My Christmas present to myself finally arrived after crossing the Atlantic in a rowboat, and I have had, at long last, time to build her. The mod and atty are convertible from 510 to true hybrid; the mod by removing the top cap and the atty by removing the 510 adapter. She's intended for vertical coils and Genny-type stainless mesh wicks, but I've never done those before and I wanted to get some vape going, so her first build is horseshoe wicked rayon. The build is 28ga Kanthal, 10/9+ wraps-- the legs are 90 degrees apart-- on a 2mm mandrel for .95 ohms.
![20160229_144154[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_144154-1-jpg.535665/ "20160229_144154[1].jpg")
![20160229_144330[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_144330-1-jpg.535666/ "20160229_144330[1].jpg")
![20160229_144422[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_144422-1-jpg.535667/ "20160229_144422[1].jpg")
![20160229_183240[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_183240-1-jpg.535668/ "20160229_183240[1].jpg")
![20160229_183256[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_183256-1-jpg.535670/ "20160229_183256[1].jpg")
![20160229_183932[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_183932-1-jpg.535671/ "20160229_183932[1].jpg")
![20160229_183953[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_183953-1-jpg.535673/ "20160229_183953[1].jpg")
With a battery installed, there's about a .7mm gap between the tube top and the atty base. I think I am going to have to grind the positive screw off about a mm to shorten it up.
![20160229_184346[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_184346-1-jpg.535675/ "20160229_184346[1].jpg")
![20160229_184122[1].jpg](https://www.e-cigarette-forum.com/attachments/20160229_184122-1-jpg.535677/ "20160229_184122[1].jpg")
All things considered, I am very pleased. She's a sweet piece of gear and vapes lie a dream. She's got a locking ring for the button, but doggone if I can figure out why. The button is recessed and it isn't needed.
With a battery installed, there's about a .7mm gap between the tube top and the atty base. I think I am going to have to grind the positive screw off about a mm to shorten it up.
All things considered, I am very pleased. She's a sweet piece of gear and vapes lie a dream. She's got a locking ring for the button, but doggone if I can figure out why. The button is recessed and it isn't needed.
