Gettin NERVOUS!!!!!

Status
Not open for further replies.

mudhill

Ultra Member
ECF Veteran
May 23, 2012
1,030
1,001
versailles mo.
Since my T2's and T3's don't cut it for me using an adapter, I took the plunge and ordered an ego twist. Waiting for the delivery hopefully today. I dont want my stash of Kangers to go to waste. I noticed that you like it set at 3.2 & 3.3.. Is it better flavor at that setting? I know nothing about vv but willing to learn. And yes! It seems vape spending will not end $$$$$$$$$$$$$$$$$$$ :laugh:

it is for me,,,,of course i am using a 2.4 ohms replacement coil that came with T3.

i have order 2 additional r.coils at different ohms to try and see what works for me.

go to gotvapes ( "T3 central",,,,,, page and take a look ).
 
Last edited:

Lorimere

Full Member
Sep 3, 2012
33
34
North Carolina
Since my T2's and T3's don't cut it for me using an adapter, I took the plunge and ordered an ego twist. Waiting for the delivery hopefully today. I dont want my stash of Kangers to go to waste. I noticed that you like it set at 3.2 & 3.3.. Is it better flavor at that setting? I know nothing about vv but willing to learn. And yes! It seems vape spending will not end $$$$$$$$$$$$$$$$$$$ :laugh:

At lot of it depends on the juice. Figure the X2 uses around 3.7 volts. For me on a Vision Spinner (yes picked one up after i got my T3s). I find that the flavor on some of my juices really work great at about 4.0-4.3.
But I have 2 flavors that are best at 3.5-3.7

Honestly didn't expect VV to make much of a diffrence, but it surprised me. Of course I have a lot of diffrent juice mixes also. from 70/30 to 50/50 to 100 VG.
 

niterider

Ultra Member
ECF Veteran
Verified Member
Jun 7, 2012
1,585
6,892
State College, PA
Same here. It depends on the Juice. I couldn't set it any higher than 3.7 Volts for Key lime Pie but could crank it up to 4.4 Volts for this Tropical/Menthol Blend I have. This using the standard 2.4 Ohm T3.

I'll also note that I have noticed a "break in" period. After the 3rd or 4th refill, the flavors really start coming out.
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
Same here. It depends on the Juice. I couldn't set it any higher than 3.7 Volts for Key lime Pie but could crank it up to 4.4 Volts for this Tropical/Menthol Blend I have. This using the standard 2.4 Ohm T3.

I'll also note that I have noticed a "break in" period. After the 3rd or 4th refill, the flavors really start coming out.

Hopefully that is the case. I really want to like these things. I do know one benefit.. 100% vg works nicely in them. I did flip the seal trick on one.

I did get a huge mouth of liquid last night that was slightly unpleasant. The gurgling seems never ending. Never happened with my CE3.
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
There's a spreadsheet that was posted on ECF here.

Looking at it, we could use a 2.0 ohm carto, maybe even 1.8, and get decent results. I plan on trying some 2.0 ohms in the future.

I do believe there may be some issues regarding low res atties at certain volts. I am unsure what they are.. just a heads up. If not well then feel free to ignore. I am on hold/talking with the IRS for the last 2 hours and I feel like I am discussing things with my 10 year old. :)

At least they aren't in India.
 

JoAnnW

Vaping Master
ECF Veteran
Verified Member
Oct 19, 2012
4,602
13,011
B'more MD
Hopefully that is the case. I really want to like these things. I do know one benefit.. 100% vg works nicely in them. I did flip the seal trick on one.

I did get a huge mouth of liquid last night that was slightly unpleasant. The gurgling seems never ending. Never happened with my CE3.

I had some leaking from the mouthpiece of the T3 when I was going to add more liquid. The level was down to about 0.8ml. I took it off the battery first of course, turned it upside down and unscrewed the bottom. Liquid started dripping out of the tip. Any idea why?
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
I had some leaking from the mouthpiece of the T3 when I was going to a more liquid. The leve was dow to about 0.8ml. I took it off the battery first of course, turned it upside down and unscrewed the bottom. Liquid started dripping out of the tip. Any idea why?

Hate to say it but probably a seal in the mouthpiece. This is all from what I have read. Pure speculation on my part.

I did read some have said not to fill upside down but more horizontally. That will stop that, maybe.

Some stated they took them apart and resealed. I am not gonna even bother with that at this time. I am still loving the ce3. Sorry if some of the quote was deleted. Stupid tablet is giving me fits tonight. My wife wouldn't like it if I brought my secretary home.:)
 

abracadebra

Vaping Master
ECF Veteran
Oct 19, 2012
3,161
12,275
Queensland banana bender land of OZ
Hate to say it but probably a seal in the mouthpiece. This is all from what I have read. Pure speculation on my part.

I did read some have said not to fill upside down but more horizontally. That will stop that, maybe.

Some stated they took them apart and resealed. I am not gonna even bother with that at this time. I am still loving the ce3. Sorry if some of the quote was deleted. Stupid tablet is giving me fits tonight. My wife wouldn't like it if I brought my secretary home.:)

hey bluecat im still leakless......well to tell the truth.....some are still leaking........but it has slowed the flow in some...and some have totally stopped leaking..................cheers meow
 

WorksForMe

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Sep 21, 2012
2,020
4,776
N.N., Virginia
I had some leaking from the mouthpiece of the T3 when I was going to add more liquid. The level was down to about 0.8ml. I took it off the battery first of course, turned it upside down and unscrewed the bottom. Liquid started dripping out of the tip. Any idea why?

I don't know exactly how this happens. I think that the liquid that's around the coil runs down the air tube when you turn the T3 upside down and loosen up the coil assembly. It shouldn't leak after you fill the T3 and put the coil assembly back in place. This happens to me a lot.

J.R.
 

mudhill

Ultra Member
ECF Veteran
May 23, 2012
1,030
1,001
versailles mo.
I don't know exactly how this happens. I think that the liquid that's around the coil runs down the air tube when you turn the T3 upside down and loosen up the coil assembly. It shouldn't leak after you fill the T3 and put the coil assembly back in place. This happens to me a lot.

J.R.

i think you are right about juice of the coil,going in to the air tube when you take it off,,but no big deal,just shake it out and wipe the tip.
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
hey bluecat im still leakless......well to tell the truth.....so are still leaking........but it has slowed the flow in some...and some have totally stopped leaking..................cheers meow
That's great! There is a huge learning curve on this stuff.

The only delivery device that has been truly leak/condensation free for me is the viva. I always had condensation issues with the clearo..Mine were pre x2 clearo. The way i vape I am always blowing vapor back in the device. I breathe in and then out through the nose while takenig in another hit.

The only reason I never tried the x2 clearo was they offered the ce3. Got to admit though after 4 to 5 months of using the ce3, i am getting tired of syringe filling. Still my favorite vape.
 

bluecat

Vaping Master
ECF Veteran
Jun 22, 2012
3,489
3,658
Cincy
I don't know exactly how this happens. I think that the liquidcouldn't around the coil runs down the air tube when you turn the T3 upside down and loosen up the coil assembly. It shouldn't leak after you fill the T3 and put the coil assembly back in place. This happens to me a lot.

J.R.

I was hoping you would chime in. I believe I read it from you. Old age though mate and couldnt remember. Thanks mate.
 

JoAnnW

Vaping Master
ECF Veteran
Verified Member
Oct 19, 2012
4,602
13,011
B'more MD
I don't know exactly how this happens. I think that the liquid that's around the coil runs down the air tube when you turn the T3 upside down and loosen up the coil assembly. It shouldn't leak after you fill the T3 and put the coil assembly back in place. This happens to me a lot.

J.R.

How can you prevent this from happening? I wiped off the coil assembly before putting it back on but I got gurgling and liquid in my mouth... awful! I tried blowing through the mouthpiece but it didn't stop the gurgling. Then I just dumped it, washed it out and put it away. I'm beginning to prefer the T2 over the T3. Haven't any problems at all with that... so far at least.
 

WorksForMe

Ultra Member
Supporting Member
ECF Veteran
Verified Member
Sep 21, 2012
2,020
4,776
N.N., Virginia
How can you prevent this from happening? I wiped off the coil assembly before putting it back on but I got gurgling and liquid in my mouth... awful! I tried blowing through the mouthpiece but it didn't stop the gurgling. Then I just dumped it, washed it out and put it away. I'm beginning to prefer the T2 over the T3. Haven't any problems at all with that... so far at least.

Did you do any mods to it, like flipping over the cap seal, or removing one or more of the loose "flavor" wicks?

J.R.
 
Status
Not open for further replies.

Users who are viewing this thread