Fastech's first hybrid clone - The ATTY Aluminum.

[Xobeloot]

The bottom deck in the tank looks funky, recessed and a joint in the center tube!? I thought there was a Noble clone floating around. I'd like one of them to cut the top deck off, ditch the tank and use as a hybrid dripper.

There is a Noble clone floating around. There is also the K300 Juggernaut clone likely to start appearing soon.


Sent from my iPhone using Tapatalk 2

 

[m204prgmr]

My I-ATTY from fasttech arrived yesterday. It came built w/wick n wire already in place. There was a little bag of goodies containing wick, wire, screwdriver, 'O' rings, and another wick already rolled and I assume oxidized. The 510 threading on the base is funky and is not right. It's almost as if the die was a cheap one used to create the threads and not deep enough into the rod during production. When I put it on my ProVari I had to be real careful as to not screw up the PV threading. Putting it on a 600mah battery was not an issue. The unit read .8 ohms on the ProVari and did not fire every single time. That may be due to the low resistance build. When it did fire, great taste and good vape volume.

 

[Lhartman89]

My I-ATTY from Fasttech arrived yesterday. It came built w/wick n wire already in place. There was a little bag of goodies containing wick, wire, screwdriver, 'O' rings, and another wick already rolled and I assume oxidized. The 510 threading on the base is funky and is not right. It's almost as if the die was a cheap one used to create the threads and not deep enough into the rod during production. When I put it on my ProVari I had to be real careful as to not screw up the PV threading. Putting it on a 600mah battery was not an issue. The unit read .8 ohms on the ProVari and did not fire every single time. That may be due to the low resistance build. When it did fire, great taste and good vape volume.

What size is the wick hole if you don't mind me asking?

 

[thesnomonster]

Bought it this weekend. I can try to do a full review on it after I tinker with it. Should be here sep9