Favorite voltages for favorite FSUSA niquid?

[maureengill]

So...now that I have my provari....I've been changing voltages (which I love) to get the kick and sweet spot from my niquids....

What are your favorites and what voltage do you vape them at?

 

[mauisun]

4.2 volt

 

[mwa102464]

For me every liquid has a peak best voltage, with a lot of it depending on the PG/VG/Flavoring content, and Atty/Carto that you run. Some taste better at lower voltages some in the mid range and some in the HV Range. 1 voltage for every liquid just doesn't cut it for me, I find that for fruits it is one voltage, tobaccos another, dessert another, bakery another, this is why having a mod like your provari comes in very handy Maureengill, I use 2 of them, a Darwin, and some other VV Mods, I also find a mod with (PWM) makes for a better vape then one that doesn't run on PWM. Lot's of variables come into play for me, that's for sure and if I only could use one voltage I would feel very limited. Vape On ;-)

 

[rahn]

I'm really too new at this, I think, to know what voltage works best for what. My pv's have vv with 3 settings and if it doesnt work right for whatever I'm vaping, I just change until it works best...but I seem to be a 3.5 volts mostly.

 

[okwithit]

i had an infinity and didn't really like the taste of the juice using it, (so i gave it too a friend). would a provari or buzz pro be any better or different? i like the cooler tasting juice

 

[Anaconda]

Well, I like most of my juices around 4.5 volts on a standard 510 atty. If I'm using the triple coil carto's (smokTech) from FSUSA, I vape at 5.2 volts, but you better be prepared for the hit, cause it'll knock you out if you aren't ready.

For those looking for a higher TH, without sacrificing flavor... get a triple coil carto. You won't regret it.

 

[vaporgalinfla]

Honestly, I've become lazy and have been sticking with 3.8 voltage on my Provari. All my liquids taste great! But when I was adjusting voltages, I recall that some flavors were better at higher voltages (but I can't remember which ones). Sorry that I wasn't able to help.

 

[maureengill]

Well...the provari goes down to 3.3 volts and up to 6.0 volts. So if what you like is 3.3 or higher I'd think it would be okay. I tend to stick between 3.7 and 4.5 volts (usually go to 4.5 when I start bugging for a smoke and want the throat hit...). I've found most of my fsusa niquid (50-50) can be good between 3.7 and 4.2 volts but if I don't like the way it tastes I just adjust it. I'm currently vaping Lucky Leprechaun at 4volts.

Although if you don't like the higher voltages you may want to try something like the jessy that gives you the option of 3.5, 3.6, or 3.7 volts...

i had an infinity and didn't really like the taste of the juice using it, (so i gave it too a friend). would a provari or buzz pro be any better or different? i like the cooler tasting juice

 

[caffeinated]

My primary PV is a Silver Bullet, and I vape at 6v pretty much full time, (using a pair of 3v LiFePO4 batteries). However, I'm expecting delivery (today please?!) of a new GLV-2 Super-Mini and a trio of AW IMR 16340 3.7v batteries. This tiny PV only accommodates a single battery, and I'm really hoping that I can get it to provide a satisfying experience using 1.8ohm dual-coil cartos.

Oh, and to answer the OP's question: I really like RY4, Hopscotch, Wyatt Earp, and Vanilla Xtreme at 6v. If the USPS delivers my new hardware today, I'll soon see how those liquids taste at 3.7v.

 

[okwithit]

thank you missgill, can i hook my map tank on top of the jessy? 510 connection?

 

[Anaconda]

I put a little more thought into your original question today.

I find fruity flavors great @ 4.2v - 4.8v
Caramel / butterscotch flavors @ 4.0-4.5v
Choloate flavors 4.2 or under, I just find that higher voltages = burnt taste with chocolate
Menthol Flavours, the sky's the limit. this is the most versatile flavours out there.

Enjoy

EDIT: I didn't mention above, but this is on a standard 510 atty (2.4 ohms)

 

[Secti0n31]

I got one of the VV egos (piece of crap, center pin dies) and I really loved 4.2v on a 2.8ohm ce2 fat wick. I think I'm gonna get a legit VV mod sooner rather than later so that I can try the whole 4-5v range.

 

[maureengill]

Okwithit,

I don't use tanks, but I'll see if I can find you an answer....

thank you missgill, can i hook my map tank on top of the jessy? 510 connection?

 

[bebeste]

For the 510 standard atomizer, 4.3 volts is the sweet spot for me.

 

[cozzicon]

So...now that I have my provari....I've been changing voltages (which I love) to get the kick and sweet spot from my niquids....

What are your favorites and what voltage do you vape them at?

Kinda depends on that atty or carto being used. But in general 4.1 or 4.2 on 2.4 ohm atties.

I've been running an Easy Tank with Boge 3.0 ohm cartos recently- this I run at 4.5 with New/Port.

Not really a high voltage guy. But the regulated nature of the Provari gives a consistent vape with micro voltage fine tuning

 

[mauisun]

Kinda depends on that atty or carto being used. But in general 4.1 or 4.2 on 2.4 ohm atties.

I've been running an Easy Tank with Boge 3.0 ohm cartos recently- this I run at 4.5 with New/Port.

Not really a high voltage guy. But the regulated nature of the Provari gives a consistent vape with micro voltage fine tuning

I concur

 

[LordDavon]

I like my CherryBomb on a 2.6-2.8ohm CE2 at 4.6Volts. I like it best on a 3.4ohm CE2, at 5V! ;-)

Hopscotch, I like at lower voltages. Not sure why, but I think it is due to it being almost a year old and really thick.

Hypnotic Mist is really good at 5.5V on a 3.4ohm CE2.

Cappuccino Smooth, steeped 1 year, well... it's finger licking good! At about body temp. Oh, you can vape it too. I like it in a tank, 2.0ohm DC carto and I don't care about voltage. It's just love in a tank!