Hello friends, it's been two days since this warning appeared on my device, I checked several atomizers, but this warning did not go away, please help me, I'm tired, friends.
Attachments
Last edited:
Error sxmini slv2
- Thread starter Hamid Wilde
- Start date
- th_trl_thread_readers 0
Have you tried cleaning out the 510 connection on the mod with a Q tip and some alcohol possibly gummed up and sticking down ?
I'd try another tank or atomiser, just to check.
But as others have said, could be dirt in the 510 connector, atomiser/coil isn't making good contact or it could be an issue with the firmware and may need seeing if there's an update available to fix the error.
But as others have said, could be dirt in the 510 connector, atomiser/coil isn't making good contact or it could be an issue with the firmware and may need seeing if there's an update available to fix the error.
Hi, and welcome to ECF. First, try cleaning the 510 port of your mod with a swab dipped in alcohol or contact cleaner. Also, clean the 510 pin of your atomizer. If that doesn't help, see if your atomizer has an adjustable 510 pin. If it does, and most do, try turning the screw about 1/2 turn using a flat head screwdriver. You want the atomizer to sit just barely flush with the mod. Next, try updating the firmware.
If none of this helps, you can contact After-Sales Service-SXmini-Yihi Electronic Co.,ltd..
SXmini Vi Rod-SXmini-Yihi Electronic Co.,ltd.
Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83915866
www.yihisxmini.com
If none of this helps, you can contact After-Sales Service-SXmini-Yihi Electronic Co.,ltd..
Thank you for your answer. I tested it with a few wires of the atomizer and a new coil. It doesn't recognize the ohms at all. This warning comes up and it doesn't fire at all.
Hello, dear friend, I tested with several new atomizers and coils, unfortunately the same message always appears and I really don't know how to update the device, please guide me.
I've been looking into it @Hamid Wilde but not getting very far unfortunately, SX Mini and YiHi haven't got anything listed for the SL Class V2 or it's chipset when it comes to support.
I'm not giving up though and will keep looking of course, but it may be a good idea for you to contact them via email and report your issue to see what support they can offer.
I'm not giving up though and will keep looking of course, but it may be a good idea for you to contact them via email and report your issue to see what support they can offer.
Thank you, but I think the problem is with the device mode or the software, so I need to know how to update this device from my friends.
Yihi does have a support page for the SX Mini SL Class V2.
The SX Mini SL Class V2 is not firmware upgradeable. See this link:
In my opinion your V2's board is hosed (broken).
If you are able, send it in for repair, or if it's still under warranty get it replaced/fixed.
The main Yihi Support page explains how to get your mod repaired under warranty and out of warranty.
The SX Mini SL Class V2 is not firmware upgradeable. See this link:
SXmini SL Class V2-SXmini-Yihi Electronic Co.,ltd.
Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83865833
www.yihisxmini.com
In my opinion your V2's board is hosed (broken).
If you are able, send it in for repair, or if it's still under warranty get it replaced/fixed.
The main Yihi Support page explains how to get your mod repaired under warranty and out of warranty.
After-Sales Service-SXmini-Yihi Electronic Co.,ltd.
Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83865833
www.yihisxmini.com
@Hamid Wilde have you tried doing a Reset on your V2?
You will see how to do that in the User Manual.
Here is a link to the User Manual:
Go into the Main Menu, select Tweaks, then select Reset All Settings.
At this point it is worth a try.
You will see how to do that in the User Manual.
Here is a link to the User Manual:
SXmini SL Class V2 User Manual--English-SXmini-Yihi Electronic Co.,ltd.
Dongguan Yihi Electronic Co., ltd has been the world's leading chip manufacturer in the vaping industry for 9 years. We devote our great enthusiasm in innovating more useful, smart and professional products. Contact:+86-769-83915866
www.yihisxmini.com
Go into the Main Menu, select Tweaks, then select Reset All Settings.
At this point it is worth a try.
Thank you, it's a pity that it can't be updated, I fixed it exactly, but do you think it might be in strong mode? Can it be fixed in normal mode?
Check your settings on the V2.
Go to the Smart Curves Modes and see which setting is currently selected. If you want normal mode then select Neutral.
The Smart Curves Modes would not (should not) have anything to do with the problem you are experiencing with "No Atomizer Detected".
Per the Yihi manual - "No Atomizer Detected" means "Either the atomizer is not connected, or the unit has detected a problem."
You've tried other atomizers and received the same message. If doing a Reset doesn't correct the problem then in all likelihood there is a problem with the V2 chipset or it's connections to the 510 assembly.
Similar threads
