First micro coil build

[Just_Pete]

Wanted to try a twisted micro build. Using 32G Kanthal wire, 5 wraps, cotton. Getting a 1.5ohm reading and set to 3.7v. Getting descent vapor production and definitely a warmer vape. My coils could be tighter but hey it's my first build. Have 29G wire in the mail coming so I'll try with that. What would be the sweet spot with 29G in terms of wraps?

 

[UncleChimney]

I use 28ga on a mechanical mod and with 7 wraps on my PT2 I usually end up right at .8Ω.

 

[Jazzi Mike]

I use 10 wraps on 1/8" bit for 1.5 ohms. It is pretty good for me.