GLV 2 is here and pre-order is now open!!!

[youtubecommercial]

LOL Wiz .. yep I'm a pvaholic that will never be cured ......

Thank you Jay, you always give excellent customer service so no worries

YEAH!!!!! My GLV2 is on it's way......

 

[The Wiz]

Where can I buy the 306's? Cant seem to find them. After reading good things about them I would like to give them a try. Also do you need drip tip for them or will a 510 drip tip work?

Blake

Here you go Blake! JOYE306 Atomizers Not sure on the drip tips? doots would know!

Let us know how you like them with the GLV!
The Wiz!

 

[The Wiz]

LOL Wiz .. yep I'm a pvaholic that will never be cured ......

Thank you Jay, you always give excellent customer service so no worries

YEAH!!!!! My GLV2 is on it's way......

Thats ok youtube.....I have two of those listed...So I'm catching up!

You will love your GLV!!
The Wiz!

 

[redgirl]

Where can I buy the 306's? Cant seem to find them. After reading good things about them I would like to give them a try. Also do you need drip tip for them or will a 510 drip tip work?

Blake

Well, The Wiz told you where to get them. You can get drip tips from Nhaler. They also carry LR 306s. I got two of the regular ones. I did what doots did and drilled a hole in the top to be able to drip with them.

I found out the hard way how to get the cover off, though. I kept trying to pull it off with no success. Then Drew told me to attach it to a PV and pull it off. Worked like a charm!

 

[doots]

Well, The Wiz told you where to get them. You can get drip tips from Nhaler. They also carry LR 306s. I got two of the regular ones. I did what doots did and drilled a hole in the top to be able to drip with them.

I found out the hard way how to get the cover off, though. I kept trying to pull it off with no success. Then Drew told me to attach it to a PV and pull it off. Worked like a charm!

LOL Red, I did the same thing the first time I got one. I Couldnt get the top off.. Yes on getting the old drill out and just drill out that center portion. Took 1 minute or less.. The top cap just popped off like a carto does..
Mine are still going strong. I haven't tried the LR 306s yet. The reg ones are so good..

 

[doots]

Here you go Blake! JOYE306 Atomizers Not sure on the drip tips? doots would know!

Let us know how you like them with the GLV!
The Wiz!

Did you try the 306s Wiz?

 

[kevbow]

GLV-2-510 Electronic Cigarette
(Body & End Caps Only)

• Color: - Nebula Green
• Voltage: - 3.6 Volts (resistor installed)

Do you have this in stock? If you do I will order one now. If it could be shipped today that would be even better so I could have it for the NYC meet this Saturday.

 

[The Wiz]

Did you try the 306s Wiz?

Not yet doots.....I'm trying to justify the price difference between 1x306 and 5x SLB 510 cartos. I am really enjoying these now that I know how to maintain them(really nice TH and flavor). I will add a couple next month to my RMV juice order!

The Wiz!

 

[The Wiz]

GLV-2-510 Electronic Cigarette
(Body & End Caps Only)

• Color: - Nebula Green
• Voltage: - 3.6 Volts (resistor installed)

Do you have this in stock? If you do I will order one now. If it could be shipped today that would be even better so I could have it for the NYC meet this Saturday.

Wow....Everyone is meeting this Sat! MI,PA,NY.......This vaping thing is realy starting to catch on!!

The Wiz!

 

[NebulaBrot]

GLV-2-510 Electronic Cigarette
(Body & End Caps Only)

• Color: - Nebula Green
• Voltage: - 3.6 Volts (resistor installed)

Do you have this in stock? If you do I will order one now. If it could be shipped today that would be even better so I could have it for the NYC meet this Saturday.

Geee Kev, NICE color choice!!!
BTW, (and sure Jay will chime in to verify), the device comes in 3.7/6 volts (unresisted) - or 5V resisted. so, I wonder if you might have some slight misunderstanding in asking for "Voltage: - 3.6 Volts (resistor installed)"

To Doots, Red, Wiz and others, here is a little something I have found about certain attys (well, more the tips). I love drip tips but the wider opening (for dripping), to me, changes the flow of the vapor. I have come to really appreciate and enjoy the thin stream of vapor coming thru the tiny little mouthpiece hole. Sometimes I move my tongue in slightly different positions - yea, go ahead, snicker and think "TMI" - but if you try it, bet ya LIKEY to allow that thin stream of vapor to hit different parts of the tongue (sometimes even the underside). Different parts of the tongue, the taste buds respond more to different flavors. So, of course, I have and use drip tips but I also do NOT drill out all my mouthpieces for this very reason. And, if you ever get a bottom feeding mod (I use Journeyman) you can appreciate this all that much more as you never have to drip with bottom feeders. Still hoping Jay considers bottom feed for GLV3 - but I am open to whatever he comes up with.

 

[doots]

Geee Kev, NICE color choice!!!
BTW, (and sure Jay will chime in to verify), the device comes in 3.7/6 volts (unresisted) - or 5V resisted. so, I wonder if you might have some slight misunderstanding in asking for "Voltage: - 3.6 Volts (resistor installed)"

To Doots, Red, Wiz and others, here is a little something I have found about certain attys (well, more the tips). I love drip tips but the wider opening (for dripping), to me, changes the flow of the vapor. I have come to really appreciate and enjoy the thin stream of vapor coming thru the tiny little mouthpiece hole. Sometimes I move my tongue in slightly different positions - yea, go ahead, snicker and think "TMI" - but if you try it, bet ya LIKEY to allow that thin stream of vapor to hit different parts of the tongue (sometimes even the underside). Different parts of the tongue, the taste buds respond more to different flavors. So, of course, I have and use drip tips but I also do NOT drill out all my mouthpieces for this very reason. And, if you ever get a bottom feeding mod (I use Journeyman) you can appreciate this all that much more as you never have to drip with bottom feeders. Still hoping Jay considers bottom feed for GLV3 - but I am open to whatever he comes up with.

good points made Neb...

 

[$hua]

To Doots, Red, Wiz and others, here is a little something I have found about certain attys (well, more the tips). I love drip tips but the wider opening (for dripping), to me, changes the flow of the vapor. I have come to really appreciate and enjoy the thin stream of vapor coming thru the tiny little mouthpiece hole. Sometimes I move my tongue in slightly different positions - yea, go ahead, snicker and think "TMI" - but if you try it, bet ya LIKEY to allow that thin stream of vapor to hit different parts of the tongue (sometimes even the underside). Different parts of the tongue, the taste buds respond more to different flavors. So, of course, I have and use drip tips but I also do NOT drill out all my mouthpieces for this very reason. And, if you ever get a bottom feeding mod (I use Journeyman) you can appreciate this all that much more as you never have to drip with bottom feeders. Still hoping Jay considers bottom feed for GLV3 - but I am open to whatever he comes up with.

and here i was thinking i was the only one... Given certain juices.. a particular brand of Banana in fact.. Vaping through the small hole of a carts mouthpiece, some how concentrates the vapor to a single point on my tounge. putting my tounge directly to the hole while i vape cause a saturation point wherever on my tounge it hits.. very nice feeling..

 

[kevbow]

Geee Kev, NICE color choice!!!
BTW, (and sure Jay will chime in to verify), the device comes in 3.7/6 volts (unresisted) - or 5V resisted. so, I wonder if you might have some slight misunderstanding in asking for "Voltage: - 3.6 Volts (resistor installed)"

To Doots, Red, Wiz and others, here is a little something I have found about certain attys (well, more the tips). I love drip tips but the wider opening (for dripping), to me, changes the flow of the vapor. I have come to really appreciate and enjoy the thin stream of vapor coming thru the tiny little mouthpiece hole. Sometimes I move my tongue in slightly different positions - yea, go ahead, snicker and think "TMI" - but if you try it, bet ya LIKEY to allow that thin stream of vapor to hit different parts of the tongue (sometimes even the underside). Different parts of the tongue, the taste buds respond more to different flavors. So, of course, I have and use drip tips but I also do NOT drill out all my mouthpieces for this very reason. And, if you ever get a bottom feeding mod (I use Journeyman) you can appreciate this all that much more as you never have to drip with bottom feeders. Still hoping Jay considers bottom feed for GLV3 - but I am open to whatever he comes up with.

I actually copied and pasted that off of his website. I was about to check out and realized that I should probably ask if he has them in stock. I'm already waiting on one mod and really don't want to have to wait on another. Thanks for the info.

 

[NebulaBrot]

I actually copied and pasted that off of his website. I was about to check out and realized that I should probably ask if he has them in stock. I'm already waiting on one mod and really don't want to have to wait on another. Thanks for the info.

Actually, I was not completely correct because if you want the mini - that one is just 3.7 (but still no resistor). I am fairly certain that the mini 3.7 and the 3.7/6V versions both use the same headpiece (just different length bodies). I am also fairly certain that the resistor is only for the 5V version.

But MOST importantly, just in case I was not completely clear before, I REALLY like your color choice!!! Mine has the unpowdered end pieces (Think they are clear coated tho). But, I suspect the Solar Rain color on the end pieces might look really good too.

 

[doots]

Actually, I was not completely correct because if you want the mini - that one is just 3.7 (but still no resistor). I am fairly certain that the mini 3.7 and the 3.7/6V versions both use the same headpiece (just different length bodies). I am also fairly certain that the resistor is only for the 5V version.

But MOST importantly, just in case I was not completely clear before, I REALLY like your color choice!!! Mine has the unpowdered end pieces (Think they are clear coated tho). But, I suspect the Solar Rain color on the end pieces might look really good too.

Neb, you are correct. The head is the same for 3.7/6v, just the tube size is different. 5v is the only head with resistor in it.

 

[The Wiz]

Geee Kev, NICE color choice!!!
BTW, (and sure Jay will chime in to verify), the device comes in 3.7/6 volts (unresisted) - or 5V resisted. so, I wonder if you might have some slight misunderstanding in asking for "Voltage: - 3.6 Volts (resistor installed)"

To Doots, Red, Wiz and others, here is a little something I have found about certain attys (well, more the tips). I love drip tips but the wider opening (for dripping), to me, changes the flow of the vapor. I have come to really appreciate and enjoy the thin stream of vapor coming thru the tiny little mouthpiece hole. Sometimes I move my tongue in slightly different positions - yea, go ahead, snicker and think "TMI" - but if you try it, bet ya LIKEY to allow that thin stream of vapor to hit different parts of the tongue (sometimes even the underside). Different parts of the tongue, the taste buds respond more to different flavors. So, of course, I have and use drip tips but I also do NOT drill out all my mouthpieces for this very reason. And, if you ever get a bottom feeding mod (I use Journeyman) you can appreciate this all that much more as you never have to drip with bottom feeders. Still hoping Jay considers bottom feed for GLV3 - but I am open to whatever he comes up with.

Neb....Like the others here have mentioned...Good Points! I just started using drip tips with my 510 attys and carto's...and to be honest I prefer the wider opening. It just seems to provide a better TH for me. I still use my flat rubber tips when vaping with my 801....something about the smaller opening with that particular atty makes for an all around better vape!

Bottom or top feed.....Jay really needs to get busy on the GLV-3

The Wiz!

 

[jaybird]

GLV-2-510 Electronic Cigarette
(Body & End Caps Only)

• Color: - Nebula Green
• Voltage: - 3.6 Volts (resistor installed)

Do you have this in stock? If you do I will order one now. If it could be shipped today that would be even better so I could have it for the NYC meet this Saturday.

I do have it in stock but no way I could get it out today for sure. The best I could do is next week sorry. I have a whole bunch of people that would kill me if I bumped you to the head of the line lol.

Bad news my cheap a@# powder coater broke for good today and is not fixable. I so only on GLV went out today. I just got back from picking up another cheap coater ,but I ordered a real nice one today. I should be back in business later on tonight. I did pick up more stock today for pre-orders and kits on the site. x40 long bodies x40 minis. these will go quick so i ordered another 80 today.

To all of you that ordered a body only kit , I am very sorry about the hold up but I am working on getting your GLVs out all night tonight so hang in there. For everyone else things are right on track with the etcher and today's mishap will not slow your order at all.

 

[jaybird]

Bottom or top feed.....Jay really needs to get busy on the GLV-3

The Wiz![/QUOTE]
I am lol . It's being developed as we speak...the shop is working out the cnc programs and such.

 

[doots]

Bottom or top feed.....Jay really needs to get busy on the GLV-3

The Wiz!

I am lol . It's being developed as we speak...the shop is working out the cnc programs and such.[/QUOTE]

very nice jay////////////////////////

 

[jaybird]

One more thing before I go to the shop (my garage lol). This Sunday the GLV for free giveaway will be back and the prize will be a matching set of GLVs + x2 batteries and charger.. one mini , one 5v,.. the color of your choice.