GGTS adjustable draw w/tank mods

[Para]

*Posting here since it's GG specific*

Control where the air comes from and you can use the adjustable draw feature with your tank mods.

I sealed off the batt connector the tank mod screws into; then sealed off the atomizer connector that goes into the GGTS. Since there's little to no air being drawn, I cut a slit on the side of the tube. Now, control the draw with the control ring.

Here's a couple of pics.

....with a MAP Tank mod

...Enjoy !

Updated: When I say "sealed the batt connector", specifically the four air slots. Of course the bottom hole is open since that's where the air is drawn up into the carto tube. The atomizer connector, on the other hand, is totally sealed so the only air is coming through the slit in the tube. Hope that helps

 

[Dustydragon]

nice I'm leaning towards getting a GGTS lol

 

[hamdamann]

dude that is awesome nice work

 

[JollyRogers]

Very nice. Now why didn't I see this BEFORE I bought my GGTS/AVS through the classifieds! Nice work Parallex2.

 

[Para]

Very nice. Now why didn't I see this BEFORE I bought my GGTS/AVS through the classifieds! Nice work Parallex2.

Because I hadn't thought of it yet....lol Since I didn't have an AVS anymore, I had to think of SOMETHING.

 

[JonahNM]

It looks cool. Did you drop one in the mail for me?

 

[Para]

It looks cool. Did you drop one in the mail for me?

Waiting for Madvapes to restock atty connectors

 

[imeothanasis]

para, I missed this thread. I dont know what happened lol. What an exellent trick buddy


maybe thats the way we can make the CR working with Iatty

 

[silentt]

Parallex is great. This is a very good idea.

 

[Para]

para, I missed this thread. I dont know what happened lol. What an exellent trick buddy


maybe thats the way we can make the CR working with Iatty

Thanks Imeo....it's working like a charm. Jonah PM'ed me this week and he's getting the same results. It will work with anything you connect to the top of the GGTS as long as there's a center hole to feed air up into the device. I can't see any reason why the Iatty wouldn't enjoy the same results.

If you look at the picture on the right there's a reflection in the tube slit....that's the SS tubing that provides both + continuity and the actual air feed. By using SS tubing it's virtualy impossible to get a break in continuity or a short....

 

[ainako]

So this is what we would use?
510 Battery Extension

 

[Para]

So this is what we would use?
510 Battery Extension

I use those a lot with my Darwins and it will work as long as you don't mind the connector sticking up 7mm above the draw cap. If you want the tank to mount flush, it was much easier to build one.

 

[ainako]

sounds good, could you tell us the source and dimensions of the tube housing and for the connectors? I may still end up buying the madvapes one as I don't have very good DIY skills. I just got my ggts on preorder and have a jonboyusmc tank waiting for it to show up. The tank should hold me up until the Iatty goes live or until the UFS gets back in stock.

 

[JonahNM]

I am still getting great results with the one I got to test.

 

[imeothanasis]

Guys, I dont know the dimentions of this adapter so better to wait before you buy it. I will tell Bruce to send me one to check it first

 

[hillock]

Good Prophets has extension for 99 cents.
PV Adapters

 

[imeothanasis]

hill, we dont need exactly those adapters. If the big adapter that Para was talking about is ok then we can have it but if not then we need:

801 to 901 and 901 to 510

or

510 to 901 and 901 to 510

or

510 to 801 and 801 to 510

 

[JonahNM]

I thought some of you would like to see it. Imeo said it was ok.

 

[Para]

View attachment 41699

I thought some of you would like to see it. Imeo said it was ok.

One of the first things I did after getting the Torpedo Tank....great tank and even greater with the adjustable draw dialed in.

 

[clyde2801]

This should work with the new dct map tank mods, shouldn't it?