Absolutely!!!! They will be going in a little baggie to await a rebuild. I may take u up on that offer since Ive only been successful at rebuilding protank coils thus far!!
Eleaf GS Air Fan
- Thread starter Javamon
- Start date
- th_trl_thread_readers 0
- Status
YAY! I forgot, too!!Thank you for asking! You are so sweet!
YES! In my euphoria I forgot to mention it!
Ordered two and some other junk...
Absolutely!!!! They will be going in a little baggie to await a rebuild. I may take u up on that offer since Ive only been successful at rebuilding protank coils thus far!!
Will be more than happy to!
Oh jeez! where's my manners
let me try and redeem my wretched self...Hey Nanny, did you get your order in?
Absolutely!!!! They will be going in a little baggie to await a rebuild. I may take u up on that offer since Ive only been successful at rebuilding protank coils thus far!!
Rachel, these are really similar to rebuilding protank coils. About the only difference is that cap around the coil and Cheech's magic gauze that wraps around it. It's a little tricky getting the gauze right, but the cap is really pretty easy to get off. I don't think you'll have any big problem with it.
Yes, we did! We ordered modestly -- just TWO. And got shipping notice within an hour or two. I'm excited to have a little more liquid capacity, hoping the rest is similar. Glad you got an order in and that they worked out the shipping pricing error.Oh jeez! where's my manners
Hey Nanny, did you get your order in?
I'm wondering how the MS can have the exact same capacity as the M (4 ml), and yet be a lot shorter? It doesn't look wider.
Elementary, My Dear Linda. Equal parts of Air, black licorice, and a sprinkling of metaphysics. Shake well and let cool before serving.
Note also the probability of a typo.
Joey, I'm guessin that you have little experience with coils. I highly recommend you read up on building them and watch some videos. If you want to use thicker wire, 28g is easy to work with. The lower the number the less resistance of the wire and the more wraps you'll have to make to get the same resistance. You can have major problems, especially with non regulated mech mods. You can damage your mod or even yourself. Not sayin that's gonna happen, just advising you to be safe.Ok so than these have to be 32g and to much of a pain so will look around for 24g. Thanks Cheech
The bad hits you got with the original coil was probably more the wick material than anything
Last edited:
That's what I'm waiting for!!! The shorty version!!
I got my order of Gs-air style from Fasttech...Well If your thinking of getting these do not bother, they are not worth the small difference in price to the authentic..
I also ordered an authentic but have not got it yet... so that is still to come..
I already had 2 GS-Airs from Cvapor and they work well.
The ones I got from Fasttech need a lot of work before you can vape them..
The center positive pin needs to be ground down it sticks out over 2mm..
The air control screw had to be worked to move in and out freely... and each 1 of the 3 I got has a different length air screw!
The air channels need to be filed smooth and then the metal shavings cleaned out..
The whole atty needs through cleaning for machine oil and metal shavings..
The best part for last.. only the drip tip that came with it fits....I tried several no luck..
The really sad part is all three came in a genuine looking Eleaf box complete with instruction sheet that looks the same as the original I got..
That means some people could get this and think it is an original.. real sad.. because an original works so well..
I gave it a bad review... here is a link for reference..
https://www.fasttech.com/products/2078202
BTW when I finish all that work.. I will post how it vapes.. but don't hold your breath... I still have a life..
I also ordered an authentic but have not got it yet... so that is still to come..
I already had 2 GS-Airs from Cvapor and they work well.
The ones I got from Fasttech need a lot of work before you can vape them..
The center positive pin needs to be ground down it sticks out over 2mm..
The air control screw had to be worked to move in and out freely... and each 1 of the 3 I got has a different length air screw!
The air channels need to be filed smooth and then the metal shavings cleaned out..
The whole atty needs through cleaning for machine oil and metal shavings..
The best part for last.. only the drip tip that came with it fits....I tried several no luck..
The really sad part is all three came in a genuine looking Eleaf box complete with instruction sheet that looks the same as the original I got..
That means some people could get this and think it is an original.. real sad.. because an original works so well..
I gave it a bad review... here is a link for reference..
https://www.fasttech.com/products/2078202
BTW when I finish all that work.. I will post how it vapes.. but don't hold your breath... I still have a life..
I was kinda regretting getting only one M, but not anymore. I will get an MS now too.
About the "gurgling", I believe it is not the coil flooding, but the juice getting in the chimney. I say this because I can fix it with a q-tip modified to slide down the tank's chimney.
I have only had the GS Air for about 2 weeks. The original coil "old style" worked great but when I realized I received some of the "new style" ones I quickly swapped to try them out and that's when the "gurgling" started. It's easy to clear with the modified q-tip.
Again, this is only 1 coil that I have tried. I have 2 Nauty Minis in my rotation so I don't go through coils too quickly.
About the "gurgling", I believe it is not the coil flooding, but the juice getting in the chimney. I say this because I can fix it with a q-tip modified to slide down the tank's chimney.
I have only had the GS Air for about 2 weeks. The original coil "old style" worked great but when I realized I received some of the "new style" ones I quickly swapped to try them out and that's when the "gurgling" started. It's easy to clear with the modified q-tip.
Again, this is only 1 coil that I have tried. I have 2 Nauty Minis in my rotation so I don't go through coils too quickly.
- Status
Similar threads
