Evic vt ....noob here

[Redhatcode29]

hi guys, been vaping for a couple of months.... I recently got the evic vt. i do not know how or what is the ideal setting for tc.

I use a lemo2 with the evic, since the ego tank is .....

how to i adjust the ohm setting.... Its either locked or unlocked, but i cant adjust the ohm setting.

 

[Kwtony]

three clicks, left button and the Ohm will blink, then all you can do is go up and cycle through...

 

[suprtrkr]

I dunno how to adjust it, but I run Ni builds in a Lemo 2. On my Snow Wolf I set 40 watts and 425 degrees. On my SX Mini I set 15 joules and 425 degrees.

 

[Redhatcode29]

three clicks, left button and the Ohm will blink, then all you can do is go up and cycle through...

hi, i know about the three clicks, adjust the tc mode , batt and puff counts....but somehow couldn't digit the ohms setting.... thanks, ill try the left button.

 

[Redhatcode29]

I dunno how to adjust it, but I run Ni builds in a Lemo 2. On my Snow Wolf I set 40 watts and 425 degrees. On my SX Mini I set 15 joules and 425 degrees.

425degrees huh....i think i am running much much less. will try to meddle with it

 

[suprtrkr]

425degrees huh....i think i am running much much less. will try to meddle with it

Even that might be too low; not all machines measure it the same way. I know people who are up in the 500 degree range, and they seem to get by ok. But yeah, run the temp up some and see if that helps.

 

[jefsview]

The ohms, or resistance, is not adjustable. It is the reading of your atomizer. While the ohm setting is unlocked, attach your atomizer onto the Evic VT for the baseline reading. Do not fire the mod. Go into the menu and LOCK in the resistance (ohm), so you can have a consistent TC experience.

You can and should adjust the wattage and temperature if in TC mode, depending on taste. The temp setting is your limit, while the wattage setting will determine how long it takes tor each your temp limit.

Currently with the Ego One Mega default nickle coils, I'm running 35 watts @ 470 F, and adjust on the fly if it's too hot or cold.

I hope that helps.

There is a wealth of info here: Joyetech Evic VT 60 Watt | Page 140 | E-Cigarette Forum

 

[Redhatcode29]

Thank you.... U answered my Q. Now i know that the ohm setting cant be changed. While i was trying to .....

And that i should set the ohm setting upon setting the atomizer.

Also thanks for the info on the wattage... Though i still dnt get this...

Thanks for the link too

The ohms, or resistance, is not adjustable. It is the reading of your atomizer. While the ohm setting is unlocked, attach your atomizer onto the Evic VT for the baseline reading. Do not fire the mod. Go into the menu and LOCK in the resistance (ohm), so you can have a consistent TC experience.

You can and should adjust the wattage and temperature if in TC mode, depending on taste. The temp setting is your limit, while the wattage setting will determine how long it takes tor each your temp limit.

Currently with the Ego One Mega default nickle coils, I'm running 35 watts @ 470 F, and adjust on the fly if it's too hot or cold.

I hope that helps.

There is a wealth of info here: Joyetech Evic VT 60 Watt | Page 140 | E-Cigarette Forum[/QUOT

.

 

[Redhatcode29]

Guys... What will the ideal gauge of the nickel wire, to be used in a lemo2. Also the number of wraps. Thanks.