Fasttech ~10$ buy reccomendation

[manijak]

Hi everyone, i am new here, at the beginning i apologize if i am hard to understand, english is not my language
Could someone reccomend what to spend the 10$ gift certificate on, on fasttech?
I am currently using some 2$ EVODs from oceanvapour on 5$ EVOD batteries
twist and i16 dual coil from fasttech are already on the way
but i still have the 8,5$ gift certificate on fasttech and dont know what to spend on..
i was thinkig about some "authentic kanger" replacement heads but i read some bad reviews, although there are more good opinions, but the bad ones kills it,
i was also thinking on pro tank mini 2 but there is also one guy with bad expereineces that ruins everything, and i dont know if there would be any difference compared to evod, if i fit it with the "authentic" head for protank, if it fits at all?

, and everything else that i look and read reviews about, someone has to write something negative, so i dont know what to do,what could you reccomend
i am looking to get some quality atomizer that is not thicker than the ordinary eg. twist battery
or at least some quality heads for evod, if there is such on fasttech
is there even need to get some other atomizer or is the evod just fine, but should i then get some good replacement heads?
every opinion is welcome
thanks a lot

$11.95 Authentic Mini Protank-II BCC Clearomizer (1.0-1.5mL) - translucent / 2.5ohm / extra coil head at FastTech - Worldwide Free Shipping
http://www.fasttech.com/products/0/10005274/1423110-clearomizer-coil-heads-for-kanger-protank-5-pack
http://www.fasttech.com/products/0/10004861/1425902-kanger-protank-clearomizer-coil-heads-5-pack

 

[r111]

I have a PT2 and used Kanger heads from FastTech. As long as the link has Kanger or authentic in the title you will be receiving genuine goods.

The FastTech prices are very good.

 

[wonner]

I've got no advice for you, but a big hardy,

Welcome to the forum!

 

[alterdstate]

I got in a couple days ago 5 of the RGM2 glass clearomizers. Throw a kanger or their protank clone head on it and away you go. using it now with an RY4 with clouds of vape and great taste. They are 3.32 there.

 

[tintino]

Welcome to forum.
How do you get these "certificates"... are they gift certificates or was it a promo i missed ?

 

[Romraisin]

Put the resting money in a poor box and pray for your order to arrive before Christmas 2015

 

[manijak]

thanks for the welcomness
so you say this one is good
$3.32 RGM2 Bottom Coil Clearomizer (2.0mL) - glass tank / 2.2ohm at FastTech - Worldwide Free Shipping
i guess because of the glass instead of plastic tank

what do you think about this
http://www.fasttech.com/products/0/10004596/1521200-pre-made-welded-wires-nr-r-nr-100-pack
+
http://www.fasttech.com/products/1411/10004596/1435202

are the specificationsof these wires and wick good(thicknes of wick, length of wires) for rebuilding head on rgm2/evod...??
do you think this would be a good option

 

[rdix33]

Put the resting money in a poor box and pray for your order to arrive before Christmas 2015

If your ordering from Fasttech, you should pray your order arrives at all. Because if there is any type of hickup, you might as well say goodbye to your order and your money. This is from personal experiance.

 

[Gr8Scott]

Get a couple of these "M4 RDA Rebuildable Dripping Atomizer "

Also know as the original Phoenix. For $3.75 each. The best, easiest to build rebuildable atomizer. The top screws on solid and thus won't accidentally come off.

I haven't had bad shipping times from Fasttech, considering it's China, 2 weeks isn't bad IMO.

 

[manijak]

where can i find some more information about this dripping thing, some guide ..., dont really know how it works, do i have to carry bottle of juice around and drip all the time?
what about carrying this thing in a pocket does it leak or something like that?
i kinda have a feeling this is more like for home usage, not portable, maybe it gives better flavour so i am going to try it but we will see,

http://www.fasttech.com/forums/1346104/t/1017064/thoughts
http://www.fasttech.com/forums/1346104/t/1017105/reopenedthoughts-on-plastic-posts/3

now i was reading some reviews and people are complaining about plastic posts, what do you think about it, how long are you using it?
why do you say to get a couple of those, how long does one last?

one of the comments
"DO NOT buy this,After only a few uses one of the plastic post guides melted & it has stopped working.I am trying to get refunded since at the time of my purchase there was NO picture showing the plastic supports(the last pic shows it now)and NO mention of plastic being used inside of the atomizer heating chamber(STUPID DESIGN).Buy the IGO for a few dollars more,its AWESOME!"




and most importantly, are these wires and fiber i mentioned earlyer good for this little dripper thing and rgm2/evod rebuilding?

 

[manijak]

ordered
http://www.pohrani.com/f/3G/Rp/3qCOTFwH/capture.jpg

 

[p.opus]

I'm sorry but I can't recommend anything from Fasttech.

The only positive thing I have to say is that they did refund my money.

I bought 2 "authentic" protank mini's from them and they failed within 3 weeks with glass breakage. Since they were mini protank I's I had to trash the entire tank. Having never seen an actual genuine Protank Mini in person, I trusted the URL, and the packaging and markings on the product all indicated they were actual KangerTech product.

I later got some genuine protank mini I's and began to question just how "authentic" they were. The "genuine" tanks I got from a well known KangerTech reseller are still going strong and had numerous visible differences in the ones I got from Fasttech. Genuine tanks use pyrex glass which have very little thermal expansion. I think my fasttech tanks used normal glass, and my method of cleaning the tanks in hot or boiling water may have induced stress fractures in them.

If something does go wrong with your order, you will wait a minimum of 4 days before you get a response. And their shipping issues lately have been legendary (in a bad way).

If Fasttech is a vendor of last resort, then I would only use them for things that I wouldn't expect to last. I would NEVER buy a battery from them or anything else I have to plug in. I can't trust a vendor that passes their product off as "authentic" and then photoshops all references to the genuine manufacturer from their photos.

When someone complains about a product from a well known quality manufacturer like KangerTech or Innokin, my first thought now is....I wonder if they got it from Fasttech?

 

[higskies]

what do you think about this
$3.25 Pre-made Welded Wires - NR-R-NR (100-Pack) 100-pack - 0.18mm (33 AWG) / 2.2ohm at FastTech - Worldwide Free Shipping
+
$3.78 Silica Wick for Rebuildable Atomizers (5M / 16.4ft) at FastTech - Worldwide Free Shipping

are the specificationsof these wires and wick good(thicknes of wick, length of wires) for rebuilding head on rgm2/evod...??
do you think this would be a good option

The pre-made resistance/non-resistance wire combination is intended for use with the GG atomizer clones (Ithaka, Oddy). I have not used them for any purpose other than that. It is a much better deal to buy a spool of kanthal off of ebay for $5 for rebuilding kanger-style heads. I have never purchased silica from FT, so I can not say the quality is good or bad. I rebuild 1.8ohm microcoils, wicked with organic cotton for all of my kanger heads.

As for a dripper, I hear the IGO-W from FT is good. I have two of them that I bought from another vendor, and love them. I have read that the one's offered by FT are good quality.

Avoid the M4! Those Phoenix RDA's are horrible! This is from experience. Too small to work on, and the build quality of the device is very poor! The posts spin around and/or come out of the base. With the screw on top, you are stuck with wherever the air hole is and cannot reposition it for better draw. There are many better options out there for you.

 

[manijak]

so what now, so many different opinions, dont know what to do, on the other forum they told me to get those NR R NR wires,
what should i do, should i cancel the order or what?
i have the 8.2$ to spend on fastech anyway so i have to get something.
do you think these nr r nr wires and silica wont be good for rebuilding evods, and should i even get this rgm2 or what?

 

[p.opus]

I'd let the order go through. After all, it's not like you are really out anything. It's a Gift Certificate. If you get a positive experience, then you know you have a vendor that works for you. If you have a bad experience, you learned for free.

Win-Win...

 

[danny4x4]

Nothing wrong with using the pre made nr and r wires for rebuilding the evods. In fact, I would recommend using nr and r wires to avoid burning the rubber grommet.

But I have to point out that I've never tried the pre made wires from fasttech. Hence, I can't attest to their quality.

 

[higskies]

I should add that FT has always worked for me. Shipping has been bearable, as long as the item is listed "ships next day" I ordered an Ithaka clone that was not already in stock, and that took over a month to get. Other than that, 10-14 days to north eastern USA. You have to read the reviews and ratings to get a good idea of the quality you are getting. It can be a gamble, but at their prices, it is usually worth it. I like saving money.

 

[manijak]

the guy from a local forum says he has those FT NR-R-NR wires and that they are great, so now the question is, do i need to spend money and time on this m4 even though many people have good expereiences, and higskies doesnt like it at all,
i would like to try this dripping since people say tha flavour is better... but i dont want those big RDAs if i am going to carry it around

and what about rgm2, do i need it if i already have evods , only reasoin that seems to me it is worth getting is the glass tank, is it really necessary?

 

[higskies]

In fact, I would recommend using nr and r wires to avoid burning the rubber grommet..

You may have just saved me a few grommets. Good idea.

 

[manijak]

i have to say, accidentaly i ordered the 2.2 ohm instead of 1.8 that was reccommended on the local forum so i had to change that in the order,

should i cancel the m4, or try it anyway, so what ever comes out of it
i will be sorry for the 5$ if it is trash but i dont know if i dont try, right?

if this m4 is so bad, does anyone else know any other good atomizer(dripping i suppose) not too expensive, and not thicker than a twist?