Genisis LV and Box Kronos

Status
Not open for further replies.

Tai Pan

Resting In Peace
ECF Veteran
May 30, 2010
191
217
Germany
Hi all,

I am Uwe - Tai Pan from the German ERF forum. We are running two projects there and want to invite you as well to join.

Genisis LV
This is an atomizer, which principle has been developped by Raidy and the design by Ichbines.

It uses resistance wire and mesh and a 1,5 ml bottle as a tank. Made completely out of stainless steel.

Box Kronos
This is an alumiunium box, powder coated, which commes in four colours and four connector types, Cinch, 510, 801,901. The box is electronically regualted and has a battery holder with a protection circuit for 18650 batteries.

Our shop, which we use to handle the orders, is only in German in the moment. I will setup an English one in the next days with new photos. Payment is by PayPal and shipping by registered Air Mail.

This projcet is approved by Raidy. He wants, that all vapers can use the Genisis advantages for very low prices, if they whish.

The German shop is here http://board-projekte.de and you can reach me by mail here: info@board-projekte.de.

Uwe


Closing thread for posting:
From the site:
The dead line for Genisis III was the 02.08.2011. We will not make another series.
The dead line for the box Kronis is the 15.08.2011. We will not make another series.
 

Attachments

  • genisis-lv-1.jpg
    genisis-lv-1.jpg
    5.3 KB · Views: 1,736
  • kronos-kl.jpg
    kronos-kl.jpg
    6.1 KB · Views: 1,733
Last edited by a moderator:

Tai Pan

Resting In Peace
ECF Veteran
May 30, 2010
191
217
Germany
The Genisis is either a kit or ready made with RCA or 510 connector. As you wish. :)
Kronos is a ready working box including electronic, a reduction brass ring to 14,5 mm for the eGo people and with a charger with Mini-USB connector.
The electronic has PWM and you can regulate between 100% and 60% power. The battery connector can be changed very easily to RCA, 510, 801 or 901.
 

slimest

Ultra Member
ECF Veteran
Feb 1, 2011
1,623
541
Russia, Moscow
ecigroom.myqip.ru
Uwe, is it possible to read a more detailed technical information about your Box Chronos? For example is output voltage stabilized or just counts from input voltage, max output current, discharge protection, overcurrent protection, weight, dimensions, principle of operaton (for example, we adjust output voltage digitally, using buttons or use a potentiometer), switches or a touch sensors etc...
Also I did not understand completely if a charging circuit is built in and we just need 5 volts to charge the module, or we have to use a separate charger.
 
Last edited:

Tai Pan

Resting In Peace
ECF Veteran
May 30, 2010
191
217
Germany
Box Kronos

A lot of mails and PN reached me and therefore here some answers:

The box is in the production state. The construction is ready for calculation and we will do the layout and PCB now. When the PCB is ready the constructor will change his design to optimize the size of the box. Than we go in production.
Time Frame: about three month

Features:


Box body out of aluminum powder coated in this colours:
- transparent (polished and transparent coating)
- RAL 9005 - jet black
- RAL 5017 - traffic blue
- RAL 6026 - opal green

- 18650 unprotected battery in a battery holder with protection circuit
- PCB in SMD
- micro processor controlled
- main switch on the PCB
- battery connector holder where the connectors can easily be changed
- polished brass ring around the atomizer hole 21/19,5 mm
- reduction ring out of polished brass for the eGo users, 21/14,5 mm
- Mini USB connector for charging the battery
- charger 5V/500 mA with Mini-USB

Program
- PWM
- regulateable voltage between 50% and 100%
- low battery warning at 3,4 V
- electronic lock by software
- red and green LED for status indication

I hope this helps.
We are just working to bring the shop into English. Partially it is done, the rest will follow.

German Project Shop

I am working on new photos for the Genisis. Will come shortly.

Uwe
 

slimest

Ultra Member
ECF Veteran
Feb 1, 2011
1,623
541
Russia, Moscow
ecigroom.myqip.ru
Uwe, one more question: what does it mean-
"low battery warning at 3,4 V"? It means that after reaching 3.4 V the system switches off, or just signs? And is there a real threshold for complete swithing off?
And, sorry, I did not get an answers to some of my questions... Would be better if you put a technical information about your device. Of course I don't mean a schematic diagram and firmware, just technical parameters written by a guy who made it :)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread