GGTS UFS 6V Vaping

[casualuser]

I think its time I started with the HV vaping. Whats the lowest resistance atomizer I should use in my UFS when vaping at 6 volts?

 

[ken729]

idk, but ikenvape 3.5 ohm high voltage attys performed very well for me.

 

[Moshmarr]

Yep, I like those too. A 3 ohm is probably the lowest you *should* perhaps use, but I've also used a 2.2 ohm joye 510 @6V with liquid control quite open, it works really well for me!

 

[UKtarget]

I've just started using joye 2.2 ohms as well as long as you keep the juice to them they work well

 

[RippleInStillWater]

I had bought some attys in bulk from VK when they were the supplier, 901 regulars work for me!

 

[APM]

I had bought some attys in bulk from VK when they were the supplier, 901 regulars work for me!

how did you put your 901 in the UFS?

 

[buGG]

all you need is a stealth 510-901 adapter and a pipe cutter or those new RIS 901 minis...or maybe he's talking about the avs.

 

[RippleInStillWater]

all you need is a stealth 510-901 adapter and a pipe cutter or those new RIS 901 minis...or maybe he's talking about the avs.

Whoops.......I thought he was talking about the AVS and AFS, I have done it in both and also without a tank, a great drpping atty IMO. I'm sorry, casualuser that I didn't read the title better.....

 

[APM]

all you need is a stealth 510-901 adapter and a pipe cutter or those new RIS 901 minis...or maybe he's talking about the avs.

oh i see, thanks for the info bugg..

 

[casualuser]

Thats okay Ripple. I bought 2 of the Tenergy RCR123A LIFEPO4 750 mah 3.2v - Is there anything I should be aware of when stacking batteries?

 

[RippleInStillWater]

No, I have used the crap out of those things and haven't had one problem -- I have been using the same pairs for a few months fwiw but make sure you have 2 pair backups, rotation, rotation, rotation!!! Also, switch which one is on top , too.

 

[Rick.45cal]

You've got my routine down pat Ripple!

 

[RippleInStillWater]

You've got my routine down pat Ripple!

Others far wiser than me taught that!!! I haven't seen the battery god around in a while..... He was sort of ornery but a great guy!!!

EDIT: Drozd helped me out a lot when I had questions.........

Also, I was smart for once when it came to these -- I bought a ten pack off of amazon and it was extremely reasonable, I don't remember the site (Ooo, big surprise!!!) but, then again, I haven't needed any more!

 

[buGG]

i don't think drozd would have recommended those batteries, but yeah, where has he been? ....hopefully still vaping.

 

[RippleInStillWater]

i don't think drozd would have recommended those batteries, but yeah, where has he been? ....hopefully still vaping.

Yeah, you're probably right!!! I looked, no activity since December, too bad, he really knew his stuff......

I was using a different regulated mod at the time and he recommended AW16340s from what I remember, safer for stacking in that type of mod -- but those were 3.7V.

 

[casualuser]

Gotta say 6v vaping is where it's at. It blows analogs out of the water and haven't given the slightest thought to going back. Anyone have advice on UFS settings though? It's not easy to regulate air and juice control...

 

[B-Rad_The_Mad_Vapr]

I do 7.4v in my UFS with a 5ohm atty... juice wide open and air just cracked & I'm using 70%PG 30%VG

 

[jonah]

i use carts with my UFS blows atties away for performance and you dont have to fiddle with it to get great vape

 

[silentt]

I still don't understand johah. You just use a Cartridge? or Cartomizer?

 

[jonah]

I still don't understand johah. You just use a Cartridge? or Cartomizer?

cartomiser i just cut down 510 carts to the same size as a 510 attie with the ext on and it fits like a glove.

Am using Tubo cartomizers from cloud 9 and vape at 6 and 7.2 with no problems