Eleaf GS Air Fan

[tctt]

Thanks everyone for the ummmmmmm, warm welcome?!?! If you go back in the thread you'll see that I have chimed in a couple of times. Ding, Ding

 

[tctt]

I think maybe I need to get me one of those ultrasonic cleaners also! Maybe I can degunk my coils and won't have to rebuild them.

 

[LynnNC]

I think maybe I need to get me one of those ultrasonic cleaners also! Maybe I can degunk my coils and won't have to rebuild them.

That may be true. However, what I've found in rebuilding these from stock coils is the stock ones are dual coil so you have to be able to get the silica wicks out and be able to put the wicking back in. As of late, both coils are high enough to get to and re wick. Just a thought...

 

[LynnNC]

Thanks everyone for the ummmmmmm, warm welcome?!?! If you go back in the thread you'll see that I have chimed in a couple of times. Ding, Ding

Most of the time this thread moves so fast I don't even know I'm posting in it! Lol

 

[Toastyroadie]

Hey all, hope you're all doing well, just chiming in.

 

[Cheechako]

Hey all, hope you're all doing well, just chiming in.

Chime away my friend, chime away!

 

[Toastyroadie]

Chime away my friend, chime away!

Howdy Cheech, I have the evic VT and was wondering what gauge nickle or titanium wire you'd recommend for the airs? I also want to build a coil for my Lemo drop and Lemo 2, what gauge would you recommend on those? Thanks in advance.

 

[Cheechako]

Howdy Cheech, I have the evic VT and was wondering what gauge nickle or titanium wire you'd recommend for the airs? I also want to build a coil for my Lemo drop and Lemo 2, what gauge would you recommend on those? Thanks in advance.

I think either @Bikenstein or @LynnNC would be able to help you on those questions...
I haven't gone to the TC side yet, still stuck in the kanthal rut!
I do know Bikenstein has a lot of experience with the Lemo...

 

[JoeyC]

Hi everyone been a while since posting been lurking alot lately lol. I have been refining my coil rebuilding and diy ejuice skills. I have 10 gsa's, 6 gsa m, 1 melo, 3 lemo drops, and 1 kayfun clone, 2 kanger st plus tanks. Only tank I am having trouble with is the KF, it leaks at the bottom so I ordered an o-ring kit from fast tech. So far Im doing pretty good with my builds, I like both rayon and kgd cotton and ohms read 1.2 for gsa and .8 for the lemo drops. I am looking into getting a reo grand but will have to wait they are out of my price range right now unless I decide to lighten up my inventory of gsa tanks lol.

@ Lynn or Cheech which uc did you buy??

 

[GranFumador]

Chime away my friend, chime away!

I think that I must no more lurk,
lest Tibsie appelate me "jerk".

A jerk whose hungry mouth is prest
Against the clearo's vap'rous zest;

A lurker scans and reads all day,
and lifts hiz lazy arms to vape;

A chimer may do more than stare,
and say, "Hello! and Howdy there."

Upon arising asks in vain
for coupons, tips and rayon skein.

Yes, chime I shall without much toil
But Lynn and Cheech can make a coil.

-- with apologies to Joyce Kilmer

 

[Cheechako]

Hi everyone been a while since posting been lurking alot lately lol. I have been refining my coil rebuilding and diy ejuice skills. I have 10 gsa's, 6 gsa m, 1 melo, 3 lemo drops, and 1 kayfun clone, 2 kanger st plus tanks. Only tank I am having trouble with is the KF, it leaks at the bottom so I ordered an o-ring kit from fast tech. So far Im doing pretty good with my builds, I like both rayon and kgd cotton and ohms read 1.2 for gsa and .8 for the lemo drops. I am looking into getting a reo grand but will have to wait they are out of my price range right now unless I decide to lighten up my inventory of gsa tanks lol.

@ Lynn or Cheech which uc did you buy??

Here's the one I bought...don't remember it costing that much though.
When you go off the grid, you go off the grid! Good to see you again!

 

[LostVapeMonster]

I think that I must no more lurk,
lest Tibsie appelate me "jerk".

A jerk whose hungry mouth is prest
Against the clearo's vap'rous zest;

A lurker scans and reads all day,
and lifts hiz lazy arms to vape;

A chimer may do more than stare,
and say, "Hello! and Howdy there."

Upon arising asks in vain
for coupons, tips and rayon skein.

Yes, chime I shall without much toil
But Lynn and Cheech can make a coil.

-- with apologies to Joyce Kilmer

 

[Nanny22]

I think that I must no more lurk,
lest Tibsie appelate me "jerk".

A jerk whose hungry mouth is prest
Against the clearo's vap'rous zest;

A lurker scans and reads all day,
and lifts hiz lazy arms to vape;

A chimer may do more than stare,
and say, "Hello! and Howdy there."

Upon arising asks in vain
for coupons, tips and rayon skein.

Yes, chime I shall without much toil
But Lynn and Cheech can make a coil.

-- with apologies to Joyce Kilmer

Beautiful! Brought a tear ...

 

[Cheechako]

I think that I must no more lurk,
lest Tibsie appelate me "jerk".

A jerk whose hungry mouth is prest
Against the clearo's vap'rous zest;

A lurker scans and reads all day,
and lifts hiz lazy arms to vape;

A chimer may do more than stare,
and say, "Hello! and Howdy there."

Upon arising asks in vain
for coupons, tips and rayon skein.

Yes, chime I shall without much toil
But Lynn and Cheech can make a coil.

-- with apologies to Joyce Kilmer

Wow, just wow! The Poet laureate of Airs!
Very impressive!

 

[Cheechako]

Holy Cow! Everybody is showing up today! LVM in the house...

 

[GranFumador]

Soooowee for the bad grammar and funky orthography, Yer Honor.

 

[LostVapeMonster]

Holy Cow! Everybody is showing up today! LVM in the house...

 

[Toastyroadie]

I think that I must no more lurk,
lest Tibsie appelate me "jerk".

A jerk whose hungry mouth is prest
Against the clearo's vap'rous zest;

A lurker scans and reads all day,
and lifts hiz lazy arms to vape;

A chimer may do more than stare,
and say, "Hello! and Howdy there."
Upon arising asks in vain
for coupons, tips and rayon skein.

Yes, chime I shall without much toil
But Lynn and Cheech can make a coil.

-- with apologies to Joyce Kilmer

 

[Toastyroadie]

I think either @Bikenstein or @LynnNC would be able to help you on those questions...
I haven't gone to the TC side yet, still stuck in the kanthal rut!
I do know Bikenstein has a lot of experience with the Lemo...

Ok, thanks.

Bike? Lynn? Any recommendations?

 

[JoeyC]

Thanks for the link Cheech

Here's the one I bought...don't remember it costing that much though.
When you go off the grid, you go off the grid! Good to see you again!

Thanks Trying to find a better paying job which is not easy here in rockford, especially while still working a full time job.