Evic 1.4 firmware issues

[danlnyc]

Does anybody else have issues with the 1.4 firmware upgrade?

I can't save the alarm temperature in Fahrenheit, only on Celcius.

When I turn the device off and on, it keeps resetting to 45 Fahrenheit instantly setting off the alarm.

When I keep on Celcius, no issues.....

any advise please...

 

[Switched]

It's programmed in celsius, do the conversion and all will be solved.

 

[danlnyc]

It's programmed in celsius, do the conversion and all will be solved.

I have tried that. I've tried keeping it on 113 Fahrenheit which is 45 Celcius.

After a quit reboot, the system forces it back to 45 Fahrenheit, not Celcius which makes it extremely weird.

 

[danlnyc]

It's programmed in celsius, do the conversion and all will be solved.

But if I switch it BACK to Celcius, it'll stay at 45 Celcius and it will save whatever temperature I set the alarm to.

It seems to have an issue with Fahrenheits...

Is this a control head issue? Firmware issue? Defective?

 

[danlnyc]

It's programmed in celsius, do the conversion and all will be solved.

Forgot to note, I've also tried the conversion with multiple different temperatures

 

[danlnyc]

bump! this is really annoying

 

[Orion Pax]

I agree this is very annoying. I would go back to 1.3 if I could. I set mine to Celsius and set it just under the max. Havent had the alarm flashing at me since.
I also find that the ohm check after coming out of sleep mode is equally annoying as it delays you quite a bit before you can vape it. I hope they will fix these bugs.

 

[ImThatGuy]

Good idea orion. Revert it back to 1.3

 

[Jetmec]

I just set mine to never sleep or shut down so the only time I have this problem is when I change the battery. but you are right it is annoying.

 

[Switched]

I have tried that. I've tried keeping it on 113 Fahrenheit which is 45 Celcius.

After a quit reboot, the system forces it back to 45 Fahrenheit, not Celcius which makes it extremely weird.

But if I switch it BACK to Celcius, it'll stay at 45 Celcius and it will save whatever temperature I set the alarm to.

It seems to have an issue with Fahrenheits...

Is this a control head issue? Firmware issue? Defective?

China uses the metric system as most of the world I have never bothered with the alarm settings it is a non-issue for me

 

[freshness]

I have version 1.3, do you guys suggest doing the update? Doesn't seem like it lol

 

[Orion Pax]

All is good with 1.4 but.... if you are like me and put your evic on sleep mode often. Its a hassle. You have to keep it on Celsius and set the temp alarm on Celsius if you dont want it ti reset to 45 degrees Fahrenheit. Also it goes into ohm checker mode for a couple seconds right after waking it.
Also it adds puff alarm limit and time alarm limit to the list of items when you hold the scroll left function. Kind of annoying to me but its all preference.
On the positive side you can invert the colors of the screen as well as fully customize the home screen.
Thats about the just of 1.4... I think I was just so used to 1.3 that the changes are gonna take some getting used to. I still havent got a responce from joyetech on this so I guess ill stop holding my breath. Lol
Hope this helps