Eleaf GS Air Fan

[Cheechako]

I almost wish these coils didn't last so long

If I want to expand my rebuilding stock, I have to tear a new one apart.
Hate the wicks in the new ones and want rayon!
Any other tank and folks would be going through these by the fist full and I could trade with them.
Feels almost sinful to break down a new coil...I know, first world problem!
If anyone accumulates a lot of used coils and they don't recoil and want to trade out, PM me!

 

[GranFumador]

Hey Cheech,
Remember, about five weeks ago, I said I'd send you coils once I had a small collection? Well, since then I've had two—count 'em—die. Be patient. The current three in use can't last forever. Even buffalos get tired eventually.

 

[Cheechako]

Hey Cheech,
Remember, about five weeks ago, I said I'd send you coils once I had a small collection? Well, since then I've had two—count 'em—die. Be patient. The current three in use can't last forever. Even buffalos get tired eventually.

It is a standing offer for you my friend! Whether it's two or a hundred...
(Two coils, sheesh, I go through that in two days)

 

[Bikenstein]

It is a standing offer for you my friend! Whether it's two or a hundred...
(Two coils, sheesh, I go through that in two days)

I know you ordered some in the c00p but 100? Sheesh Cheech! That's hard to say Sheesh Cheese, Shes Cheech........ I laugh at nothing

 

[Cheechako]

I know you ordered some in the c00p but 100? Sheesh Cheech! That's hard to say Sheesh Cheese, Shes Cheech........ I laugh at nothing

Sometimes you really scare me.

Did you and Inspects ever finish your shenanigans?

 

[Bikenstein]

Sometimes you really scare me.

Did you and Inspects ever finish your shenanigans?

Lol. I keep checkin that thread but he ain't done it yet. I might put my VaporShark on there with a GSA. My pics from my wife's camera don't upload easy. Try sayin Sheesh Cheech five times in a row

 

[Cheechako]

Lol. I keep checkin that thread but he ain't done it yet. I might put my VaporShark on there with a GSA. My pics from my wife's camera don't upload easy.

There was a bit of a misunderstanding in the one thread. I thought, "Those cheeky monkeys are planning a troll bait!"
Hence: stirring the pot!

Really stirring the pot!

 

[LynnNC]

Lol. I keep checkin that thread but he ain't done it yet. I might put my VaporShark on there with a GSA. My pics from my wife's camera don't upload easy. Try sayin Sheesh Cheech five times in a row

Uh-oh....wonder if I know what thread you're talking about?? Lol

Cheech, I wish you'd figure out how to recoil the BDC coils. I use those in the GS16S without the air base. Those seem to give out faster than the air coils and I can't get them apart to see what's on the inside.

 

[Cheechako]

Uh-oh....wonder if I know what thread you're talking about?? Lol

Cheech, I wish you'd figure out how to recoil the BDC coils. I use those in the GS16S without the air base. Those seem to give out faster than the air coils and I can't get them apart to see what's on the inside.

The Recoiling Queen asking me?!?!? Is this a test?


Do you mean recoiling the GS Air coils back into dual coils? Nope, even my bony fingers can't do that.
Or do you mean the coils that have to be pushed into the bottom, the GS Air16?

 

[LynnNC]

The Recoiling Queen asking me?!?!? Is this a test?


Do you mean recoiling the GS Air coils back into dual coils? Nope, even my bony fingers can't do that.
Or do you mean the coils that have to be pushed into the bottom, the GS Air16?

Yes...the coils that have to be pushed in...the GS Air 16's. The Air coils are great with just one coil...don't need 2!

 

[inspects]

Uh-oh....wonder if I know what thread you're talking about?? Lol

Cheech, I wish you'd figure out how to recoil the BDC coils. I use those in the GS16S without the air base. Those seem to give out faster than the air coils and I can't get them apart to see what's on the inside.

Lynn, I was going to post my Tuttle Puffer Eleaf M on the SX Mini M.....ask why the TP is not working at 40 watts in another thread, but I didn't want to get anyone wadded up on a nice lovely Saturday..........

----------------------------

 

[Cheechako]

Yes...the coils that have to be pushed in...the GS Air 16's. The Air coils are great with just one coil...don't need 2!

Took awhile, had to hunt down a pic and make notes:

It comes apart where the seam is indicated on the pic just like the GS Air coil.
The wire can be seen on the bottom, so the grommet comes out like the Air coil.
Looks like a liner between the cap and coil just like the Air.
I have not actually taken one apart, and I didn't even stay at a Holiday Inn last night.
But, it looks to be the same rebuild as a Air coil...was that any help?

 

[Kivrin]

Lynn, I was going to post my Tuttle Puffer Eleaf M on the SX Mini M.....ask why the TP is not working at 40 watts in another thread, but I didn't want to get anyone wadded up on a nice lovely Saturday..........

----------------------------

I took a peek at that thread. Srs bsns in there!

I am happy that I removed my air-flow adjuster screws One did try to fly away, but I found it!

 

[LynnNC]

Lynn, I was going to post my Tuttle Puffer Eleaf M on the SX Mini M.....ask why the TP is not working at 40 watts in another thread, but I didn't want to get anyone wadded up on a nice lovely Saturday..........

----------------------------

You rock Dale!!! Give em hell!!

 

[Cheechako]

I took a peek at that thread. Srs bsns in there!

I am happy that I removed my air-flow adjuster screws One did try to fly away, but I found it!

Some of the threads are a little pompous...they have their knives out in a hurry!

I found I liked my Air without the screw, well...actually, took it out and dropped it. It has taken up residency in the carpeting.
When I dropped the second one, I said the hell with it and went air "commando."

 

[Cheechako]

You rock Dale!!! Give em hell!!

Good heavens Lynn! First you like a paddling and now encourage revolution!
You are a wild women!

 

[LynnNC]

Took awhile, had to hunt down a pic and make notes:
View attachment 427404
It comes apart where the seam is indicated on the pic just like the GS Air coil.
The wire can be seen on the bottom, so the grommet comes out like the Air coil.
Looks like a liner between the cap and coil just like the Air.
I have not actually taken one apart, and I didn't even stay at a Holiday Inn last night.
But, it looks to be the same rebuild as a Air coil...was that any help?

NO!!!! I can't get the #%#%#%#€£¥ things apart!!! I've broken off 2 chimneys trying. These coils go south fast!!

 

[Cheechako]

NO!!!! I can't get the #%#%#%#€£¥ things apart!!! I've broken off 2 chimneys trying. These coils go south fast!!

Without taking my magic hammer, the big one, to it I'm no help at all.
I would try to pry, just like the Air, at the top of the cap, but below the chimney.

 

[LynnNC]

Without taking my magic hammer, the big one, to it I'm no help at all.
I would try to pry, just like the Air, at the top of the cap, but below the chimney.

I'm going to try using vice grips on one end and pliers on the other to see if that works. Those little bad boys are on to stay!

 

[LynnNC]

Oh...and Cheech, I love a good thread derailment!!!