First REO on the way!

Status
Not open for further replies.

SteamStack

Ultra Member
ECF Veteran
Verified Member
Aug 7, 2014
2,248
5,252
Macomb, MI, USA
Make sure ti cut a v shape cut in the bottom of the tube so the tube don't seal on the bottom of the juice bottle.. makes for easy squankin thst way.

I've noticed with the new ss 510 for some reason the bottle will move up the tube with ease once wet. Never had that prob in the past but now on all 3 of mine with the new ss 510 it happends and at first I thought the tube was short enough by default to not seal up on the bottom of the bottle but here it can and will.

Also when the bottle does rise up the tube the bottle will rattle a little on the door. So I have to pull the bottle back down to keep it snug.
 
  • Like
Reactions: Debadoo

Spydro

Sindoyen
ECF Veteran
Verified Member
Apr 20, 2013
5,835
22,113
nowhither
Welcome
spygratsreo.jpg

It doesn't get any better than a Reo/Nuppin' combo,
unless you have two of them.
 

SteamStack

Ultra Member
ECF Veteran
Verified Member
Aug 7, 2014
2,248
5,252
Macomb, MI, USA
Congrats! Very sexy! Now just make sure to carefully cut a inverted v shape on the end of your feed tube so there no chance of the tube sealing up on the bottom of the juice bottle.. thst would make squankin slow and difficult and impossible if it seals up.

Also make sure afterwards to put the top off your atty and get a feel for how long to squank for as its easy to tell when you can see the juice rise up. And do thst agsin when the bottle is about half full and you'll notice you need to squeeze the bottle much longer when the bottle gets low.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
It doesn't get any better than a Reo/Nuppin' combo,
unless you have two of them.
Totally agree!!! Grand and a nuppin = vaping bliss. I need anudder nuppin. hehehe

That is fantastic Connel!! One thing you may want to do, is adjust the 510 so that the airholes are side to side when vaping (if you tilt the fire button toward you to vape). Some find that it makes for a better vape when the air hole isn't pointed toward you. I personally found that I liked it better when I cut my cotton before putting it through the second coil, but probably depends on your coils, and definitely on each person's taste. I still use the same piece of wick for both, but it just seems better when I put it through one, cut it, then put through the other and trim. YMMV. Welcome to Reoville, and can't wait to hear how you like it!!! As rattytat said......come visit us in the lounge!! We'd love to get to know ya! and even though you aren't from Tx, be sure to get on the reo roll call hehehe
hi fist bumps.gif
 
Status
Not open for further replies.

Users who are viewing this thread