GLV 2 is here and pre-order is now open!!!

[Bustastew]

The only GLV-2 Weakness:

The connection from the atty to the unit.. The sodder is weak and forms to the atty. Mine has deformed to only fit my 801's. Now 510 attys/cartos will not make the connection and work. Jay have you seen the buzz's atty connection? Its a screw. I would pay extra for a GLV with that screw =)

 

[fmx]

You cant trust USPS confirmation emails. I have have had so many things delivered before they even show it on their website.
Dont believe what you see. Most of these are not scanned by usps at every step or dont even show at all until they are actually delivered.

I agree the USPS tracking system is totally weak. But - I've never seen a package entered into the system 7 days ago not so much as register (i.e. "no record of this item"). This sucks, I want my new toy.

 

[Youthful313]

I got mine today. Taking it with me to class. I'll put pics up later

 

[fmx]

The only GLV-2 Weakness:

The connection from the atty to the unit.. The sodder is weak and forms to the atty. Mine has deformed to only fit my 801's. Now 510 attys/cartos will not make the connection and work. Jay have you seen the buzz's atty connection? Its a screw. I would pay extra for a GLV with that screw =)

Isn't the GLV manufactured to fit one or the other? Can't you just use an adapter?

 

[fmx]

Jay - my order just updated... Did you just now mail it out?

Your item was accepted at 12:27 pm on September 15, 2010 in FARMINGTON, MI 48336. Information, if available, is updated periodically throughout the day. Please check again later.

 

[Youthful313]

Jay - my order just updated... Did you just now mail it out?

Your item was accepted at 12:27 pm on September 15, 2010 in FARMINGTON, MI 48336. Information, if available, is updated periodically throughout the day. Please check again later.

When you get that msg that means it'll be at your house in 2-3 days.

 

[Youthful313]

here's some pics:

sorry the pics are kinda blurry. I love the GLV it does have a harder pull to it though. I know if I 1/4 turn it it should work better but when I do that it doesn't connect anyone have any good ideas?

 

[doots]

here's some pics:

sorry the pics are kinda blurry. I love the GLV it does have a harder pull to it though. I know if I 1/4 turn it it should work better but when I do that it doesn't connect anyone have any good ideas?

I always use an atty adapter with the GLV to get the best airflow. Eliminates all problems.

 

[Youthful313]

I use 510 cartos though so how/where do I get a 510 to 510 adapter?

 

[doots]

I use 510 cartos though so how/where do I get a 510 to 510 adapter?

you need a 510 to say a 801 and then an 801 back to 510. or
510>901 and 901>510

either will work and work well! So you will be ordering 2 adapters but they are small and screw them together and then screw it on your 510 connection on the GLV.

 

[Big Chiefer]

This may have already been addressed in this thread, but I don't want to read through the whole thing. Will the GLV-2 accept an eGo XL atomizer?

 

[Chelseafn]

Youthful. some of the 510 cartos wont work for some reason. The best ones I have tried are the High Performance ones from cloudsofvapor. Those things kick on the GLV. I think nhaler sells them too. Maybe some other places with different names for the cartos. But I would think any HV Carto would work. Dont really know since I only use the ones from COV.

 

[doots]

This may have already been addressed in this thread, but I don't want to read through the whole thing. Will the GLV-2 accept an eGo XL atomizer?

it does but you have to use an adapter like a 510>901 and then 901>510 etc. works very well..

 

[fmx]

here's some pics:

sorry the pics are kinda blurry. I love the GLV it does have a harder pull to it though. I know if I 1/4 turn it it should work better but when I do that it doesn't connect anyone have any good ideas?

Love it! Looks like gunmetal.

 

[Crimmy]

This may have already been addressed in this thread, but I don't want to read through the whole thing. Will the GLV-2 accept an eGo XL atomizer?

Yes but you need to get two adaptors I use a 510batt to 801atty and a 801atty to 510 batt. Or you can use the 510batt to 901atty and a 901atty to 510batt. I think you can see what I mean here. I am not sure of the 901 though never tried it. That is my next step cuz its shorter over all. but if you use the 510 and 801 set up it adds exactly 1/4" to the length overall.

 

[Bustastew]

I use an adapter to fit the 801 to the 510 connection. The solder inside is now warped to only fit my adapter and now normal 510's don't work...

 

[mistinthewoods]

Why don't y'all just use 808 cartos and one adapter. seems simpler. 808s are at least as good as any 510 carto I've tried. Hell, I like 'em a little better.

 

[RedAlert]

I have read some people say there is astiff draw to the GLV2, mine draws perfect. Is it maybe atty differences?

 

[Chelseafn]

to get the Ego carto to work get the joye ac charger adapter from cignot. It works really well and thats the only adapter you need. Its about an inch long. I think its like 4.00.

 

[mistinthewoods]

A friend of mine gave me an 801 carto that holds 40 some drops of liquid and a 510/801 adapter yesterday and I think I like these things..... a lot!