Count I would have exploded!
12/2 - 3: Welcome collective. Everyone notice that Angel put on her Christmas attire? Hope the rest of the trip goes better Uncle. View attachment 393977
Whoa, no, I hadn't. How unobservant of me.12/2 - 3: Welcome collective. Everyone notice that Angel put on her Christmas attire? Hope the rest of the trip goes better Uncle. View attachment 393977
That's an excellent idea, jpf! I'll have to figure out where I left mine....Count if you have a volt meter you check to see if your getting power to the plug.
I know, right.12/2 - 4: Count sorry to hear about the problems, but the way you are posting it like Star Wars is funny! View attachment 393985View attachment 393985
12/2 - 4: Count sorry to hear about the problems, but the way you are posting it like Star Wars is funny! View attachment 393985View attachment 393985
Seems odd that the delivery/install guys didn't do a power check. Granted they aren't responsible for your house wiring but when the unit didn't work they should have been checking to make sure it was gettinig power.
I just spoke with the guy and told him that I checked it after he left. He admitted that he thought about that, too, but he doesn't carry a meter with him... And, yes, both units work just fine.
I've got a call into the electrician--but I doubt I'll hear back until tomorrow. The Sears guy gave me his cell number so that I can call him when the work is done and he will bring a unit out then and install it. It's better that way because otherwise I'd have to go through the store and I'd probably end up with the first crew again.
12/2 - 5: Have you gone to the breaker and pushed it all the way into the off position and then back forward to the on position? I am an electrician and this is a common problem, that costs people money. Some people see a "tripped" breaker and just push it forward to the on position. That will not work, the breaker must be reset. I am not saying you have not done this, but just trying to put out some info View attachment 394003
That's a good tip, Tiggs. Yes, I did that for the breaker that was labeled dryer (the previous owner of the house long ago had someone mark which circuits went where). For good measure, I also switched off and on the breakers to either side (those flagged as "Washing Machine" and "Range") just in case some thing was wired elsewhere. I couldn't see the numbers on the switches themselves because it was already beginning to get dark (and we've been having rain).
I'm not sure that I actually found the circuit, however, as the delivery guy had the dryer door open to watch the light inside and it never went out and then back on. I was afraid to try any more of the circuits as I had not powered down any of my electronics (such as this computer I'm typing on or the TV which my son was watching). I might try that tomorrow if I have the time.
But let me ask you this: would the outlet for the dryer get any power if it was the circuit? When testing the three-prong plug, my right socket and ground pairing tested at 120 volts, while the left socket and ground pair read a fluctuating 1-10 volts. (Of course the two live sockets failed to achieve the necessary 240 volts.) That tells me that the outlet is providing enough power for the light to turn on, the drum to spin, and the fan to blow, but not enough power to feed the heating element. In other words, the outlet is partially energized. Wouldn't a blow fuse result in no power to the outlet?
Your breaker will be a two pole 30, a single pole 20 is normally used for lighting and plugs in the house. At this moment I would think that the breaker is no longer working and should be replaced, or one of the wires has come loose in the outlet for the dryer. Make sure to turn off the breaker before taking out the outlet to check and see if a wire is loose, or one of the terminals has melted down.
You are correct in that the fuse/breaker being blown, or tripped, would allow no energy to the unit.