Eleaf GS Air Fan

[aikanae1]

~ Hey Katdarling: Thanks! I don't want to be stepping on any toes or doing anything improper! Yeah, I have a Thang for Verdana???? It makes my Little Monkey Boy look more like me!

The folks I've been talking with say the M is available now! MS or Short Version is not at this time but they are checking. I'm also looking at the Melo, Lemo II, Lemo Drop and coils. Even some istick 50's. Trying to get the Best Prices. If we need to go proper route I'm Fine with that but I want to get the deal as soon as I can even if I take it on myself. I don't know how that works going the proper route??? I'm not looking to make anything just want to get on the deal while I can. They are getting back to me see what they say. {:{}

You need to open a planning thread in "that" area. Go there and we'll discuss it.
See ya in the dark side.

Looks like the GS M was 19mm and I'm waiting for the 22mm version (MS?) that was replacing the IJust tank.

 

[Skullman]

~ Yep, Gotcha! My Mistake Thinking Out Loud! {:{}

Ahem.... Just another friendly reminder...

 

[rocketman29]

Please don't move too quickly on this "thing" as I am interested in participating and should be a verified member Sunday night.

 

[LynnNC]

It's a good time to be a vaper! Choices, choices and more choices!
Capitalism at it's finest...
Yes LynnNC, I am thrilled with my Air too and now with rebuilding the coils, I have an endless supply and am
ready for the Zombie hordes to come over the hill.

Cheech, I was just wondering what the deal was with the M tanks.... And yep! I'm happy with the Airs and if I want a bigger tank to sit on my 50W, I have a Kanger ST Mini that I put on it. I don't sub ohm so I built the rba at 1.2 ohms and rebuilt the .5 ohm coil that came with it to 1.2 as well. I'm good!! Im happy!

 

[Cheechako]

Cheech, I was just wondering what the deal was with the M tanks.... And yep! I'm happy with the Airs and if I want a bigger tank to sit on my 50W, I have a Kanger ST Mini that I put on it. I don't sub ohm so I built the rba at 1.2 ohms and rebuilt the .5 ohm coil that came with it to 1.2 as well. I'm good!! Im happy!

Gosh, you got a lot of choices and You're a rebuilding genius!
I tried my Russian 91 again the other night and went right back to my Air...now I'm spoiled...rotten.

 

[LostVapeMonster]

Well thanks to the kindness of a very generous person who frequents this thread, I now have almost everything I need to try a rebuild. I think all I need now is some of that rayon. Where in the world do you think I might come up with some of that stuff...?

 

[mudram99]

Well thanks to the kindness of a very generous person who frequents this thread, I now have almost everything I need to try a rebuild. I think all I need now is some of that rayon. Where in the world do you think I might come up with some of that stuff...?

The white fluffy stuff is rayon Sorry but I just ran in and gotta run back out. Will bring up to speed a little later

 

[Katdarling]

~ Yep, Gotcha! My Mistake Thinking Out Loud! {:{}

Understood.

 

[LynnNC]

Gosh, you got a lot of choices and You're a rebuilding genius!
I tried my Russian 91 again the other night and went right back to my Air...now I'm spoiled...rotten.

No I'm not! Trust me although I have had some very good teachers who take very good pictures! Lol Right now I'm struggling with a Lemo Drop. The coil is built and it's almost perfect but the wicking? Ay yi yi....it will be the death of me!! Lol

 

[Katya]

Well thanks to the kindness of a very generous person who frequents this thread, I now have almost everything I need to try a rebuild. I think all I need now is some of that rayon. Where in the world do you think I might come up with some of that stuff...?

You can also get a small sample from Sweet Vapes--I got mine there:

Cellucotton Rayon Wick 1ft - Wick Wire Mesh - Atomizers RBA’s

 

[Katya]

No I'm not! Trust me although I have had some very good teachers who take very good pictures! Lol Right now I'm struggling with a Lemo Drop. The coil is built and it's almost perfect but the wicking? Ay yi yi....it will be the death of me!! Lol

.............

Wick it heavy with the tails just brushing the deck and away from the juice channels. Works every time.

 

[LynnNC]

Well thanks to the kindness of a very generous person who frequents this thread, I now have almost everything I need to try a rebuild. I think all I need now is some of that rayon. Where in the world do you think I might come up with some of that stuff...?

You can buy rayon at Sally's Beauty Supply. But...it's 500ft of rayon. It's called Graham's Cellucotton. If you decide to pick up a box make sure it says rayon and not 100% cotton like I did.

 

[LynnNC]

Thanks Katya!! I'll give it a shot! Another tip from somewhere else is to take a little of the rayon to create a bridge around the deck to connect the wicks. All the way around.

 

[Oregon Linda]

You can buy rayon at Sally's Beauty Supply. But...it's 500ft of rayon. It's called Graham's Cellucotton. If you decide to pick up a box make sure it says rayon and not 100% cotton like I did.

If you don't want to buy that much (and that much should last you 2 lifetimes ) I bought 15 feet from a seller on eBay for about $4.50 and free shipping.

 

[LynnNC]

If you don't want to buy that much (and that much should last you 2 lifetimes ) I bought 15 feet from a seller on eBay for about $4.50 and free shipping.

Oooohhh....I'll have to check that out!! Thanks for the tip!!

 

[Katya]

Thanks Katya!! I'll give it a shot! Another tip from somewhere else is to take a little of the rayon to create a bridge around the deck to connect the wicks. All the way around.

Yeah--there are plenty of good tips in that thread... But the bottom line with Lemos is more wick through the coil, less on the deck. Some people cut the ends at 45 degree angle to create a "broom effect." You want your wicks just sweeping the deck and away from juice channels. Large coil diameter--2-2.5 mm at least.

Elyptic has it right B2T, a leaking chimney seal or leaking upper tank seal will NOT cause dryhits; they will cause flooding. He's also right about checking your juice channels. Below are pics of how I wick my Lemo.

View attachment 415155

Wick tails cut at 45° angle so they sit flat on the juice well. Chunky wick!

View attachment 415157

Juiced and placed in position.

View attachment 415159

Chimney installed and wick moved away from channels.


Vaping this very build and wick at 25w with no dryhits from a full tank to the last drop.

 

[Bikenstein]

If you don't want to buy that much (and that much should last you 2 lifetimes ) I bought 15 feet from a seller on eBay for about $4.50 and free shipping.

And save your money for Tampons de Gaze..

 

[Cheechako]

And save your money for Tampons de Gaze..

I see your French is improving

 

[Cheechako]

You can buy rayon at Sally's Beauty Supply. But...it's 500ft of rayon. It's called Graham's Cellucotton. If you decide to pick up a box make sure it says rayon and not 100% cotton like I did.

You can always decorate the Christmas tree with it...

 

[LynnNC]

You can always decorate the Christmas tree with it...

I give to my grandson to play with! Lol He has fun stuffing it into his toys or pretending he has a mustache like his daddy.