Getting new hardware this week...don't know what to go with. Halp!

[Mlgibson494]

So I currently have an ipv mini that goes to 30 watts, a couple mech mods I never use anymore, and a Hana knockoff (didn't know, or wouldn't have bought. Got it back when I was a clueless noob).

I am insanely jealous of, and constantly use, my friend's Sig 150watt. What I like about it is just that, the wattage. I love vaping at 65-70 watts. Sometimes higher. So I know m just for the sake of saving money later, I want something that gets AT LEAST 100 watts.

But now these tempature regulated mods have hit the market and I have heard wonderful things about the flavor. But is there any that go above 100 watts worth knowing about?

So now I don't know if I should get the Sig 150, the ipv 3...or go down in wattage some but get tempature control. Any suggestions, help, and wisdom is greatly appreciated.

 

[KTMRider]

What is the resistance of your coils? You don't have to build them like you would with a mech mod to get a great vape.

With VW mods, 99% don't need more than 30w. I build my kanthal builds in a KF v4 at 1.5Ω with 28g at 12w and get a great vape. With TP, I build .13Ω with 28g ni200 at 20w and 440°F and get a great vape too.

If you can order one now, Hyperion Vape is having a mother's day sale (Code : "MOM" (with quotes) for 10% off) and they have the Hana Modz v4 DNA40 for $135 shipped. You would need to buy Ni200 (nickel) wire to take advantage of temperature protection or just use kanthal in normal mode.

 

[Mlgibson494]

What is the resistance of your coils? You don't have to build them like you would with a mech mod to get a great vape.

With VW mods, 99% don't need more than 30w. I build my kanthal builds in a KF v4 at 1.5Ω with 28g at 12w and get a great vape. With TP, I build .13Ω with 28g ni200 at 20w and 440°F and get a great vape too.

If you can order one now, Hyperion Vape is having a mother's day sale (Code : "MOM" (with quotes) for 10% off) and they have the Hana Modz v4 DNA40 for $135 shipped. You would need to buy Ni200 (nickel) wire to take advantage of temperature protection or just use kanthal in normal mode.

After trial and error, I go with somewhere between .4 and .7
Any lower, and it can be too much for me and I cough. Any higher and I don't enjoy it. And forgive me, but what is TP?

My ipv mini goes 30 watts but I always enjoy my vaping better with higher watts. It is just my personal preference. I have a friend who vapes and loves just 15 watts but that just isn't for me.

 

[KTMRider]

TP = Temperature Protection.

You need higher watts if you're building coils at .4Ω to .7Ω. If you build 1.2Ω - 1.6Ω, you'll get a similar vape at much lower wattages.

If it's too harsh (coughing), you might want to adjust the nic in your juice. I usually vape 3mg - 6mg nic juices. 3mg for drippers, 6mg for tanks. I still have some 12mg juices that are really harsh in my tanks so I mix them with straight vg liquid to cut down the nic.

What gauge wire are you using?

 

[SissySpike]

IPV 4 79.99 Vape Royalty temp protection dual 18650 goes to 100 watts has a YiHi board in it its a 350 but not a 350 J like the SX Mini but for the price cant go wrong. IPV4 Box Mod 100W by Pioneer4You