Ehpro Kayfun Lite Plus V2 questions

[deryk]

Question for you folks...I just got my Ehpro kayfun Lite Plus V2 on thursday, just got home from camping and I had a little leakage issues...seems to be coming from the 2 holes on the sides (I guess they are air breather holes...I can see lightright through them when I hold them up) are they supposed to let light through? And there is 3 screw holes on the bottom, 1 to fill it one is supposed to be an air adjustment, what about the other one?

thanks
deryk

 

[heyilikethis]

are you positive that it is a lite plus v2, i have one as well(ehpro) and it only has one hole on the side for air intake, and on the bottom it has a fill screw and airflow adjustment screw, and of course the 510 pin that makes contact with the mod, that being said i know theres an improved version they released, not sure of the specifics of it but i know it has added airflow or sumthing along those lines, maybe thats it, if its leaking tho that typically means the coil and wick or too close to the center hole on the deck, thus letting e-liquid to pull and leak down the 510 post and out any holes can be allieviated by simply raising your coil a bit higher, ive heard to leave it almost touching the center post but my experience has been that it works better when raised almost past the height of the screws, it can also mean there is not enough wick in the coil and the eliquid is flooding the chamber rather than being absorbed by the wick, hope that helped gonna go do a search now and try to find what version of kayfun u have

 

[heyilikethis]

forgot to say too, if you are traveling through different elevations, the change in air pressure can cause slight leakage, theres a thread about it somewhere on here

 

[heyilikethis]

ok so i think i found which version u have, Kayfun Lite Plus v2 Clone (Dual Airflow) by EHPRO - Eciggity is that it? it has dual airflow which would explain the multiple screws on the bottom, it should have a fill port and TWO airflow adjustment screws on the bottom of the base

 

[Saltraker]

Yes, the EHPRO KLP V2 has two small screws on the bottom to adjust airflow. Personally, I haven't found the two air intakes vs. one to be worth the extra bucks. Can't really tell the difference between the V1 and V2, as far as airflow goes. YMMV.

 

[Despraci]

Yes you have the dual air flow version and if lined up just right you will have light pass through the base. If you are getting leakage from the air holes, then more then likely you have a bad o-ring or you have a vacuum leak... Possibly from cross threaded plastic sections of the tank.

 

[Keeferes]

The V2 does NOT have dual airflow. The V2.5 does, and the V3 hitting soon will also. I really wish the vendors would start labeling these things correctly to help folks avoid these issues when troubleshooting.

 

[deryk]

Here is a link to the ebay auction and a photo of the base of mine...it does have the twin holes ] Kayfun Lite Plus V2 by Ehpro Brushed Stainless Steel Rebuildable Atomizer Tank | eBay Now I was up in the mountain in Northern Pa camping over the weekend so maybe it was that... I filled in thursday and carried it around with no leaks that I noticed...I made the coil so the bottom of the coil was at the height of the 2 screws like in a video I saw.



"Any idea what the screws on the bottom are for?" figured it out...1 for each vent hole to tighten up the draw.

 

[dhaiken]

The 2 small screws are dual air flow adjustment. The larger screw is the fill port.
The elevation change can indeed cause leaking.
On the rare occasion I have had a KFL leak, I unscrew the top and screw it back down. Barely snug it up and then turn it upside down and finish tightening it. I also blow compressed air through the air intake on the side to eliminate excess juice. You can do it manually with your mouth as well, but I have found compressed air works better.
It has always worked like a new successful fill for me.

Here is a link to the ebay auction and a photo of the base of mine...it does have the twin holes View attachment 363835 ] Kayfun Lite Plus V2 by Ehpro Brushed Stainless Steel Rebuildable Atomizer Tank | eBay Now I was up in the mountain in Northern Pa camping over the weekend so maybe it was that... I filled in thursday and carried it around with no leaks that I noticed...I made the coil so the bottom of the coil was at the height of the 2 screws like in a video I saw. Any idea what the screws on the bottom are for?

 

[Despraci]

The V2 does NOT have dual airflow. The V2.5 does, and the V3 hitting soon will also. I really wish the vendors would start labeling these things correctly to help folks avoid these issues when troubleshooting.

Actually when I spoke to Ehpro directly, they still consider these v2 since they are no longer making the single air flow version and the was no other change other then the additional air hole. All other parts are identical between the V2 single air hole and dual air hole.

 

[deryk]

and should some vapour come out the breather holes?

 

[AzPlumber]

The V2 does NOT have dual airflow. The V2.5 does, and the V3 hitting soon will also. I really wish the vendors would start labeling these things correctly to help folks avoid these issues when troubleshooting.

Where did you see the V2.5's at? I can only find V2's, even on Ehpro's website.

 

[Keeferes]

Ehpro was where I saw the v2.5. Since discontinuing production of the single airflow hole design, perhaps they started calling these one v2's. Tobeco was where I saw info about the upcoming v3. I will look again tomorrow and get some links for the info I was going from

 

[Keeferes]

I apologize. I was wrong in what I posted earlier. I was confusing another product with this. Also the tobeco v3 I mentioned was another brain fart. It was actually a misprint on a 3.1 from alibaba.

 

[Despraci]

I apologize. I was wrong in what I posted earlier. I was confusing another product with this. Also the tobeco v3 I mentioned was another brain fart. It was actually a misprint on a 3.1 from alibaba.

Everyone makes mistakes and Alibaba can be really misleading sometimes because resellers call a product whatever they like sometimes.