Genesis Stile RBA's VS Kayfuns, Aquas, Ithakas, Taifuns GT, etc.

[AMDTrucking]

Genesis Atty could be a pain in the “A”, until you get it right. I’ve learned that the hard way. Now I’ve got a hold of AGA-T3, Steam Turbine and Kraken. Set them up in one hour (all three of them). And they worked like a charm from the first build. I guess, it is like riding a bicycle…

​

​

​

http://www.use.com/2014_01_18_1_f3d151a24db082ef281a?p=4http://www.use.com/2014_01_18_1_f3d151a24db082ef281a?p=4http://www.use.com/2014_01_18_1_f3d151a24db082ef281a?p=4[/CENTER]
I started with Genesis stile: I-Atty, RSST. Spent a lot of time with them building and re-building trying SS Mash, Ceramic, SS Rope, Ekowool and even Organic Catton. It was very frustrating. Then I bought my first kayfun 3.1 and I loved it because it worked great from my first build. Then two more Kayfuns, one Aqua, one Taifun GT and Ithaka. They are all great devices. Now, that I’ve got those Genesis stile Atty’s working – I like them even more because they perform much like my rda’s no less.
What is the matter with me? I can’t decide what is better. ​

 

[i_L1fe]

I see nothing wrong.

Only gennys I used for close to a yr was the AGA T2. Finally got the u wick down right cutting mesh diagonal. Once I got my kayfun w/ micro coil cotton I left the gennys behind. Have an Altsmoke omega but preferred the Vamo for battery regulation. Can't stand battery drop off...Anyway always a constant struggle I had with the AGA T2 was it shorting out on the mesh. I'd burn is so hot on my gas stove but a fresh wick/build always give me hell. Vamo low ohm...swap to mech...pulse...work vamo for a little...short. Leave house...low ohm, no vape. I'm done with that.

+1 cotton not carrying electricity.

Not saying Gennys bad. Just something like 10x easier for me to build a kayfun. And taste hmm good.

 

[TwinTurbo120]

I'm going for the Kayfun for my first rda. Cons and pros to all I guess.

 

[AMDTrucking]

I'm going for the Kayfun for my first rda. Cons and pros to all I guess.

Words of wisdom: If you are OK with Kayfun 3.1 Clone, then stay away from FastTech.com one. I’m not saying they are bad (I’ve got two of them) but they are kind of OK clones. I have one by EHPro – it is a really good Clone but it doesn’t have a “Svoe Mesto” logo on it. And HCigar clone is just perfect. I suggest HCigar Kayfun 3.1

 

[emus]

Glass tank Gennys are easy to fill and wick fast w/ cotton wick.
I'm not a fan of plastic tank.
Upright Genny doesn't leak.
I prefer small air chamber.

 

[edg64]

I have Two kayfuns what an awesome tank wish I had gotten one when they first came out. my quote " you haven't tasted your juice until you have vaped a kayfun..

 

[AMDTrucking]

I’m just a long haul truck driver and here is how my truck dashboard looks like.

​

 

[Subdivisions]

Well, that will help you on the long hauls I'm sure!!

 

[Amateur hour]

My first rba was the rsst liked it so much I bought an aga t3 and aga td I've also got a scar rda and just ordered a kayfun lite plus clone made by tobeco i got rid of everything I own that isn't a rebuildable

 

[AMDTrucking]

It may be stupid, but I like Taifun GT SS Mash setup, that I tried setting up Kayfun 3.1 with Stainless Steel Mash U-Wick, 0.6mm X 0.01 (roughly = 30 Gauge). With 5 Wraps – 1.3 Ohms. It works well so far. I’ve been vaping it all day today. It vapes and tastes just like my Genesis Atty’s and Taifun GT. Here, I proved it. Kayfun 3.1 can be used with Stainless Steel Mash Wick.

​

 

[ricko233]

Wow! Gonna try the mesh on the kayfun someday!

 

[toughguitar]

I use both styles of RDA's. It depends on the juice I'm using. I have found some juices taste different(not bad) in a kayfun or aqua. I'll use a genny with cotton for those juices. Some juices are great with mesh in a aga-t2 or an RSST. I'll try juices in different setups to find my personal sweet spot.