eVod & ProTank BEST of the Bottom Coils

Status
Not open for further replies.

kwcharlie

Ultra Member
ECF Veteran
Apr 24, 2009
1,213
605
77
Houston
acrigs.com
eVod BCC Clearomizer & Pyrex ProTank by Kanger Ike sells are the best of the new Bottom coils and everyone needs to try a BC, very different than top coils. Both of these are my carry always because they are the best KISS vape I have ever found, been using them over a month and two trips to the Rigs.
Both vape the same and the little eVod is a cheap way to try BC’s.
The ProTank is one finely made piece, looks and feels like something “Greek” and the extra coils and ego bling just sweeten the deal. I haven’t found any problems with these, sometimes feel a little dry [never a dry hit] and I pull a wick thread or two out of the coil but it’s usually time to just change the coil. Use to put a “bunny tail” cotton ball on top of the coil but don’t bother anymore, just fill and vape. Did I say these are KISS?
Only problem is taking them off, be careful unscrewing that you don’t just unscrew the tank, juice everywhere if you do. Follow the video on filling and you won’t have any problems.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
The only problem I see with the eVod is it's only 1.7 ohms. I'm just not a fan of LR stuff. I know...call me an old fart. I can and have bought a lot of LR and used it but if the choice was there I would rather have a higher resistance carto/atty. The Pyrex ProTank is a wi/win for me. over 2.0 ohms I can deal with that and the pyrex tank. I'm sure they will be offering a higher resistance on the eVod in the future.
 

kwcharlie

Ultra Member
ECF Veteran
Apr 24, 2009
1,213
605
77
Houston
acrigs.com
I know 5c but with the Auto eGo it's a winner, ever notice how you never seem to find that sweet spot on a twist? I think its back to the old switching causing vapor harmonics and the auto is just battery DC to it. I'm like you, always looking for the highest ohms to look for that flavor sweet spot in vaping at high volts. How's that worked out for you? Not well for me, in fact the best RBA vaping I'm getting is from ribbon wire on a 0.8 ohm SS mesh that gets so hot you can cook hotdogs like the old buzz BUT this is a pure mechanical with just a battery and switch.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Well if you say so then that will be my next pv. I have never liked 3.7 volt vaping. To me it's like sucking air and with LR I got a burnt taste or not enough vapor. I did see someone vaping on a Blu the other day though and I was amazed at the vapor he blew out. I guess 3.7 volt vaping has advanced some since I used it last. Even when I first started I built a 5 volt just to get a decent hit. There are few people in the vaping world I will take advice from anymore because I ended up with so much junk in my box that was the best you can get but you are one of the people I will believe. If he has any in a week I will pick one up and try it out. Imagine me with an automatic. What's the shutoff time?
]
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
I have help finding my pvs when I lose them.

BuzzProWatcher_zpsad2e2842.jpg
 
Status
Not open for further replies.

Users who are viewing this thread