Eleaf ijust 2 rta possiblity?

[Vikesh ludhwani]

I read at a few places and saw a video that the atlantis, the atlantis v,2 the melo, the triton and the ijust 2 use a same coil head. and ijust 2 doesnt have the rba section so i decided to try my hands over the aspire triton rta system which is the rebuildable coil head which fits the aspire triton so i read some where that aspire atlantis , atlantis v2, melo and ijust 2 all of these tanks use same type of coil heads and are interchangeable so was seeking advice regarding this. If some one has already tried using the rebuildable head of the triton on the ijust 2 tank and what were their experiences?? Please let me know


Sent from my iPhone using Tapatalk

 

[suprtrkr]

Never tried it, sorry.

 

[Cam775]

They are interchangeable. I have the Melo and am ordering the Ijust 2 and in my reading it's posted all over from people who have used the coils interchangeably. It seems the concensus is that the Melo coils are better flavor producers than the Aspire.

Search ECF, Fastech, Sweet Vapes and a Google search and the info you seek from first hand users is all there.

Also, there is an rba that fits the Ijust 2, it's not made by Eleaf but another company. Found it: Anyvape Segatank V2 RBA

 

[Vikesh ludhwani]

They are interchangeable. I have the Melo and am ordering the Ijust 2 and in my reading it's posted all over from people who have used the coils interchangeably. It seems the concensus is that the Melo coils are better flavor producers than the Aspire.

Search ECF, Fastech, Sweet Vapes and a Google search and the info you seek from first hand users is all there.

Also, there is an rba that fits the Ijust 2, it's not made by Eleaf but another company. Found it: Anyvape Segatank V2 RBA

what about the atlantis aspire triton rba system


Sent from my iPhone using Tapatalk

 

[Cam775]

I'm not sure what you're asking? The Atlantis and Triton are two different tanks, both made by Aspire.

 

[Vikesh ludhwani]

I'm not sure what you're asking? The Atlantis and Triton are two different tanks, both made by Aspire.

Sorry typing mistake, i am asking the aspire triton rta system would fit ijust 2? As i have read ijust 2 coils are compatible with atlantis and atlantis v2 and the aspire triton coilheads are reverse compatible to atlantis and atlantis v2 so based on this info can i give it a shot(triton rta) by using it in the ijust 2 .


Sent from my iPhone using Tapatalk

 

[Vikesh ludhwani]

Asking coz anyvape segatank rba isnt available easily shipped in my country


Sent from my iPhone using Tapatalk

 

[Rabbit Slayer]

From what I've heard the triton and atlantis coil heads are interchangeable but the "rta" section will NOT work with anything but the triton

 

[Cam775]

Just saw this one, it doesn't specifically say it fits in the ijust 2 but it fits in everything else so I don't see why it wouldn't.

PROJECT SUB-OHM® SAUCECODE™ RBA KIT (COMPATIBLE WITH ASPIRE ATLANTIS AND ELEAF MELO)

Project Sub-Ohm™ SauceCode™ RBA Heads are also compatible with the Aspire Atlantis Series, Aspire Triton, and the Eleaf MELO Sub-Ohm BVC Tank!

Also, I thought the same as Rabbit Slayer about the Triton RBA but I came across this comment (bold below) in response to a question about the ijust 2, so if you can't get the other two RBA's from above shipped to you maybe try it?

Guys, the Aspire Triton RBA section should work perfectly in this. If this needed the top threads of the Atlantis heads, no it wouldn't. But it appears it just seats the top of the coil head against a rubber seal and the tank is held together by the steel frame.

 

[Dougiestyle]

I have the Triton RBA head, and have used it in the Sense Herakles. In my experience, it is best built with vertical parallel. I used 26ga on a 3.5mm mandrel w/ 5 wraps. I bored the wick holes to 2mm with a round mini file, as he stock wick holes look restrictive for high VG, as I use. I experience no dry hits, but have not chain vaped it. If the iJust does not require top threads, it should work.

 

[AlB53]

The Ijust2 does NOT need the top threads, so it should work. where can I get RBA head?

 

[Vikesh ludhwani]

Fasttech


Sent from my iPhone using Tapatalk

 

[thetrucker]

I just bought the Ijust 2 by eleaf and tried the RTA Triton Rebuildable Coil System by aspire and it does work in the

Ijust tank-----tried a .97 ohm 6 wrap 28 guage in the rebuildable head---works good----wanted to try and get away from

the .3 coil that came with the ijust 2--------It is a cloud maker for sure-----but wanted to try something a little tamer...

I watched Ijust 2 reviews on youtube and somebody said they thought it was putting about 80 watts into the .3 coil rite

out of the box.