FatDaddy BF Attachment Kit and BF Pins

[HappiVappi]

Maybe that was a little harsh but tbh I've never gotten worse service and more headaches..

OK, I get this. I am having an FD510 in my hands right now and machining and quality is just as good or bad as all the crap we get from China. I am unaware of any "service" worth to write home about rendered by a Chinese company also.

I'm just saying....

Cheers

Sent from my Transformer TF101 using Tapatalk

 

[OthatGuy]

I like your custom screw setup (gdeal) better than anything so far!

 

[WharfRat1976]

Here is my mod built with Turbos modification of FDs BF kit. It squonks pretty well into an Odin. The squonk is a little airy...it sounds like a toilet flush when it retracts. I made the tube inside the 510 a little long so when I screwed the atty on all the way it pushed the tubing and unseated the worthless nipple at the bottom of the 510 which then proceeded to short out the mod as it was touching the needle. I cut it off with a snips and she fires every time. It took many squonks for the FD needle to grab the juice but when it did it worked well.

The FD stuff is poorly made but if anyone has another source for 510s and BF kits post away. All you really need is a good needle. Tubing is anywhere. BF pins are not needed.

 

[schatz]

I hope you guys have better luck with fat daddys than I did. I used to order from them, every order I made had something missing. I would email and get a fast response and my order corrected. Was o.k. with that, although annoying, until the last order was missing acouple parts and I sent email requesting rectification, and never recieved a response. I guess I will not be ordering from Dennnis at fat daddys anymore. Just curious if anybody else has had these issues. Just my 2 cents.Thanks

 

[RiverNut]

I like your custom screw setup (gdeal) better than anything so far!

does that work with any of the FD 510s? And does it leak at all?

I'm anxious to see Rob's (Reos) new upcoming adjustable 510.

 

[WharfRat1976]

I hope you guys have better luck with fat daddys than I did. I used to order from them, every order I made had something missing. I would email and get a fast response and my order corrected. Was o.k. with that, although annoying, until the last order was missing acouple parts and I sent email requesting rectification, and never recieved a response. I guess I will not be ordering from Dennnis at fat daddys anymore. Just curious if anybody else has had these issues. Just my 2 cents.Thanks

On my 3 orders all went well other than the BF kit was a joke. The needle inside the BF pin is ridiculous.

Where else are you ordering 510's and BF needles or BF adapters to make a squonker?

 

[WharfRat1976]

I forgot the o-ring on my juice bottle cap. I installed it and the thing squonks like a REO...maybe even abit better.

 

[Betox08]

Here is my mod built with Turbos modification of FDs BF kit. It squonks pretty well into an Odin. The squonk is a little airy...it sounds like a toilet flush when it retracts. I made the tube inside the 510 a little long so when I screwed the atty on all the way it pushed the tubing and unseated the worthless nipple at the bottom of the 510 which then proceeded to short out the mod as it was touching the needle. I cut it off with a snips and she fires every time. It took many squonks for the FD needle to grab the juice but when it did it worked well.

The FD stuff is poorly made but if anyone has another source for 510s and BF kits post away. All you really need is a good needle. Tubing is anywhere. BF pins are not needed.

So to do it this way, all I need to order from FD is the 510 and the BF kit (needles and tubing)? Or do also need the BF pins?

 

[OthatGuy]

You need to make sure you get the bf positive pins that the needles go thru aswell, they come with long or short tails

 

[custom-classic]

So to do it this way, all I need to order from FD is the 510 and the BF kit (needles and tubing)? Or do also need the BF pins?

You do not need the bf pins.

The bf needle IS the pin.

 

[WharfRat1976]

So to do it this way, all I need to order from FD is the 510 and the BF kit (needles and tubing)? Or do also need the BF pins?

You do not need the pins. If you look at my pic, all that you see is the BF feeder needle into 1/16th tubing into the drilled out delrin into the 510. The 1/16th tubing is tight to the delrin so is not going anywhere. It also acts to get a good seal under a BF atty so your juice is not seeping out under the atty.

 

[Betox08]

You do not need the pins. If you look at my pic, all that you see is the BF feeder needle into 1/16th tubing into the drilled out delrin into the 510. The 1/16th tubing is tight to the delrin so is not going anywhere. It also acts to get a good seal under a BF atty so your juice is not seeping out under the atty.

Ok thanks, thats how I thought it was but I wanted to make sure.