GeekVape Z50 + Z Nano tank
The Geekvape Z50 kit uses a small mod with a built-in 2,000mAh battery with 50W of maximum output. Circuit functions include Power, Bypass, VPC, TC-TCR, TC-SS modes with Type-C 5V-2A charging.
The 3.5ml sub-ohm Ø22 atomizer (2ml TPD) uses the direct high dynamic top-down airflow to reach the coil more quickly and efficiently, the coil is hit by a large amount of d air for maximum yield.
Enjoy the reading.
Packaging:
The kit is depicted on the front with the wording and the Geekvape logo, the identification of the color (Silver) and the product, with some data; Z50 3.5ml 2.000mAh.
On the back, some main features are listed in the form of writing and represented by different icons. They are also present; the packing list, the invitation to read the instructions for use, the address of Shenzhen Technology Co Ltd, the bar code, the scratch / check and the inevitable logos & trademarks required by law.
Package Included:
1 * mod Z50
1 * 3.5ml Nano Z Atomizer
1 * Replacement Glass Tube (2ml TPD)
1 * Geekvape B Series Mesh-Coil 0.3Ω Range 30-38W (pre-installed)
1 * Geekvape B Series Mesh-Coil 0.6Ω Range 15-25W
1 * USB Type-C cable for charging
1 * Coil Tool
1 * Spare 510 Drip-Tip
7 * Spare O-ring
Technical data Mod Z50:
• Material: Zinc alloy
• Mod weight: 120g
• Dimensions: 84.1x30.7x24mm
• Output voltage: 0.5V ~ 7.0V
• Range of supported resistances: 0.1 ~ 3.0Ω
• Battery capacity: 2000mAh
• Charging specification: 5V / 2A
• Low voltage warning: 3.2V ± 0.1V.
• PCBA temperature alarm: 80 ° C
• Cut Off: 10 seconds
• Stand-by current: <10uA
• Operating temperature: 0 ℃ ~ 45 ℃
• Storage temperature: - 20 ℃ ~ 60 ℃
• Cooling mode: natural cooling
Technical data Z Nano Tank:
• Material: SS
• Dimension : Ø22.00 * 56.55mm
• Thread: 510
• Capacity : 3.5ml
• Drip-Tip: 510 replaceable
• AFC: From top to bottom
• Refil: From above
• Coil compatibility: Geekvape B Series Coil
Geekvape Z50 Kit Colors:
• Silver, Gunmetal, Black, Rainbow.
The Sample subject of this review arrived in an elegant Silver color.
First impressions:
The Zeus Nano atomizer present in this kit is a faithful scaled-down copy of the famous Zeus Sub-Ohm Tank that equips the new Aegis L200 Legend 2.
Zeus Nano is designed for RDL use in full harmony with the device that delivers 50W Max of power. The Coils are both of the new Mesh type.
I particularly appreciated the presence in the package of a 3.5ml Bubble glass to immediately replace the small glass of 2ml capacity (TPD) .
The Mod Z50 is slim and slender, built in sturdy zinc alloy, weighs about 120g has a simple design but with artistic decorations, a nice color display and several functions, in addition to the classic VW mode are present; Bypass, VPC, TC-TCR, TC-SS. Not bad!
Geekvape claims to have been aesthetically inspired by nothing less than the Doric columns of the Acropolis of Athens. The color gold or marble IML coating of the side panels gives a nice bright and energetic look.
Ergonomics:
GeekVape Z50 gives good feedback in the hand thanks to the smooth surface that contrasts nicely with the decorations perceptible to the touch. The Mod is undoubtedly sturdy not too heavy and is easily handled.
Z50 Display and rear:
The dark colored screen extends all along the front of the Z50. At the top is the slightly protruding Fire key, in the center a nice bright and colorful display with indications of; battery level, current mode, power, Ohm, Amper, Volt and Puff counter.
Below we find the adjustment keys "+" and "-" and at the bottom there is a USB-C 5V-2A port for charging.
On the back, the refined similarity with the Doric column of the Parthenon is supported by the new "mythological" logo of Zeus in a central position and by the thin and deep vertical grooves. From bottom to top, the word "Geekvape Z" appears.
Z50 Above and below:
The 510 thread cup contains the floating type gold plated pin and is screwed to the mod via 2 torx screws. The cup have a serial number on the edge.
They can be installed perfectly and without 22 / 23mm atomizers protrusions.
On the bottom of the Z50 there is a curious cap of unidentified soft material, which should "melt" and allow the battery to vent in case of problems.
Always on the bottom there are the disposal logo, the brand (C E) and are indicated; the characteristics of the cell, the place of origin and the manufacture by Geekvape.
The Geekvape Z50 kit uses a small mod with a built-in 2,000mAh battery with 50W of maximum output. Circuit functions include Power, Bypass, VPC, TC-TCR, TC-SS modes with Type-C 5V-2A charging.
The 3.5ml sub-ohm Ø22 atomizer (2ml TPD) uses the direct high dynamic top-down airflow to reach the coil more quickly and efficiently, the coil is hit by a large amount of d air for maximum yield.
Enjoy the reading.
Packaging:
The kit is depicted on the front with the wording and the Geekvape logo, the identification of the color (Silver) and the product, with some data; Z50 3.5ml 2.000mAh.
On the back, some main features are listed in the form of writing and represented by different icons. They are also present; the packing list, the invitation to read the instructions for use, the address of Shenzhen Technology Co Ltd, the bar code, the scratch / check and the inevitable logos & trademarks required by law.
Package Included:
1 * mod Z50
1 * 3.5ml Nano Z Atomizer
1 * Replacement Glass Tube (2ml TPD)
1 * Geekvape B Series Mesh-Coil 0.3Ω Range 30-38W (pre-installed)
1 * Geekvape B Series Mesh-Coil 0.6Ω Range 15-25W
1 * USB Type-C cable for charging
1 * Coil Tool
1 * Spare 510 Drip-Tip
7 * Spare O-ring
Technical data Mod Z50:
• Material: Zinc alloy
• Mod weight: 120g
• Dimensions: 84.1x30.7x24mm
• Output voltage: 0.5V ~ 7.0V
• Range of supported resistances: 0.1 ~ 3.0Ω
• Battery capacity: 2000mAh
• Charging specification: 5V / 2A
• Low voltage warning: 3.2V ± 0.1V.
• PCBA temperature alarm: 80 ° C
• Cut Off: 10 seconds
• Stand-by current: <10uA
• Operating temperature: 0 ℃ ~ 45 ℃
• Storage temperature: - 20 ℃ ~ 60 ℃
• Cooling mode: natural cooling
Technical data Z Nano Tank:
• Material: SS
• Dimension : Ø22.00 * 56.55mm
• Thread: 510
• Capacity : 3.5ml
• Drip-Tip: 510 replaceable
• AFC: From top to bottom
• Refil: From above
• Coil compatibility: Geekvape B Series Coil
Geekvape Z50 Kit Colors:
• Silver, Gunmetal, Black, Rainbow.
The Sample subject of this review arrived in an elegant Silver color.
First impressions:
The Zeus Nano atomizer present in this kit is a faithful scaled-down copy of the famous Zeus Sub-Ohm Tank that equips the new Aegis L200 Legend 2.
Zeus Nano is designed for RDL use in full harmony with the device that delivers 50W Max of power. The Coils are both of the new Mesh type.
I particularly appreciated the presence in the package of a 3.5ml Bubble glass to immediately replace the small glass of 2ml capacity (TPD) .
The Mod Z50 is slim and slender, built in sturdy zinc alloy, weighs about 120g has a simple design but with artistic decorations, a nice color display and several functions, in addition to the classic VW mode are present; Bypass, VPC, TC-TCR, TC-SS. Not bad!
Geekvape claims to have been aesthetically inspired by nothing less than the Doric columns of the Acropolis of Athens. The color gold or marble IML coating of the side panels gives a nice bright and energetic look.
Ergonomics:
GeekVape Z50 gives good feedback in the hand thanks to the smooth surface that contrasts nicely with the decorations perceptible to the touch. The Mod is undoubtedly sturdy not too heavy and is easily handled.
Z50 Display and rear:
The dark colored screen extends all along the front of the Z50. At the top is the slightly protruding Fire key, in the center a nice bright and colorful display with indications of; battery level, current mode, power, Ohm, Amper, Volt and Puff counter.
Below we find the adjustment keys "+" and "-" and at the bottom there is a USB-C 5V-2A port for charging.
On the back, the refined similarity with the Doric column of the Parthenon is supported by the new "mythological" logo of Zeus in a central position and by the thin and deep vertical grooves. From bottom to top, the word "Geekvape Z" appears.
Z50 Above and below:
The 510 thread cup contains the floating type gold plated pin and is screwed to the mod via 2 torx screws. The cup have a serial number on the edge.
They can be installed perfectly and without 22 / 23mm atomizers protrusions.
On the bottom of the Z50 there is a curious cap of unidentified soft material, which should "melt" and allow the battery to vent in case of problems.
Always on the bottom there are the disposal logo, the brand (C E) and are indicated; the characteristics of the cell, the place of origin and the manufacture by Geekvape.