EHPro Kayfun Lite Plus and Provari Tank Ring

[SoonerChris]

Anyone with both of the above have issues with the KFL+ not screwing all the way down thus leaving the ring loose?

You can see the gap in the pic below.

 

[jd1978]

I have an authentic kfl plus v2 and with mine, I can adjust the pin, to make a closer fit, but you wouldn't want it really tight fitting or you may scratch your ProVari.

 

[SoonerChris]

I have an authentic kfl plus v2 and with mine, I can adjust the pin, to make a closer fit, but you wouldn't want it really tight fitting or you may scratch your ProVari.

Wonder if this pin is adjustable? If does have what looks like a regular screwdriver notch.

 

[jd1978]

Give it a try, bit be careful, while adjusting mine before, I have moved the block on the deck and had to go back in and straighten it back out.

Sent from my SAMSUNG-SGH-I577 using Tapatalk

 

[jd1978]

Here's mine, I'm using, I think the same ring you ate in this pic.

Sent from my SAMSUNG-SGH-I577 using Tapatalk

 

[jd1978]

Are^

Sent from my SAMSUNG-SGH-I577 using Tapatalk

 

[SoonerChris]

Give it a try, bit be careful, while adjusting mine before, I have moved the block on the deck and had to go back in and straighten it back out.

Sent from my SAMSUNG-SGH-I577 using Tapatalk

Tried it. Not gonna help. Either am going to have to put double sided tape under the ring or find a ring that's a little bit taller. I posted in the Provape area as well for suggestions.

Weird think is my Aerotank seems to be fine with ring. Holds the ring in place just fine.

 

[jd1978]

Maybe find the right sized rubber band and put on the inside of the ring. Maybe.

Sent from my SAMSUNG-SGH-I577 using Tapatalk

 

[horton]

My ring is loose as well. Can't adjust the screw on the atty, so have to find a way to cobble things up. But at least I can use the ring with other attys....

 

[SoonerChris]

Anyone try this? Looks like it will work.

How to shorten the Kayfun Lite centre pin

 

[horton]

Anyone try this? Looks like it will work.

How to shorten the Kayfun Lite centre pin

That's a good idea. Mine is not that far off to worry about making that "collar" too thin. Thanks for the idea......

 

[SoonerChris]

Issue resolved. Pulled the center pin and filed it down with a metal file. Fit like a charm now.

Sent from my iPhone