- Status
I haven't posted in here in a while, that occurred to me while I was polishing up my GGTS (didn't polish the UFS, though, as is apparent in the pics)
No need to add any additional wicks to insulate the two coils from each other as long as you're careful about their proximity to one another. I've actually found that adding an extra wick seriously inhibits the performance, as it blocks airflow to the top coil.
I've only vaped about 7ml through it, but so far it's actually significantly better than a single coil! TH, vapor, and even flavor are all better, and even the wicking is just as good (if not ever so slightly better). To top it off, the setup is near-effortless when using the pre-made wires and the original 2mm ody wick.
Currently, the resistance is right at around 0.7Ω, so by the time I put around 30ml through it and the resistance is more like 1.2Ω, I think I'll bump it up to 7.4v
Now with Stealth cap, I think it looks much better this way.....Only thing left is the lens for the display..
[/IMG]
[/IMG]
Just kinda curious is that thing as long as it looks? And is the space behind the screen essentially empty? BTW looks great I would love to do something similar but just curious about the setup.
it looks wonderful kill
I haven't posted in here in a while, that occurred to me while I was polishing up my GGTS (didn't polish the UFS, though, as is apparent in the pics)
the higher the better sfera!, cheers buddy
Thanks a lot. I will post higher res tomorrow.
Great rick, thanks for the info buddy
No need to add any additional wicks to insulate the two coils from each other as long as you're careful about their proximity to one another. I've actually found that adding an extra wick seriously inhibits the performance, as it blocks airflow to the top coil.
I've only vaped about 7ml through it, but so far it's actually significantly better than a single coil! TH, vapor, and even flavor are all better, and even the wicking is just as good (if not ever so slightly better). To top it off, the setup is near-effortless when using the pre-made wires and the original 2mm ody wick.
Currently, the resistance is right at around 0.7Ω, so by the time I put around 30ml through it and the resistance is more like 1.2Ω, I think I'll bump it up to 7.4v
your wife has a unique hasband Sneaker. The one that vapes a GGTS!
Dimensions are .65 inch wide or 1.524 cm
1.3 inch long or 3.302 cm
.337 inch thick or 0.85598
Measurments are per spec sheet and converted on google.
The screen is on a ribbon total length of the ribon and screen is 1.573 inch long or 3.99542 cm
Total length if you stretch it all out (not bend the cable) is 2.873 inches long or 7.29742
If I am right because the screen is on a ribon it could be doubled up and you would only need to add a total length of under 2 inches and possibly down to just about 1.5 inches or even less possibly.
Here is a picture.
Yeah that's right Imeo ..you can get all the mechanical dimensions from evolv's site. Its in the PDF data file.
And fright ...it is a little long. The bottom tube is about 10mm longer than the engraved tube, the top tube is about 80mm. Haven't put anything on top of the screen yet. I found a nice piece of tinted plastic lens in my shop I'm going to use my dremel to shape it down to fit. Hopefully it will turn out like it is in my head.
And fright ...it is a little long. The bottom tube is about 10mm longer than the engraved tube, the top tube is about 80mm. Haven't put anything on top of the screen yet. I found a nice piece of tinted plastic lens in my shop I'm going to use my dremel to shape it down to fit. Hopefully it will turn out like it is in my head.
And here she is!
SS GGTS #414 - now with Ody GGTS base and all brand new brass connections and new adjustable draw button. Just using an 18350 battery for now. Still need to polish! I have 3M polishing paper on the way!
SS GGTS #414 - now with Ody GGTS base and all brand new brass connections and new adjustable draw button. Just using an 18350 battery for now. Still need to polish! I have 3M polishing paper on the way!
- Status
