i found the T3 doesnt leak unless you tip it up. It also leaked two drops in a ziplock in my backpack (may have inverted).
the Vision V3 and eGo CE4 do not leak ever, or gurgle but you do have to roll them to wet their wicks when half full or less.
i've taken to storing the T3 upright and the V3 and CE4 laying. no leaks that i can see wherever i put them. As i read here, i do think the long wicks and top burner of the V3 and CE4 use juice faster than the T3 as compared when i fill the T3 half full and the others nearly full (about 1.5mL). I also notice more juice thickening with the long wicks as they absorb the less viscous components first. The small wick bottom coil T3 does not or not nearly as much.
the material of the Kanger T3 is supposed to be more chem resistant than previous or other clearos. It certainly feels thick and well made, feels almost like glass. i've ordered several more and mini T3s from Sun Vape. When opening this or the others, i wipe the center tube, check the wicks and silc gaskets are seated. After refill i use a small torn piece of paper towel, twist it up, and wipe up the top tube and fine threads before resealing. Any gurgling is small and disappears thru use or storing the T3 upright. I also want to try the top coil T2 to compare to the V3 and CE4+
The Vision spinner 1300 at 3.7v is fine for me. at work i turn it down to 3.5 or 3.6 to vape while sitting in my cubicle. same for the eGo twist 900. Both produce lots of vapor at 3.7, 3.8, 4.0 have not gone higher than 4.0 much at all.
Fit: i love the CE4 on the 900, its perfect (both eGo made). The collar matches great and provides a nice finger reference. The Vision V3 also fits beautifully on the 900 and feels good. You can tell the chromed steel is thicker and better quality, as weill as the tank and even the mouthpiece is more gloss black and smooth. The T3 has a bit more diameter than the 900 barrel, not much but feels lil top heavy as the T3 even half filled seems to weigh more but feels like good quality.
the T3 really feels right on the 1300 spinner. The Spinner body is larger diameter than the T3 and has more heft than the 900. The extra weight reminds you to tilt down with this BC. This is a great combo. The Vision V3 also feels and looks right on the 1300 (both Vision) while the CE4 feels puny like a laser pointer on the tip of the 1300.
thats my review so far, both batts are blue. The CE4 was blue and the V3 and T3 were clear. Love to be in the world of vaping and on this forum!
the Vision V3 and eGo CE4 do not leak ever, or gurgle but you do have to roll them to wet their wicks when half full or less.
i've taken to storing the T3 upright and the V3 and CE4 laying. no leaks that i can see wherever i put them. As i read here, i do think the long wicks and top burner of the V3 and CE4 use juice faster than the T3 as compared when i fill the T3 half full and the others nearly full (about 1.5mL). I also notice more juice thickening with the long wicks as they absorb the less viscous components first. The small wick bottom coil T3 does not or not nearly as much.
the material of the Kanger T3 is supposed to be more chem resistant than previous or other clearos. It certainly feels thick and well made, feels almost like glass. i've ordered several more and mini T3s from Sun Vape. When opening this or the others, i wipe the center tube, check the wicks and silc gaskets are seated. After refill i use a small torn piece of paper towel, twist it up, and wipe up the top tube and fine threads before resealing. Any gurgling is small and disappears thru use or storing the T3 upright. I also want to try the top coil T2 to compare to the V3 and CE4+
The Vision spinner 1300 at 3.7v is fine for me. at work i turn it down to 3.5 or 3.6 to vape while sitting in my cubicle. same for the eGo twist 900. Both produce lots of vapor at 3.7, 3.8, 4.0 have not gone higher than 4.0 much at all.
Fit: i love the CE4 on the 900, its perfect (both eGo made). The collar matches great and provides a nice finger reference. The Vision V3 also fits beautifully on the 900 and feels good. You can tell the chromed steel is thicker and better quality, as weill as the tank and even the mouthpiece is more gloss black and smooth. The T3 has a bit more diameter than the 900 barrel, not much but feels lil top heavy as the T3 even half filled seems to weigh more but feels like good quality.
the T3 really feels right on the 1300 spinner. The Spinner body is larger diameter than the T3 and has more heft than the 900. The extra weight reminds you to tilt down with this BC. This is a great combo. The Vision V3 also feels and looks right on the 1300 (both Vision) while the CE4 feels puny like a laser pointer on the tip of the 1300.
thats my review so far, both batts are blue. The CE4 was blue and the V3 and T3 were clear. Love to be in the world of vaping and on this forum!
Last edited:
