GeekVape Zeus RTA

Status
Not open for further replies.

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,855
136,853
West Frankfort, IL
GeekVape_Zeus_RTA_Atomizer_Clone_1514120664684_7.jpg
:facepalm: Newb fly trap.
 

Thiago C

Ultra Member
Feb 11, 2018
1,487
180
Geekvape Zeus - Zero flavor, gurgling when refilling and juice going up

Hi fellows!

I have the TPD version of the Zeus and I’m going mad after several problems I had with it. Right now I’m having zero flavor, gurgling when refilling the tank and juice going up to the drip tip.

I think it’s a dumb idea but to get rid of the gurgling I blowed in the drip tip and got juice leaking through the airflow. I did that before trying to avoid spitbacks and I almost emptied a full tank just blowing air in the drip tip and getting it leaked through the airflow holes. I think you can’t do that with this tank. I got rid of spit backs by pushing the coil higher, as high as I could, in the deck.

Here’s a short video I made explaining the problems and showing my build in the deck:



Any help or suggestion will be very appreciated! Thanks!

PS: I’m new into RBAs so I have no previous experience. I’m also having a hell of a time with the Berserker MTL RDA (juice coming up in the drip tip). My right arm is broken and I only have my left arm/hand. I’m right handed so it’s tricky to build/rewick using only my left hand.
 
  • Like
Reactions: KC0YNU

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,855
136,853
West Frankfort, IL
Geekvape Zeus - Zero flavor, gurgling when refilling and juice going up

Hi fellows!

I have the TPD version of the Zeus and I’m going mad after several problems I had with it. Right now I’m having zero flavor, gurgling when refilling the tank and juice going up to the drip tip.

I think it’s a dumb idea but to get rid of the gurgling I blowed in the drip tip and got juice leaking through the airflow. I did that before trying to avoid spitbacks and I almost emptied a full tank just blowing air in the drip tip and getting it leaked through the airflow holes. I think you can’t do that with this tank. I got rid of spit backs by pushing the coil higher, as high as I could, in the deck.

Here’s a short video I made explaining the problems and showing my build in the deck:



Any help or suggestion will be very appreciated! Thanks!

PS: I’m new into RBAs so I have no previous experience. I’m also having a hell of a time with the Berserker MTL RDA (juice coming up in the drip tip). My right arm is broken and I only have my left arm/hand. I’m right handed so it’s tricky to build/rewick using only my left hand.

Would be easier if you showed us a pic of your build with and without wick. From the side please, pictures from above the coil aren't helpful.
 

puffon

Vaping Master
ECF Veteran
Verified Member
  • Sep 18, 2014
    5,928
    15,765
    Florida
    Gurgling after filling, sounds like not enough wick blocking the wicking channels.
    Juice will bypass the wick and flood the deck.
    Try pulling some wick up so it lays loosely over and covering the juice channels.
    Take care when putting the chimney over the deck, I've noticed it can push the wicking out of place.
    For more flavor try closing the air down some, and even try a 510 DT.
     
    • Like
    Reactions: KC0YNU

    Thiago C

    Ultra Member
    Feb 11, 2018
    1,487
    180
    Gurgling after filling, sounds like not enough wick blocking the wicking channels.
    Juice will bypass the wick and flood the deck.
    Try pulling some wick up so it lays loosely over and covering the juice channels.
    Take care when putting the chimney over the deck, I've noticed it can push the wicking out of place.
    For more flavor try closing the air down some, and even try a 510 DT.

    Thanks, puffon! Can you tell me if this amount of cotton is enough? I'm cutting it so it barely touches the bottom of the deck.

     
    • Like
    Reactions: KC0YNU

    puffon

    Vaping Master
    ECF Veteran
    Verified Member
  • Sep 18, 2014
    5,928
    15,765
    Florida
    Thanks, puffon! Can you tell me if this amount of cotton is enough? I'm cutting it so it barely touches the bottom of the deck.

    In that photo, no, looks like not enough wick (on the right side) is blocking the juice channel.
    I use a 3 or 3.5mm coil.
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,855
    136,853
    West Frankfort, IL
    I put my coils in the Zeus a little closer to the deck and your wick could be a bit thicker imo. Hard to tell from the pic but I would try a thicker wick. I clip my coil legs and wick the way Daniel shows here and have not had any issues.
     

    Dubminer

    Ultra Member
    ECF Veteran
    Apr 10, 2016
    1,431
    4,905
    So after 18 months of not buying a tank, this morning i ordered a SS Zeus. I usually only MTL and fancied an alternative to DL with. How is this tank with high VG? like 80 VG/20 PG. Also i normally MTL at anywhere between 22 mg and 32 mg nicotine and was wondering a starting point with the Zeus. Is it a big cloud maker like really open. I was thinking maybe 12 mg nicotine. Any help would really be appreciated. Planning on a 6 wrap single SS 316 L 26 GA spaced coil at about 0.50 ohms on a DNA device in TC. Does that sound ok and is the Zeus stable in TC.
     
    • Like
    Reactions: KC0YNU

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,597
    179,959
    Somewhere between here and there
    It does fine with high vg liquids. I normally run 12mg in mine and was a 24-32mg mtl user in the past. I'm not sure how that coil will be since I always use Clapton wire. I'm sure it'll be fine though. I run two of mine in TC curve mode and they seem to do fine.
     
    Status
    Not open for further replies.

    Users who are viewing this thread