first post can anyone help

[carlitouus]

Okay so im from Jersey. Im Carlo btw.

So I cant post on other sections like genral discussion?sorry if the answer is very obvious or out there already.

I got a vamo v2 and recently got it hipefully forum will help me in my quitting journey.

 

[XfooYen]

Welcome, Carlo. Keep posting in the New Members Forum. After 5 posts, you can post in other areas of the forum. Theres plenty of people to keep you on your path. Good luck and congratulations on quitting those stinky sticks!

 

[Baditude]

http://www.e-cigarette-forum.com/forum/new-members-forum/295861-new-members-must-post-5-times-new-members-forum.html

By the way, welcome.

 

[carlitouus]

Thank you guys and yea theyre getting more and more disgusting by the day. Im having trouble using the vamo tho, the ohms change suddenly and cant seem to find a way to change it, anyone know how to by any chance?

 

[Katya]

Hi Carlo and welcome to ECF. I don't own a Vamo, but as soon as you get your 5 posts, you'll be able to ask your question in the Vamo subforum. In the meantime, you can start reading here (just click on the link):

VAMO

 

[carlitouus]

Thabk you sir! Ill start reading as we speak!

 

[JackShift]

Welcome Carlo, hope we can be as much help to you as this forum has been for me.

 

[carlitouus]

Thanks jack, forums is pretty interesting as I honestly have no clue on how to use this devices to the fullest yet. I only play w voltage and the tanks can be a pain. I broke two already, and is it normal that the ones the ecig comes w are very crappy?like burnt taste overheating juice etc...?

 

[docp1620]

Hi Carlo, Welcome, as far as using your vamo there are lots of video's on u-tube that can offer help with setting it up. Some of the ones to look for are by GrimmGreen and pbusardo. they both have sections for the new vapor. they both helped me a lot when i first started vaping. If the ohms are changing then something is not right with your atomizer or clearomizer, possibly the coil going bad, an example would be if the resistance of you pro tank was 2.2 ohms and is now 4.6 or higher. when the vamo reads 9.9 then the current is not getting through and the coil has popped or blown. hope this helps some

 

[Baditude]

What kind of tanks are they, Carlo? Cartotanks, clearotanks, RBA tanks?

 

[ItTechy]

carlitouus,

Welcome!

Ask away we will do all we can to assist you!

 

[carlitouus]

Clearotanms I believe its the vivi nova to be exact, it changes from 2.1 2.3 2.3 2.4 between those.

 

[Baditude]

Clearotanms I believe its the vivi nova to be exact, it changes from 2.1 2.3 2.3 2.4 between those.

Ok, that's helpful. Are you using voltage or wattage mode?

 

[Jeremy Langford]

Welcome Carlo!

 

[carlitouus]

Voltage, 3.8-4.2 and 6mg nic. Juice. I sometimes notice change in vapor temperature, I.e itll burn me and taste like it. I move the tank around to I guess get the strips wet. Any tips maybe im doing simething wrong? Is wattage better than voltage ?

 

[Baditude]

Voltage, 3.8-4.2 and 6mg nic. Juice. I sometimes notice change in vapor temperature, I.e itll burn me and taste like it. I move the tank around to I guess get the strips wet. Any tips maybe im doing simething wrong? Is wattage better than voltage ?

Either voltage or wattage mode works, they use a different method but get to the same place.

A general rule to follow is to take the ohm rating and add "2" and that will be a nice start point. So 2.3 ohm + 2 = 4.3 volts. Then adjust up or down to your preference.

Top wicked clearomizers like the Vivi Nova will need to be "tipped" or swirled to keep the wicks nice and wet, especially as the juice level falls in the tank.

 

[Baditude]

 

[carlitouus]

Yea ive noticed that. Thank you I will try that

 

[carlitouus]

i hate the tank though ill switch soon the whole tipping it a lot is annoying lol thank you guys.

 

[Baditude]