Ok so I finally got the sweet spot on my IGO-w. EKOWOOL Silica Wick 3mm about 1.25 inches long. A bit of food grad RTV on the ends to keep it from unravelingB. eing careful that none is near the coil and only on the outside of the wick. Wrapped 7 turns of 34ga kanthal wire around it. Snipped off one end near the wick on the piece that is near the side of the IGO. Tucked the other under the coil. Ended up with 1.5 ohms. total. I can us it on all my mods that way. Dry burned it to make sure nothing nasty was on the coils etc.. Filled it and DAMN. Was able to run a lower wattage than before and good vapor and taste. Here are some pics.
![20130725_034625[1].jpg](https://www.e-cigarette-forum.com/data/attachments/121/121376-b823d3641fec3922811e2ae86ed2538f.jpg "20130725_034625[1].jpg")
