Fsusa juice is awesome in an ego tank!

[Free2BMe]

To finish T's story.....

....and they all lived happily ever after, 'til the evil mixing blendologist David announced another massive list of new juices in 2 days.

Of course, that just starts another chapter.

 

[TexasT]

then I take a small screwdriver and slightly lift up on the inner plug just above the wick on both sides. This takes the pressure off of the wick

Hey samsmom, I'll try that. Real good idea.

Free dahlin, for once I can truthfully say I hope there are no new flavors ... well, at least not too many. Gosh, there are just soooooo many really good juices at FSUSA!

 

[Andy1100]

Just got my tank system for my eGo last night. Amazing! Hasn't leaked a drop, big vapor and flavor, absolutely love it. Just screw on the cone type atty, pop off the little cover on the the tank/cart, fill it leaving a little space (used the 30ml bottles, wyatt earp and one applewood) snap the cap back on push the tank/cart down on the atty till it clicks in (have to push kinda hard) and vape away! The wyatt earp ran out about 15 min ago, snapped in a applewood and it's going strong! Well worth the money. I got 2 attys and a pack of 5 tanks. If you're an eGo fan you've got to do it!! The biggest thing I like about it is the cleanliness, no more messy, leaky carts. i figure i could prefill 2 tanks and have about a day and a half heavy vaping on them... Very cool.
(I can see how the caps of the tank could be hard to pop off for some people though, and a syringe would make refilling easier for those folks)

 

[samsmom]

HEY!! My FIRST Sticky!!!!

 

[TexasT]

Hey samsmom, congratulations on the Sticky!

I've already posted this elsewhere, but the FSUSA Tank Atomizers are four dollars less expensive (each) and the Tank-Mouthpiece part is two dollars less expensive for five pieces than the other supplier where I bought my first Tank system.

FSUSA is not only giving us a fantastic variety of e-juice, but is setting a standard for fair prices on its hardware. We've all wanted a one-stop place to shop for juice and hardware and FSUSA seems determined to be that One-Stop Supplier!

 

[Andy1100]

Damn it! Sorry guys I didn't know FS had it at all, let alone cheaper...... All right, I love the FSUSA guys and gals, it's always a pleasure, fantastic service, excellent products.....BUT the website needs some help. I just read the post about FS having the tank stuff and it still took 5 minutes to find it when I KNEW they had it. Really need some sub categories and ways to find the products a little easier. Not complaining too much, but I don't have time to spend searching through 9 pages of eGo stuff just to find something like this. I just wonder how many sales are lost due to this issue. Love you guys.... just sayin!

 

[salemgold]

Damn it! Sorry guys I didn't know FS had it at all, let alone cheaper...... All right, I love the FSUSA guys and gals, it's always a pleasure, fantastic service, excellent products.....BUT the website needs some help. I just read the post about FS having the tank stuff and it still took 5 minutes to find it when I KNEW they had it. Really need some sub categories and ways to find the products a little easier. Not complaining too much, but I don't have time to spend searching through 9 pages of eGo stuff just to find something like this. I just wonder how many sales are lost due to this issue. Love you guys.... just sayin!

Thanks Andy. I know that they are aware of needing to upgrade the site a little. I think that they have just been so busy with getting the vape lounge going it had to be put on the back burner. I will pass your thoughts along.

 

[TJVapes]

Ha Andy it took me about a month to find the new products box, lol.

Definitely coming around to one-stop shopping. Def need XL clearomizer and 900 mah ego battys in all colors. I don't buy juice anywhere else. I ordered from a few suppliers that make my face break out in a red,itchy rash.. can't have that. Since I blew my atty out it's rocking right along. cappuccino smooth now is my new fav and I'm gonna chase it with the awesome peppermint mocha.

 

[samsmom]

Ha Andy it took me about a month to find the new products box, lol.

Definitely coming around to one-stop shopping. Def need XL clearomizer and 900 mah ego battys in all colors. I don't buy juice anywhere else. I ordered from a few suppliers that make my face break out in a red,itchy rash.. can't have that. Since I blew my atty out it's rocking right along. cappuccino smooth now is my new fav and I'm gonna chase it with the awesome peppermint mocha.

Can you explain exactly how you blow out an atty - I guess I'm dumb, but how do you do this? With canned air? Or with your mouth? TIA for your help!

 

[TexasT]

Can you explain exactly how you blow out an atty - I guess I'm dumb, but how do you do this? With canned air? Or with your mouth? TIA for your help!

The lil' devil in me wanted to put in a bunch of LOL's and ha, ha, ha's ...but I'm going to be sweet. Because you'd probably give it back to me because I don't know how to work the Voltmeter and nobody will tell me. So I'll be nice.

I wash my atty's out (usually every night - sometimes every other night) with hot water and I blow the hot water down through the atty with my mouth. Then I sit down with a napkin or paper towel and blow through them until no more water comes out. Some people prefer to use compressed air.

I let them air dry over night (some use a hair dryer, oven, etc.) and then the next morning I "prime" my atty with several drops of juice right on the atty, snap on the tank and vape away.

 

[samsmom]

The lil' devil in me wanted to put in a bunch of LOL's and ha, ha, ha's ...but I'm going to be sweet. Because you'd probably give it back to me because I don't know how to work the Voltmeter and nobody will tell me. So I'll be nice.

I wash my atty's out (usually every night - sometimes every other night) with hot water and I blow the hot water down through the atty with my mouth. Then I sit down with a napkin or paper towel and blow through them until no more water comes out. Some people prefer to use compressed air.

I let them air dry over night (some use a hair dryer, oven, etc.) and then the next morning I "prime" my atty with several drops of juice right on the atty, snap on the tank and vape away.

Thanks T, and get your mind out of the gutter!!!! Be ashamed!

 

[TexasT]

Thanks T, and get your mind out of the gutter!!!! Be ashamed!

What gutter? Where? How did I manage to miss a gutter? This is terrible? I've spent so much time in gutters that I use the buttons on the arm cuff of my shirts as "curb feelers!"

 

[vaporgalinfla]

The lil' devil in me wanted to put in a bunch of LOL's and ha, ha, ha's ...but I'm going to be sweet. Because you'd probably give it back to me because I don't know how to work the Voltmeter and nobody will tell me. So I'll be nice.

I wash my atty's out (usually every night - sometimes every other night) with hot water and I blow the hot water down through the atty with my mouth. Then I sit down with a napkin or paper towel and blow through them until no more water comes out. Some people prefer to use compressed air.

I let them air dry over night (some use a hair dryer, oven, etc.) and then the next morning I "prime" my atty with several drops of juice right on the atty, snap on the tank and vape away.

I've read mixed views on washing attys. Some people use alcohol, some use water, and others say to not wash them unless they are starting to perform badly. I'm using one right now that's been going non-stop for almost two weeks and I've not washed it once. I washed another one with alcohol, let it dry for 24 hours and have been using it for about a week w/ Thin Mint. Have you tried using an atty and not washing it?

I tried to help you with your Voltmeter! Did you try using the different numbers on the ohm part? Turn the voltmeter on and click on each setting until you get a reading of "1." That should be the setting to use when measuring ohms on a carto or atty. At least that's how I figured out how to use mine. Try it!

 

[TexasT]

I tried to help you with your Voltmeter! Did you try using the different numbers on the ohm part? Turn the voltmeter on and click on each setting until you get a reading of "1." That should be the setting to use when measuring ohms on a carto or atty. At least that's how I figured out how to use mine. Try it!

Yes dear. Ma'am.

I did. On the X10 setting it goes to zero (clear over on the right hand side of the scale) and from there when I check the carto or atty I get about 3. Its a little hard to read but I think that's right.

And I had already done this all by myself earlier. I'm not just another pretty face. Even though I do have a pretty face.

On cleaning the atty's what I usually do is nothing ... until I detect the taste or amount of vapor falling off then I do a rinse, vodka soak, rinse and dry.

Now to the important stuff. How's your finger???

 

[vaporgalinfla]

Yes dear. Ma'am.

I did. On the X10 setting it goes to zero (clear over on the right hand side of the scale) and from there when I check the carto or atty I get about 3. Its a little hard to read but I think that's right.

And I had already done this all by myself earlier. I'm not just another pretty face. Even though I do have a pretty face.

On cleaning the atty's what I usually do is nothing ... until I detect the taste or amount of vapor falling off then I do a rinse, vodka soak, rinse and dry.

Now to the important stuff. How's your finger???

I'm glad you figured it out. So the ohms are 3.0? Now I forgot which carto you were trying to measure.

That's what I'll do with my attys. So far though, I'm amazed that the one I've been using a lot has been going strong for about two weeks without washing it.

My finger is not doing very well. In fact, it looks worse and it hurts a lot if I take the splint off. I have an appointment with a hand specialist at a sports medicine place on Feb. 4th. I originally had an appointment for this week, but he cancelled it because of some stupid emergency. Thanks for asking!

 

[deusXmchna]

Okay, so looking at the FS website...
It says the tanks fit on the "ego-T atomizers", but there is no such animal for sale..
so:
do these eGo tanks fit on the product "Black eGo Mega Atomizer" aka product:
FreedomSmokeUSA

Also is the "Black eGo Mega Atomizer" cone shaped? On other sites, I've seen it described at cone shaped, but in this product descript, there is nothing mentioning cone shaped.

Thanks!

 

[deusXmchna]

Nevermind... just found the eGo-t attys.

Can the ego-t attys be used with a drip tip, in case of emergency?

 

[louis]

Its a 808D1 thread fat bat that shows 3.5 volts at full charge.

louis

 

[zenoland]

How do refill them? Not a syringe, I hope!

I used a syringe in the beginning but now I manage with a pipette. I do get some spillage because my hands are a little shaky (which I had with the syringe too), but I can fill a bunch of tanks very quickly.