GLV2 With V4L Cool Carts?

Status
Not open for further replies.

th1986

Full Member
Oct 20, 2010
20
0
38
michigan
Ordered a few different style V4L (along with other manufacturers carto's) ,and out of the 3 (premium,wow,coolcart) the cool cart doesn't seem to work on 5v. Working on 3.5 , and the WOW/Premium work on 3.5v/5v but not the darn cool carts.

My GLV2 came with a 510 connector so i am using a adapter piece to hook up the kr808's.

Any suggestion?

Also when i first recieved my GLV2 510 carto's would work fine. Than i managed to break a 510 carto off in the GLV and since can't use 510 carto's (which was 100% my fault). Pretty sure i was told to get another adapter and that should solve it (so use 2 adapters , first the one which lets me use my kr808 and than put one that converts that to 510 on top?)...

Thanks for any suggestions and I'll likely email V4L also about the Cool Carts not running. A shame because it was the favorite of the 3 on the 3.5v and was bummer when it wouldn't fire on my GLV
 

GIOVANNI

Full Member
Oct 24, 2010
19
0
46
Maine
I got the GLV2 also and have been using it with V4L cartos. I got an addapter to do it to. Mine is the 5v regulated model. As far as answering your question about using your 510's after using and 808 addapter you have to make sure you are getting contact to the center post. Some of those addapters are a bit longer than normal 510 threads. To fix this you would need to remove the plastic button on the underside of the head cap, after removed you can use a small drill bitt (blunt end) to push up the center post alittle bit. BE GENTLE. Dont worry too much about pushing it up too far cause when you srew in your 510 atty it will push it back down to the right hight. You may want to stay with one atty or the addapter and not flop back and forth too much. You would need to repeat this step between each change. If you need a new insert you can allway send it back to jay and he will prob fix it. Hope that helps.
 
Status
Not open for further replies.

Users who are viewing this thread