Focalecig chat...Part 2

[Nikkita6]

Some good new arrivals on FC this morning

Now they have the istick, also the vapor flask but it is the V1, think I will wait and hope to see the V2 pop up sometime soon, but am considering the IPV2, good price and I still have a $10 coupon, really tempted but might have to wait till after Xmas

Ugh why did they stock the Vapor Flask V1? No one wants that thing .. it better not be more than $40 because that is all its worth I didn't check new arrivals so I will go see in a minute ...

 

[Sturm]

I was going to get an rba and rda. Wanted something i could use for a little of everything.

 

[roxynoodle]

Well, I'm vaping my Orchid at about 44W. However, build it to 0.7 ohms and 30W would be plenty.

 

[Nikkita6]

I was looking at the flask's, I don't see a way to change the battery's. I see there is a charge port, must be it's like the iStick? But in the description it lists it takes 18650's

Don't do it Willy, there is no way to change or know what kind of battery is in that thing. I do not trust China to pre-install good 18650 batteries .. The manufacturer is practically giving that clone away because no one with even a modicum of vape knowledge wants that device.

 

[Nikkita6]

Anybody see the Cloupor Mini pre-sale VapingCheap announced for $29.99? From what i've casually read Cloupor chips have not been up to par lately but at this price i may just have to jump on one. Thoughts?

Err .. well, Cloupors V3 DNA chip is good, in fact the best chip that they made, so it may be alright?

 

[Nikkita6]

I just looked .. one of the VF clones is extremely tragic looking, the buttons are hideous protruding like that The other two don't look as janky but I still wouldn't go there.

And I wonder what would make FC stock the clone of the Tobeco Aqua V2 clone when they are already selling the real Tobeco? I swear their product department applies absolutely no intelligence or discrimination to their choice, they literally stock whatever

FT is selling the clone of the Tobeco clone for 14 bucks, so I don't know who they think is gonna buy that.

 

[Nailz]

Nailz, did you notice the ipv2 is a clone?

Yes I did, I don't care if it works and the chip is good, everything I have apart from a billow and lemo is clones

 

[Pclarity]

I am now depending on my focal orders to come through for me this weekend because the atty I bought from ecig5 was a piece of leaking junk. *sighs*

Gonna give it a few more tries, but my goodness...can't wait to get my real stuff lol

1 order down, 5 to go.

 

[Nailz]

Don't do it Willy, there is no way to change or know what kind of battery is in that thing. I do not trust China to pre-install good 18650 batteries .. The manufacturer is practically giving that clone away because no one with even a modicum of vape knowledge wants that device.

Yea really taking a gamble on something with pre-installed batteries, you have no idea how low of a resistance you can go safely, and even if they list how low it can go, I sure wouldn't trust it, seems crazy that it is taking so long to get a good v2 clone, they are quick enough to clone the aqua v2 and kayfun 4, why so long on the VF 2, just hope when they do release them (as sure someone will clone it eventually) it is worth the wait.

 

[Nailz]

Well, I'm vaping my Orchid at about 44W. However, build it to 0.7 ohms and 30W would be plenty.

All my builds are 0.50ohms and I only vape at 25watts and get a very good vape, 30 watt devices is enough for me, and even if got something like the IPV2, wouldn't vape anywhere near 50 watts.

 

[skin_e1]

roxynoodle. I posted on another discussion group but I thought you should see this I just got off of my Kayfun 4 and now I am back on my Rose V2. With that being said. The Kayfun 4's flavor and vapor is Bad To The Bone I have been playing with the Juice control and I think I may have cut my wick properly I was running at 1.4 ohms. Maybe it's just me. Note they are both authentics, But with that being said the clone will appear soon. I would go as far as saying the kayfun 4 is beating the Rose V2 sligthly. . When a good clone
comes out, I would definitely check it out

 

[Sturm]

maybe is will just get the mini then. i was worried that i would feel held back having 1 mod and it only going to 30. If Ill be okay with rebuildable tanks and drips on it then i might have to do it as i like the look better. I was only starting to look at that DNA 50 because they were about the same price but got 20 watts more. I was just a little worried about the quality.

 

[roxynoodle]

I have my Orchid on a mech . So 44W it is, lol! However, I do tend to keep similar vaping habits on my regulated mods, and some I like at higher power than I get on a mech. The Lemo and Roses I have running at like 4.5V.

 

[Nikkita6]

Yea really taking a gamble on something with pre-installed batteries, you have no idea how low of a resistance you can go safely, and even if they list how low it can go, I sure wouldn't trust it, seems crazy that it is taking so long to get a good v2 clone, they are quick enough to clone the aqua v2 and kayfun 4, why so long on the VF 2, just hope when they do release them (as sure someone will clone it eventually) it is worth the wait.

Do you really want them to rush a Vapor Flask V2 clone? I don't .. Besides can't compare the time it takes to clone an atomizer, to an electronic devices housing 2 18650's hun. ;-)

 

[Sturm]

Doesn't give me much in the way of confidence when the shopping carts don't work

 

[nelsonm64]

kinda off topic but you all gotta watch this. the Chinese using a water pipe to vape, hilarious! silly buggers...

https://www.youtube.com/watch?v=_qbzWYsq5Hw#t=153

 

[KTMRider]

maybe is will just get the mini then. i was worried that i would feel held back having 1 mod and it only going to 30. If Ill be okay with rebuildable tanks and drips on it then i might have to do it as i like the look better. I was only starting to look at that DNA 50 because they were about the same price but got 20 watts more. I was just a little worried about the quality.

Fasttech just listed the Cloupor Mini for $36.36 this morning. 12 days to ship so about the same time as other vendors to get into your (my) grubby little hands (12 days + 14 for shipping). You really should have at least 1 backup. When I started on cig-a-likes, I had 2 batteries and within 6 months, one of them died. I ordered 2 more and the 2nd died shortly after receiving my order. I would've definitely gone back to analogs if I didn't have backups.

kinda off topic but you all gotta watch this. the Chinese using a water pipe to vape, hilarious! silly buggers...

https://www.youtube.com/watch?v=_qbzWYsq5Hw#t=153

Looks like college kids using a .....

 

[jbarrick]

"Fasttech just listed the Cloupor Mini for $36.36 this morning. "

In the cart, I will let you know i think.

 

[KTMRider]

"Fasttech just listed the Cloupor Mini for $36.36 this morning. "

In the cart, I will let you know i think.

Don't forget the code (XMAS14) for 5% off.

 

[jbarrick]

Anyone know anything about this BADBOY ?
Todd did a review

LUXYOUN 50W Variable Wattage VW Box Mod - Brown