eGo ONE tank series – CLR coil

[440BB]

Yeah doesn't take long fer this gang to clean out a clearance bin!

Same here. I've got enuf EOs. Could use a couple more Picos and STMs. Outside those 2 items there's nothin gonna pry another buck outta my vape fund. I've finally reached "reap the rewards" mode!

I thought my stockpile was done except for the occasional fun purchase. Then the HC clearance of Ego One kits and bits showed up and I decided to learn about these little devils. All of the information and enablers here were too much to ignore!

About $90 later I'm preparing a new wing of the vape hoard cave with 13 tanks, 10 batteries, 20 clr heads, plus a few oring packs for my STMs. Lots of 19mm goodness to fit on my ProVaris, a bit of 22mm action and a 16mm topper just in case. I expect the CL heads will be mostly used for insulator scavenging and I'll be winding up 1.5+ ohm coils for the CLR's. MTL bliss is in the forecast with the smaller pin.

The first package is out for delivery right now!

Thanks everybody! (I think?) And yes, I read all 300+ pages to catch up!

 

[aikanae1]

Never fear. The next deal will be showing up ...

Sent from my LGLS992 using Tapatalk

 

[DPLongo22]

Thanks everybody! (I think?) And yes, I read all 300+ pages to catch up!

HOLICANNOLI!!!

Never fear. The next deal will be showing up ...

Death, taxes, and something-new-from-China.

 

[gerrymi]

Now a days i just pull used cotton pulse the coil to clean and replace with new organic cotton.Once in while i may bring out the coilmaster winding jig to stay sharp and if bored .

Trying to overcome my stupidity and laziness...I'm almost ready to try this...but one question...

How much rayon do I cram into the (pulsed) coil???

..

 

[David Wolf]

While going through my boxes of GS tanks to ship to a fellow ECF member I discovered a new in the box istick 30W I had forgotten about it was like Christmas I love those small hand fitting mods when I put a silicone sleeve on them I have two in rotation with a TC40W and they've done a fine job for two years now.

 

[OcalaFlGuy]

How much rayon do I cram into the (pulsed) coil???

..

The one thing about Rayon I like the most. The correct amount is As Much as you can twist and cram in there.

While going through my boxes of GS tanks to ship to a fellow ECF member I discovered a new in the box istick 30W I had forgotten about it was like Christmas I love those small hand fitting mods when I put a silicone sleeve on them I have two in rotation with a TC40W and they've done a fine job for two years now.

I know that other guy! He is also using a 2+ yr old iS 30 and a 1 year old iS 40 TC. He also has a NIB iS 30 for when one of the daily users dies.

Bruce in Ocala, Fl

 

[Sugar_and_Spice]

The clr coils are so easy and actually require very short tails on them. If you encounter a shortage of airflow after wicking one, just shorten the part where the cotton sticks out on both sides. Works like a charm.

 

[Sugar_and_Spice]

Trying to overcome my stupidity and laziness...I'm almost ready to try this...but one question...

How much rayon do I cram into the (pulsed) coil???

..

A tight fit but not so much you distort the coil.

 

[Sugar_and_Spice]

I thought my stockpile was done except for the occasional fun purchase. Then the HC clearance of Ego One kits and bits showed up and I decided to learn about these little devils. All of the information and enablers here were too much to ignore!

About $90 later I'm preparing a new wing of the vape hoard cave with 13 tanks, 10 batteries, 20 clr heads, plus a few oring packs for my STMs. Lots of 19mm goodness to fit on my ProVaris, a bit of 22mm action and a 16mm topper just in case. I expect the CL heads will be mostly used for insulator scavenging and I'll be winding up 1.5+ ohm coils for the CLR's. MTL bliss is in the forecast with the smaller pin.

The first package is out for delivery right now!

Thanks everybody! (I think?) And yes, I read all 300+ pages to catch up!

I think you are gonna luv them. Please update on your thoughts/experiences with these new gems.

 

[440BB]

Waitin' for my vapemail like it's 2013!

 

[Katdarling]

Thanks everybody! (I think?) And yes, I read all 300+ pages to catch up!

ahahhahahahaahahaaaaaaaa!!!!!! MERITS!!!!!!!!!!

Trying to overcome my stupidity and laziness...I'm almost ready to try this...but one question...

How much rayon do I cram into the (pulsed) coil???

..

I'm pretty sure you're covered with answers now, and I'll agree. Rayone shrinketh, so as much as you can.

While going through my boxes of GS tanks to ship to a fellow ECF member I discovered a new in the box istick 30W I had forgotten about it was like Christmas I love those small hand fitting mods when I put a silicone sleeve on them I have two in rotation with a TC40W and they've done a fine job for two years now.

I love my silly little iStickie 30! That's one mod (internal batt) I'd buy again. Gerry, please find me a really good sale?

The clr coils are so easy and actually require very short tails on them. If you encounter a shortage of airflow after wicking one, just shorten the part where the cotton sticks out on both sides. Works like a charm.

Bunny tails!!!!!!!

 

[DPLongo22]

While going through my boxes of GS tanks to ship to a fellow ECF member I discovered a new in the box istick 30W I had forgotten about it was like Christmas I love those small hand fitting mods when I put a silicone sleeve on them I have two in rotation with a TC40W and they've done a fine job for two years now.

Kitty's favorite!

The clr coils are so easy and actually require very short tails on them. If you encounter a shortage of airflow after wicking one, just shorten the part where the cotton sticks out on both sides. Works like a charm.

Love 'em, love 'em, LOVE 'em.

Did I mention that I love 'em?

A tight fit but not so much you distort the coil.

Mine are all SO distorted, yet every single one reads 1.05-1.10. I'm going to keep pushing them until they pop.

Waitin' for my vapemail like it's 2013!

&

I love my silly little iStickie 30! That's one mod (internal batt) I'd buy again. Gerry, please find me a really good sale?

Told ya!

Bunny tails!!!!!!!

 

[Foggy Road]

Wow, just realized that in about 5 weeks I'll have been Vaping for 2 years. AND haven't bought a throwaway coil since my first month!


Edit: Whoops I lied. I did buy some for my fling with the iCare. But they were so lousy I eventually started rebuilding them before I used 'em.

 

[David Wolf]

The one thing about Rayon I like the most. The correct amount is As Much as you can twist and cram in there.



I know that other guy! He is also using a 2+ yr old iS 30 and a 1 year old iS 40 TC. He also has a NIB iS 30 for when one of the daily users dies.

Bruce in Ocala, Fl

Woah look at all the istick 30 fans here! Such a simple reliable mod. And what a coincidence Bruce, that ECF member getting my GS tanks and sending me a KF V3 clone lives in Ocala FL too!

 

[Katdarling]

 

[DPLongo22]

Wow, just realized that in about 5 weeks I'll have been Vaping for 2 years.

NICE!!!!!!

 

[Dieseler]

No shoves, and no buts. Back behind DPL and I, k?

[/QUOTE]
Thinking this may not be made in nano size as i just saw the dimensions of it .
It a little smaller than the regular size HcigarVT 75 and a little bigger than the Hcigar VT 75 Nano.
Made of zinc and aluminum with a stainless steel 510 connector and the reliable American Dna board.

 

[DPLongo22]

No shoves, and no buts. Back behind DPL and I, k?

Thinking this may not be made in nano size as i just saw the dimensions of it .
It a little smaller than the regular size HcigarVT 75 and a little bigger than the Hcigar VT 75 Nano.
Made of zinc and aluminum with a stainless steel 510 connector and the reliable American Dna board.

We were JUST talking about this, D - TONIGHT!!! I'm not kidding.

We're going to wait for the Nano, almost for sure.

Almost... (ruh-roh).

 

[motordude]

Got my evic vtc mini today!
I like it. It will be a good replacement for my VV3's.
Got the cyan color with the v1 tank.
It's purdy.

 

[DPLongo22]

Got my evic vtc mini today!
I like it. It will be a good replacement for my VV3's.
Got the cyan color with the v1 tank.
It's purdy.

POIDH! ;-)