a sweet way to go, surprise vapemail...

 

[Katdarling]

100watt iStick is way too big. I dislike big...........

I can dig-it -- BUT

IF you ever get an opportunity , give one a 'grasp' - might surprise you...

get a room.

It really is ingenious! I am so happy you started this thread and I got on the Ego One CLR train! Thank you!

Your Digi is gonna be SO jelly!

 

[Dieseler]

Anybody have a good list of atomizers that are compatible with CLR heads? So far I've found the following:

Joyetech eGo One (obviously)
Joyetech TRON-S
Joyetech TRON-T
Wismec Venti
Wismec Amor
Odyssey CLL
Tornado II Sub Mega
Tornado II Sub
Tornado II Mini
Tempest

Edit - noticed pico was already mentioned.

Original Pico with clr adapter - by yellow kiss - plastic type tank

Rcomen Pico-s - from fastech clone of above- plastic type tank

Glass type tank-
Genoa - by Caravela - Modder is Pedro Carvalho in Italy - not cheap- you tube video below

My Comments - its been said some european modders make quality vape products although not cheap
for just a tank but would buy if i could ever afford it , perhaps one day i splurge who knows.
Also has made a few other type tanks.

 

[gerrymi]

The largest atomizer that I have (currently) is 22mm...but...I just noticed...

Pico...can accommodate atomizers up to 23mm...

Balien...can accommodate atomizers up to 25mm...

but I think the iSticks are FAR MORE superior... - IMO

jus sayin' I won't buy anymore, but I might buy another 4 TC60w

The TC60W may be "disappearing"...will be keeping an eye out for Clearance Sales...

Vapecrawler


..

 

[Katya]

Frannie, I bet you would like the iStick TC60w - it's my most favorite mod (the Best !)

Too big.

and don't overlook the CoolFire IV 18650 , comfy and stylish also...

*sigh*

I like mine, but no more internal batteries for me. At least for now. Depending on what happens with the deeming regs, taxes, etc.

 

[Katya]

simply YES
but going a bit deeper:

• the CLR Ti .5 has a gold plated larger 3.5mm air hole
• the CLR Kanthal .5 has a silver plated 3.5mm air hole
• the CLR Kanthal 1.0 has a silver plated 1.8mm air hole

Is that gold-plated pin any better than the others? Just curious.

 

[Shawn Hoefer]

Too big. [emoji38]



*sigh*

I like mine, but no more internal batteries for me. At least for now. Depending on what happens with the deeming regs, taxes, etc.

The mod mentioned is not an internal battery mod...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Shawn Hoefer]

Is that gold-plated pin any better than the others? Just curious.

Slightly better conductivity and corrosion resistance...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[ChelsB]

Slightly better conductivity and corrosion resistance...

Sent from my SAMSUNG-SM-N910A using Tapatalk

So it's worth the extra dollar or so?


Sent from my iPhone using Tapatalk

 

[Shawn Hoefer]

So it's worth the extra dollar or so?


Sent from my iPhone using Tapatalk

Nah... only slightly better... still, if it's only a buck...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Katya]

The mod mentioned is not an internal battery mod...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Katya]

Slightly better conductivity and corrosion resistance...

Sent from my SAMSUNG-SM-N910A using Tapatalk

Have you tried those Ti coils in TC mode? How do they perform? Any good?

 

[pufZeppelin]

Too big.
*sigh* I like mine, but no more internal batteries for me. At least for now. Depending on what happens with the deeming regs, taxes, etc.

Is that gold-plated pin any better than the others? Just curious.

So it's worth the extra dollar or so?

- the TC60w is the same height as the CF IV 18650
- the CFIV18650 has take out battery
- gold plated - makes better connection, stays cleaner, just makes ya feel better about yourself
- who-what-where pays more for gold ? // "CLR" are all the same price as far as I've ever seen

NICE JOB by ♪"broom-man"♪ (Shawn) answering lots of good questions...

​