Not sure. To the best of my knowledge, no one has managed to wear one out. Easy to rebuild, easy to re-wick.
eGo ONE tank series – CLR coil
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
Just a heads up, in case you're not aware, the CLRs are optional and have to be ordered separately. The ones included in kits are standard CL coils.
When you order coils, be careful to get CLR and not CL if you plan to rebuild them. You'll be able to choose either 1.0Ω or .5Ω. Most seem to prefer the 1.0, but some lean to the .5. You can get five of them for $8.95 if you scroll down on the link provided above.
I saw that! Thanks.
Does FT sell the coils?
Does FT sell the coils?
I just stuck some in my cart!
Can't really say how long the clrs last but they are fairly sturdy. If you could find the silicon post insulator replacements somewhere. They would last like forever as that is the only part that will wear out. I have while testing different ohms and wire material rebuilt one of the coils probably 40 times or more. It is still good for more builds. If you rewick it and dry burn it one coil will last months before you have to wrap another coil.
I have 6 boxes of the Titanium clr coils that I bought when the one site was selling them for $2.50 a 5 pack. You can only use the pre-built titanium in temp control but you can rebuild with whatever wire you like. The titanium coils are good coils but the center air hole is larger than the 1 ohm coils. I also bought 2 packs of the 1 ohm coils.
I have I think settled on what I like at this point on rebuilding them. Kanthal 26 awg with 2.5mm core at 1 ohm. Good flavor and good amount of vapor with decent battery life running at 18 watt
Stainless steel has a slightly cleaner taste than kanthal but not enough to matter for me. Easy to build a longer lasting kanthal coil at 1 ohm. If you are going for lower ohm coils SS probably better.
I have 6 boxes of the Titanium clr coils that I bought when the one site was selling them for $2.50 a 5 pack. You can only use the pre-built titanium in temp control but you can rebuild with whatever wire you like. The titanium coils are good coils but the center air hole is larger than the 1 ohm coils. I also bought 2 packs of the 1 ohm coils.
I have I think settled on what I like at this point on rebuilding them. Kanthal 26 awg with 2.5mm core at 1 ohm. Good flavor and good amount of vapor with decent battery life running at 18 watt
Stainless steel has a slightly cleaner taste than kanthal but not enough to matter for me. Easy to build a longer lasting kanthal coil at 1 ohm. If you are going for lower ohm coils SS probably better.
The main difference for me is that the .5 has bigger airflow for DTL. I buy the .5s and then rebuild them to 1.5. That's the wonder of the CLRs, you make them match almost any vape you want, barring the extremes in either direction.
joyetech evic vtc mini 60w full kit with temperature control
This is a good kit with the tank. $20 plus shipping. Upgrades to 75w with the new firmware
Really is a sweet little kit! Got the white one, so purty I'm ascaret ta touch it. Tested it and packed it in my stash, have too much other stuff for everyday beater mods. And believe me, my mods work fer their livin and take a beatin.
I got 2 from them when they still did free shipping on clearance items with $29 minimum. Stashed one and use the other. Nice.
This is what I want
joyetech ego one vt full kit
joyetech ego one vt full kit
I got several of those from them. It works very well with all the coils I threw at it between .5 ohm and 1.4 ohm. No fiddling with anything, just filler up and vape.
If you snatch up a pile of those Mega V2 tanks @ $2 each this a good mod at a good price. BUT it doesn't do SS in TC mode just Ni and Ti. Not upgradeable. If any of that matters. Also has different color faceplates available on FT cheap if Ya wanna get matchy matchy with yer tanks.
Eleaf iStick 60W TC Box Mod Battery - $13.99
A bunch!
Wait....Mega V2 tanks for $2? Where they be?
- Status
Similar threads
- Locked
