I surprisingly got my Reo in the mail today and my RM2 won't screw in all the way to make connection. It seems like you have to force it which I'm not about to do..
Finally got my Reo and my RM2 won't screw in all the way :(
- Thread starter justinonymous
- Start date
- th_trl_thread_readers 0
- Status
The RM2 is fine, I just screwed it onto another mod just to make sure it works. I tried cleaning the Reo threads and it still won't go in. I think I might have to scotchbright the threads because they might be too big? I've had the same problem with Patriot threads that were too big but never a mod.
I've been playing with some scotch Brite trying to sand down the threads a little. It barely worked so far so I'm kinda just sadly staring at it.
Edit: just stuck a carto on it and it worked. Rm2 still won't go in all the way hmm
Edit: just stuck a carto on it and it worked. Rm2 still won't go in all the way hmm
Last edited:
You probably know this but never hurts to ask and just to be clear have you tired firing it? The milled part will not go all the way down and will still be visible when seated correctly.
If your not having any luck pm me your order number I can send out another atomizer
perhaps try a 510-510 adapter to see if it works. I wish you luck on your own, but Rob will help out. He's the man!
Yeah I tried firing it and it didn't work. Both the reo and rm2 work but my boss decided to just vice it in so it's working now. It works amazingly but I hope nothing goes wrong lol.. Thanks guys!
With that O-ring in place, it takes some power to screw it down all the way. Glad it's working for you!
Welp, it's working now, so success! I found my RM2 was a b!tch, too like that with the little O-ring on. Find out, mine fits and threads better without it. You may not need the O-ring installed, either.
How do u place an O ring? On the catch cup? I found tht mine doesn't leak without an o ring. But decided to be safe and put one. But it's kinda tight to screw the RM2 down and the air hole is facing my firing button now. Lol. Wondering what's the right way to place the o ring?
Yeah they can get tighter with the O-ring installed. Rob also sells a thicker one that might place it at the right spot. I've also read that people have gone to home Depot and purchased the right diameter O-rings in different thicknesses. If you weren't leaking you don't have to use the o-ring. I like it because it makes the RBA nice and tight without going to far in and messing up the firing pin or the insulator around it.
personally yours sound perfect now! I fire with index finger so I like the airhole facing the button.
personally yours sound perfect now! I fire with index finger so I like the airhole facing the button.
I just received my Reomizer 2 today and I have the same problem. It doesn't fit into the well of my Grand.
I'm able to use it by putting on a 510 adapter. No problem with the threads, it fit and worked on my Provari.
Seems the diameter is too big and will not go into the well far enough to make contact with the positive pin.
Is this an abberation or are all of them like this?
I'm able to use it by putting on a 510 adapter. No problem with the threads, it fit and worked on my Provari.
Seems the diameter is too big and will not go into the well far enough to make contact with the positive pin.
Is this an abberation or are all of them like this?
Does the center pin of the RM2 sit slightly proud or a little further out than the threads?
- Status
